Sharp Xg F315x Projector User Manual

							37
Useful
Features
SEL./ADJ. ENTER END
Pict. SCR
PRJ-ADJNet. Help
Auto Power Off
System Sound
System Lock hOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100%
Auto Sync On
Speaker OnAudio Input Audio 1RS-232C 9600bpsFan Mode Normal
Disable
Main menu Sub menuPRJ - ADJPage 46
STANDBY Mode
System Sound [On/Off]
Speaker [On/Off]
System Lock
[Enable/Disable]
Lamp Timer(Life)Page  46
Auto Restart [On/Off]Page  46
Auto Power Off [On/Off]Page  46
Page  46
Page  46
Page  47
Page  48
Fan ModePage  47Normal
High
RS-232CPage
 479600bps
115200bps
Audio InputPage
 47Audio 1
Audio 2 Standard
Eco
Auto Sync [On/Off]
Page
 46
SEL./ADJ. ENTER END
Pict.
SCR-ADJ PRJ Net. Help
Resize
Image Shift 0 0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language Front
English On Logo
On
Auto Keystone On Border
Main menu Sub menuSCR - ADJ
Page
 44
Language
Image Shift Resize
Page
 44
Page  44
Page  44
Page  45
Page  45
Page  45
Page  45
Page  45
Keystone
OSD Display [On/Off]
Page  44Auto Keystone [On/Off]
Background
Setup Guide [On/Off]
PRJ Mode Logo
Blue
None
Front
Ceiling + Front
Rear
Ceiling + Rear
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
polski
Türkçe
+80
-80
+96
-96
Normal
Full
Dot By Dot
Area Zoom
V-Stretch
Border
Stretch Normal
Area Zoom
V-Stretch
Border
Stretch
COMPUTER/
DTV
VIDEO/
S-VIDEO
“Projector adjustment (PRJ-ADJ)” menu
“Screen adjustment (SCR-ADJ)” menu 
						

							38
SEL ENTER END
Pict. SCR PRJ Net.
Help
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settingsSEL.
The items you can set with the “Help”
menu
“Help” menu  n Page  51•Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
• Data image is not centered
Auto Sync
H-Pos
V-Pos
• Color is faded or poor
COMPUTER/COMPONENT or DVI input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input Video System: Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
DVI (Digital) input
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the in- put signal and the selected input mode.
Main menuNetworkPage  49Password [Enable/Disable]
DHCP Client
 [On/Off]
TCP/IP
MAC Address
ProjectorPage  49
Page  50
Page  50
Page  50
Page  50
“Network” menu
“Help” menu
SEL./ADJ. ENTER END
Pict. SCR PRJ
NetworkHelp
Password Disable
DHCP Client Off
TCP/IP
MAC Address
Projector
XX : XX : XX : XX : XX : XX
XX-XXXX
Menu Items (Continued) 
						

							39
Useful
Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press  MENU/HELP .•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for COMPUTER (RGB) input
Press Q or  O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0 0
0
Bright
Standard
SEL./ADJ. ENTER END
Picture
SCR PRJ Net. Help
0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
0On
Bright
Reset
Adjustment buttons ( P/R /O /Q )
MENU/HELP button
ENTER button
Adjustment buttons
(P /R /O /Q )
ENTER button
RETURN button
•P ress  RETURN  to return
to the previous screen
when the menu is
displayed.
MENU/HELP button 
						

							40
Using the Menu Screen (Continued)
Press P or  R and select “Bright”
to adjust.
• The selected item is highlighted.
•P ress  ENTER  again to return to the pre-
vious screen.
Press  O or  Q to adjust the item
selected.
• The adjustment is stored.
Press  MENU/HELP .•The menu screen will disappear.
3
4
5
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode Contrast 0
0Standard
SEL./ADJ. Single ADJ END
Picture
SCR PRJ Net. Help
0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
0On
Bright
Reset
15
Bright
Note
Picture Mode
Standard
SEL./ADJ. Single ADJ END
Pict. SCR-ADJ PRJ Net. Help
Resize
Image Shift 0 0
Keystone
OSD DisplayBk d LOn
Auto Keystone On Border
Picture Mode
Contrast 0
0
Standard
SEL./ADJ. END
Picture
SCR PRJ Net. Help
0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
0On
Bright
Reset
Bright 0
Items to be adjusted
•M enu buttons do not function while the projector is operating the “Auto Sync”, “Break Timer”,
“FREEZE”, or “AV MUTE” functions.
Note
To  adjust the projected
image while watching it
Press  ENTER .•The selected item (e.g. “Bright”) is dis-
played by itself at the bottom of the
screen.
•W hen pressing  P or  R, the following item
(“Red” after “Bright”) will be displayed.
The item displayed by itself
Press  ENTER . 
						

