Sharp Xg Nv3xu Projector User Manual

E-1
Dear SHARP Customer
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the
most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you have the ability to adjust the picture and color to your personal viewing preference.
We sincerely hope that you will be...

E-2
Important Safeguards
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to ensure
your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
In order not to defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its
installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to
read these ÒImportant SafeguardsÓ carefully...

E-3
14. LightningÑFor added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will pre-
vent damage to the product due to lightning and power-line surges.
15. OverloadingÑDo not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
16. Object and Liquid EntryÑNever push objects of any kind...

E-4
Notes on Operation
About the Temperature Monitor Function:
¥ If the projector starts to overheat due to set-up problems or a dirty air filter, ÒTEMP.Ó will flash
in the upper-left corner of the picture. If the temperature continues to rise, then the lamp will
turn off, the TEMPERATURE WARNING indicator will flash, and after a 90-second cooling-off
period the power will shut off. Refer to page 30, ÒMaintenance Indicators,Ó when the ÒTEMP.Ó
warning appears in the picture.
¥ The cooling fan regulates...

E-5
Location of Controls
FRONT VIEW
Cautions:
¥ The exhaust vent, the lamp cage cover and adjacent areas may be
extremely hot during projector operation. To prevent injury, do not
touch these areas until they have sufficiently cooled.
¥ Allow at least 4( (10 cm) of space between the cooling fan (exhaust
vent) and the other nearest wall or obstruction.
¥ If the cooling fan becomes obstructed, a protection device will
automatically turn off the projector lamp. This does not indicate a
malfunction. Remove...

E-6
Position of MOUSE/ADJUSTMENT switch
BLACK SCREEN (RED)
ON (RED)
ADJ.
MENU (RED)
ENTER (RED)
ADJ. §/©, Ä/¶ (NOT LIT)
Ñ
Operating the Wireless Mouse Remote Control
The functions of your personal computerÕs mouse have been built into the remote control enabling you to operate
your projector and personal computer with the remote control.
1. Slide the MAIN POWER switch on the rear of the projector on.
2. Press the POWER ON button on the front panel of the remote control to turn the projector power on.
3....

E-7
Inserting the batteries
Remove the battery cover as shown and insert four AA
size batteries making sure their polarities match the (`)
and (1) marks inside the battery compartment.
Notes:
Incorrect use of batteries may cause them to leak or burst.
¥ Insert the batteries with the (`) and (1) polarities as indi-
cated.
¥ Remove the batteries if the remote control will not be oper-
ated for an extended period of time.
¥ Maintain the batteries in a clean condition.
¥ Do not mix different brands of...

E-8
Wireless Mouse Functions
Connection ExampleThe wireless mouse functions and laser pointer on the
remote control can help you create a more professional
presentation.
¥ By connecting the supplied computer control cable to the
PC CONTROL terminal on your projector and the supplied
mouse control cables to the mouse terminal on your
personal computer, you can use the wireless mouse on the
remote control, instead of the mouse equipped with your
personal computer, to operate your personal computer.
The...

E-9
Setting Up the Projector
Using the Focus and Zoom
¥ Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector placement.
¥ See pages 10, 11 and 12 for details on projector setup.
SIDE VIEW
1. Turn on the MAIN POWER.
Turn on the MAIN POWER switch on the back of the
projector.
2. Turn on the POWER.
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control to turn on the
power.Table setting
Zoom
3. Rotating the zoom ring (from the
housed...

E-10
Height of Projector
Adjust to match the setup configuration.
Projector Distance and Picture Size Relationship
¥ The zoom lens allows adjustment of the image size within the projectorÕs range.
¥ For optimum picture adjustment, the projector should be placed and adjusted at a distance between 4.6 ft
(1.4Ê m) and 57.4 ft (17.5 m) from the screen.
Maximum projection distance
57.4 ft (17.5 m)
38.4 ft (11.7 m)
28.5 ft (8.7 m)
19.0 ft (5.8 m)
15.1 ft (4.6 m)
11.5 ft (3.5 m)
7.5 ft (2.3 m)Minimum projection...