Sharp Xg F315x Projector User Manual
Here you can view all the pages of manual Sharp Xg F315x Projector User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
27 Basic Operation About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Image Projection Setup Guide screen • The Setup Guide screen automatically high- lights the items in the following order: 1 FOCUS 3 ZOOM 4 ENTER 2 HEIGHT ADJUST However, you can adjust the focus, height (angle), or zoom regardless of the highlighted item. • If you do not want...
Page 32
28 Image Projection (Continued) 3 Adjusting the Height The height of the projector can be ad- justed using the adjustment feet at the front and rear of the projector. When the screen is above the projec- tor, the projection image can be made higher by adjusting the projector. 1 2 3 •Do not apply too much pressure on the pro- jector when the front adjustment foot comes out. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector....
Page 33
29 Basic Operation 0 KEYSTONEADJUST END Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. • The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees (when the resize mode is set to “NORMAL” (see page...
Page 34
30 Image Projection (Continued) Displaying the Black Screen and Turning off the Sound Temporarily Adjusting the Volume Switching the Input Mode Press COMPUTER , DVI , S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. Select the appropriate input mode for the connected equipment. Press VOL +/– on the remote control or – O /Q + on the projector to adjust...
Page 35
31 Basic Operation Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose a desired image. Press RESIZE .•See page 44 for setting on menu screen.RESIZE button COMPUTER STRETCH For 4:3 screen For 16:9 screen Input signal Image type NORMAL FULL BORDER 4:3 aspect ratio 5:4 aspect ratio 16:10 aspect ratio 16:9 aspect ratio : Cutout area on which images cannot be projected : Area where the signals are off...
Page 36
32 VIDEOVIDEO/DTV ** ** * * * * 4:3 aspect ratio Squeeze Letter box 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9) For 4:3 screen For 16:9 screen Input signal Image type NORMAL Video/DTV 480 I, 480P, 576 I, 576P, NTSC, PAL, SECAM 720P, 1035 I, 1080 I, 1080P 540P : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals *The Image Shift function can be used for these images. BORDER STRETCH AREA ZOOM V -STRETCH Image Projection...
Page 37
33 Useful Features Operating with the Remote Control Displaying and Setting the Break Timer Press BREAK TIMER .•The timer starts to count down from 5 minutes.1 2 Press P/R /O /Q to adjust the length of the break time. • Increases with P or Q 5 minutes s 6 minutes s 60 minutes•Shortens with O or R4 minutes s 3 minutes s1 minute • The break time can be set in units of one minute (up to 60 minutes). On-screen display Canceling the break timer display function Press BREAK TIMER . •Break Timer...
Page 38
34 Operating with the Remote Control (Continued) Press MAGNIFY on the remote control. • Enlarges the image. •P ressing or MAGNIFY enlarges or reduces the projected image. Note 1 2 3 4 Press . Press. •Y ou can change the location of the en- larged image using P, R , O and Q. Press RETURN on the remote con- trol to cancel the operation. • The magnification then returns to ×1. Note • The selectable magnifications differ depending on the input signal. • In the following cases, the image will...
Page 39
35 Useful Features Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse. If the computer is placed too far away from the projector to be connected via the USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate the projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable or Remote receiver (optional,...
Page 40
36 The following shows the items that can be set in the projector. Menu Items Picture ModeContrast 0 0 0 0 BrightColorTint0 Sharp Standard SEL./ADJ. ENTER END Picture SCR PRJ Net. Help 0 0 Red Blue Picture Mode CLR Temp BrilliantColor TMC.M.S. Setting C.M.S. Standard SEL./ADJ. ENTER END Picture SCR PRJ Net. Help Progressive Lamp Setting 0 1 On 3D Progressive Bright Reset PA GE 2 Main menu Sub menuPicture Page 41Page 41 Page 42 Page 42 Page 42 Page 42 Page 42 Page 43 Page 43 +30 -30Contrast +30...