							41
Useful
Features
Picture Adjustment (“Picture” Menu)
Standard
Presentation
Movie
Game
*sRGB
Q PAGE1 QPAGE2
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END
Picture
SCR PRJ Net. Help
0
0
Red
Blue
1
2
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduction of
images from a computer.
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S. Standard
SEL./ADJ. ENTER END
Picture
SCR PRJ Net. Help
Progressive
Lamp Setting
0
1
On
3D Progressive
Bright
Reset
65 4
23
Menu operation  n Page  39
•You can also press  PICTURE MODE on the remote control to select the picture mode. (See page  34.)•*sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB”\
 is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColor
TM”, when “sRGB” is selected.
Note
1
1 1
1
1
Selecting the Picture Mode
•When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.
Info
•“sRGB” is displayed only when RGB signal is input.
•Y ou can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
r etained in memory.
0
0
–1 0
– Bright
Bright
Eco + Quiet Bright
Bright
The default settings of each item when selecting Picture Mode
1
2
0
1–
CLR Temp
Selectable
items Description
BrilliantColorTMLamp Setting 
						

							42
Picture Adjustment (“Picture” Menu)
(Continued)
2
2 2
2
2
Adjusting the Image
*1 Not displayed in the RGB input mode.
*2 Not adjustable/selectable when selecting “sRGB”.
*3  BrilliantColor™ uses Texas Instruments’
BrilliantColor™ technology. As the BrilliantColor™
level is increased, the image becomes brighter
while the color reproduction is kept at a high level.
Q  button
For morecontrast.
For more
brightness.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.For stronger red.For stronger blue.For making the
effect stronger.
Adjustment
items
Contrast
Bright
Color*1
Tint*1
Sharp*1
Red*2
Blue*2
BrilliantColor™*2 *3
O  button
For lesscontrast.
For less
brightness.
For less color
intensity.
For making skin
tones purplish.
For less
sharpness.For weaker red.For weaker blue.For making the
effect weaker.
Note
•“Red”, “Blue”, “BrilliantColorTM” and “CLR
T emp” cannot be set when “sRGB” is selected.
•T o reset all adjustment items, select “Reset”
and press  ENTER.
3
3 3
3
3
Adjusting the Color
Temperature
•V alues on “CLR Temp” are only for general
standard purposes.
Note
Selectable
items
–10
1 Description
For lower color temperature for
warmer, reddish incandescent-like
images.
For higher color temperature for
cooler, bluish, fluorescent-like images.
Menu operation  n Page  39
P
R
4
4 4
4
4
Adjusting the Colors
This function adjusts each of the six main colors
that comprise the color wheel, altering their
“Hue”, “Saturation”, or “Value”.
Selectable items
C.M.S.-Hue
C.M.S.-Saturation
C.M.S.-Value
Reset
Description
Sets the hue of the main colors.
Sets the saturation of the main
colors
Sets the brightness of the main
colors.
The adjustments of “Hue”,
“Saturation” and “Value” of all
colors are reset to the default
setting.
Adjusting “Hue”, “Saturation”, or “Value”.
1Select “On” for “C.M.S. Setting” in the “Picture”
menu and then press  ENTER.
2Select “C.M.S.” in the “Picture” menu and then
press ENTER .
3Press P or  R to select either “Hue”, “Saturation”, or
“Value” and then press  ENTER.
4Select the color to be adjusted with  P or  R and
adjust it with  O or  Q.
Example of adjusting the “Hue”
• When “Saturation” is selected, the selected
color becomes
O: lighter.   Q: thicker.
• When “Value” is selected, the selected color
becomes
O: darker.   Q: brighter.
• To  reset the adjustment values of each color
to the default settings, select “Reset” and press
ENTER .
Main colors
R (Red)
Y (Yellow)
G (Green)
C (Cyan)
B (Blue)
M (Magenta)
O button
Closer to magenta
Closer to red
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Q button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red 
						

