Sharp Xg Nv5xu Projector User Manual

E-20
Operation
Using the GUI (Graphical User Interface) Menu Screens
Menu bar in COMPUTER ModeThis projector has two sets of menu screens (Computer/
Video) that allow you to adjust the image and various
projector settings. These menu screens can be
operated from the projector or the ÒPowerÓ remote
control with the following buttons.
(For use with the ÒPowerÓ remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU to display the COMPUTER or VIDEO
mode menu bar.
2Press §/© to...

E-21
Operation
Items on the COMPUTER1 or COMPUTER2
Mode Menu BarItems on the VIDEO Mode Menu Bar Using the GUI (Graphical User Interface) Menu Screens
CONTRAST PICTURE
AUTO SYNC FINE SYNC
AUDIO`30 130
CLOCK`90 190
TREBLE
OPTION LAMP TIMER
LANGUAGE ENGLISH
PRJ MODE
STATUSCEILING`FRONT
CEILING`REAR DEUTSCH
ESPAÑOL
NEDERLANDS
FRANÇAIS
ITALIANO
SVENSKA
FRONT
REAR AUTO SYNC DISP
BLK SCRN DISP
OSD DISPLAY
FIT TO SCREEN[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
SIGNAL
BACKGROUND SHARP
RESOLUTION
VERT FREQ
HOR...

E-22
Operation
¥ The IrCOM function can be used to wirelessly transfer
still images from a computer, handheld P/C or digital
camera to the projector via infrared communication.
This function is used with the supplied Sharp
Advanced Presentation Software. See the operation
manual of the software for installation and operating
instructions.
¥ Position the projector and the IrCOM transmitting
device within the range shown on the left.
¥ To avoid transmission errors or changes in the image, ensure
the...

E-23
Operation
Selecting the On-screen Display Language
English is the preset language for the On-screen
Display. It can be changed to English, German, Spanish,
Dutch, French, Italian, Swedish or Japanese.
(For use with the ÒPowerÓ remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU.
2Press §/© to select ÒLanguageÓ.
3Press  ¶/Ä to select the desired language .
4Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5To...

E-24
Operation
ONMUTE
TOOLS
R-CLICK ENTER
INPUTIrCOM
FREEZE
AUTO SYNC
MENU LASERBLACK
SCREEN
VOL
OFF
4 2, 3 1, 5
Picture Adjustments
You can adjust the projectorÕs picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
For less contrast
For less brightness
For weaker red
For weaker blue Selected item in
COMPUTER mode
Contrast
Bright
Red
Blue
ResetFor more contrast
For more brightness
For stronger red
For stronger blue
§ button© button
All computer adjustment...

E-25
Operation
Audio Adjustments
This projectorÕs audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(For use with the ÒPowerÓ remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU. Menu bar and ÒPictureÓ menu
screen appears. GUI Operation guide is also dis-
played.
2Press §/© to select ÒAudioÓ.
3Press ¶/Ä to select a specific adjustment item.
4Press §/© to move the 
mark of the...

E-26
Operation
Computer Image Adjustments
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust ÒClockÓ, ÒPhaseÓ,
ÒH-PosÓ and ÒV-PosÓ for optimum computer image.
¥ Computer image adjustment can be made easily by
pressing AUTO SYNC () on the projector or the ÒPowerÓ
remote control. See the next page for...

E-27
Operation
Auto Sync Adjustment
¥ Used to automatically adjust a COMPUTER image.
¥ Auto Sync adjustment can be made manually by
pressing AUTO SYNC on the projector or the ÒPowerÓ
remote control, or automatically by setting ÒAuto SyncÓ
to ÒONÓ in the projectorÕs GUI menu.
When ÒAuto SyncÓ is set to ÒONÓ:
¥ The sync adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
¥ The Auto Sync adjustment setting previously made...

E-28
Operation
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect the computer to the projector.
Saving the adjustment setting
(For use with the ÒPowerÓ remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU.
2Press §/© to select ÒFine SyncÓ.
3Press ¶/Ä to select ÒSave SettingÓ, and then press
©.
4Press ¶/Ä...

E-29
Useful Features
Digital Image Magnification and Reduction
This function allows you to magnify or reduce a specific
portion of an image. This is useful when you want to
display a detailed portion of the image or display it in
its native resolution.
(To use the ÒPowerÓ remote control to operate this
function, slide the MOUSE/ADJUSTMENT switch to
the ADJ. position before pressing ENLARGE.)
1Press ENLARGE. A rectangle appears on the
screen.
2Press ¶/Ä/§/©  to select the area of the image
you want to...