Sharp Xg Nv51xe Projector User Manual

18
Operation
Basic Operations
1 Connect the Power Cord
Plug the supplied power cord into the AC socket on the
back of the projector.
2 Turn on the Main Power
Press the MAIN POWER switch on the back of the
projector. The POWER indicator lights up red and the
projector enters standby mode.
•If the bottom filter cover is not securely installed, the POWER
indicator flashes.
•When the main power is not on, the “Power” remote control
cannot be used.
3 Turn on the Lamp Power
Press POWER ON on the projector or...

19
Operation
Basic Operations
7 Adjusting the Volume
a. Press VOLUME 
/VOLUME  on the projector
or the “Power” remote control to adjust the volume.
b. Press MUTE on the projector or the “Power”
remote control to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
8 Turning off the Power
1. Press POWER OFF on the projector or the
“Power” remote control. The screen on the left will
appear.
2. Press POWER OFF again while the screen is
displayed.
•If you accidentally pressed POWER...

20
Operation
Using the GUI (Graphical User Interface) Menu Screens
This projector has two sets of menu screens (Computer/
Video) that allow you to adjust the image and various
projector settings. These menu screens can be
operated from the projector or the “Power” remote
control with the following buttons.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU to display the COMPUTER or VIDEO
mode menu bar.
2Press ß/© to select an adjustment menu on...

21
Operation
Items on the COMPUTER1 or
COMPUTER2 Mode Menu Bar Using the GUI (Graphical User Interface) Menu Screens
Contrast Picture
Auto Sync Fine Sync
Audio
30 30
Clock
90 90
Treble
Options Lamp Timer
Language English
PRJ Mode
StatusCeiling
Front
Ceiling
Rear Deutsch
Español
Nederlands
Français
Italiano
Português
Front
Rear Auto Sync Disp
BLK SCRN Disp
OSD Display
Fit To Screen[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
Signal
Background Sharp
Resolution
Hor Freq
Vert Freq640480
37.5 kHz
72 Hz...

22
Operation
•The IrCOM function can be used to wirelessly transfer
still images from a computer, handheld P/C or digital
camera to the projector via infrared communication.
This function is used with the supplied Sharp
Advanced Presentation Software. See the operation
manual of the software for installation and operating
instructions.
•Position the projector and the IrCOM transmitting
device within the range shown on the left.
•To avoid transmission errors or changes in the image, ensure
the following...

23
Operation
Selecting the On-screen Display Language
ONMUTE
TOOLS
R-CLICK ENTER
INPUTIrCOM
FREEZE
AUTO SYNC
MENU LASERBLACK
SCREEN
VOL
OFF
4 2, 3 1, 5
Projector
(GUI) On-screen Display
MOUSEADJ.
English is the preset language for the On-screen
Display. It can be changed to English, German, Spanish,
Dutch, French, Italian, Swedish, Portuguese, Chinese,
Korean or Japanese.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU.
2Press ß/© to select...

24
Operation
ONMUTE
TOOLS
R-CLICK ENTER
INPUTIrCOM
FREEZE
AUTO SYNC
MENU LASERBLACK
SCREEN
VOL
OFF
2, 3 1, 4
Picture Adjustments
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
For less contrast
For less brightness
For weaker red
For weaker blue Contrast
Bright
Red
Blue
ResetFor more contrast
For more brightness
For stronger red
For stronger blue
ß button© button
All computer image adjustment items are returned to the...

25
Operation
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU. Menu bar and “Picture” menu
screen appear. GUI Operation guide is also dis-
played.
2Press ß/© to select “Audio”.
3Press ∂/ƒ to select a specific adjustment item.
4Press ß/© to move the 
mark of the selected
adjustment...

26
Operation
Computer Image Adjustments
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for optimum computer image.
•Computer image adjustment can be made easily by
pressing AUTO SYNC () on the projector or the “Power”
remote control. See the next page for...

27
Operation
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by
pressing AUTO SYNC on the projector or the “Power”
remote control, or automatically by setting “Auto Sync”
to “ON” in the projector’s GUI menu.
When “Auto Sync” is set to “ON”:
•The sync adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
•The Auto Sync adjustment setting previously made is...