							43
Useful
Features
5
5 5
5
5
Progressive
•In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be selected.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Selectable
items
2D
Progressive
3D
Progressive
Film Mode Description
Useful to display fast-moving images
such as sports.
Useful to display relatively slow-
moving images such as drama and
documentary more clearly.
Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
Note
6
6 6
6
6
Lamp Setting
•In the Eco + Quiet mode, the fan sound and
power consumption are lower than those in
the Bright mode. (Projection brightness de-
creases as shown in the chart.) The lamp life
will be approximately 3,000 hours (approxi-
mately 2,000 hours in the Bright mode).
Note
Selectableitems
Eco + Quiet
Bright Brightness and Power consumptionApprox. 80%
100%
Menu operation  n Page  39 
						

							44
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END
Pict.
SCR-ADJ PRJ Net. Help
Resize
Image Shift 0 0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language Front
English On Logo
On
Auto Keystone On Border
87654 3
21
1
1 1
1
1
Setting the Resize Mode
•For details of the Resize mode, see pages
31 and  32.
•Y ou can also press  RESIZE on the remote con-
trol to set the resize mode. (See page  31.)
Note
2
2 2
2
2
Adjusting the Image
Position
You can move the projected image vertically.
Q button
•This function only works in some RESIZE
modes. (See pages  31 and  32.)
Note
O button Menu operation 
n Page  39
3
3 3
3
3
Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
For Auto Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “On”.
For Manual Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “Off”, select “Keystone”, and
then adjust with the slide bar.
• The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees
(when “Resize” is set to “Normal”).
•Y ou can also press  KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
Note
Manual Correction
See page  29 for details of Keystone Correction. O
 button
Q  button 
						

							45
Useful
Features
The projector can switch the on-screen display
language among 15 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear Description
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
6
6 6
6
6
Selecting the Setup
Guide
8
8 8
8
8Selecting the On-screen
Display Language
Selectable items
On
Off Description
Displaying the Setup Guide
when turning the projector on.
Not displaying the Setup
Guide.
7
7 7
7
7
Reversing/Inverting
Projected Images
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
polski
Türkçe
4
4 4
4
4
Setting the On-screen
Display
Menu operation  n Page  39
Selectable
items
On
Off Description
All on-screen displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
ECO+QUIET/MAGNIFY/ “An invalid
button has been pressed.” are not
displayed.
5
5 5
5
5Selecting the Background
Image
Selectable items
Logo
Blue
None Description
Sharp logo screen
Blue screen
—
See page  19 for details of Projection (PRJ) Mode. 
						

							46
Adjusting the Projector Function (“PRJ - ADJ” Menu)
SEL./ADJ. ENTER END
Pict. SCR
PRJ-ADJNet. Help
Auto Power Off
System Sound
System Lock hOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100%
Speaker On
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable
Auto Sync On
1
2
3
4
5
6
7
8
9
0
Menu operation 
n Page  39
•When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Selectable
items
On
Off Description
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
Note
2
2 2
2
2A uto Power Off Function
6
6 6
6
6
Speaker Setting
5
5 5
5
5Setting the Confirmation
Sound (System Sound)
Selectable
items
On
Off Description
A confirmation sound is made when
the projector turns on/off.
No confirmation sound is made.
When set to “Eco”, power consumption is
reduced in standby mode.
4
4 4
4
4
STANDBY Mode
Selectable
items
On
Off Description
The audio signal is output from the
internal speaker.
The audio signal is not output from the
internal speaker.
Selectable items
Eco
Standard Description
The monitor output, RS-232C and
Network functions are switched off in
standby mode.
The monitor output, RS-232C
 and
Network functions are activated even if
the projector is in standby mode.
• Auto Sync adjustment is also performed by
pressing  AUTO SYNC  on the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page  51.)
Selectable
items
On
Off Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
Note
1
1 1
1
1A uto Sync (Auto Sync
Adjustment)
3
3 3
3
3
Auto Restart Function
Selectable
items
On
Off Description
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.