Sharp Xg E690ub Projector User Manual

XG-E690UB (E)/pp. 01-04G. K. Associates, Tokyo
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREW.
CAUTION
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. 
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
E-1
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted...

E-2
Important Safeguards
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved
by the manufacturer could void the user’s authority to operate this equipment.
U.S.A. ONLY
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a...

XG-E690UB (E)/pp. 01-04 G. K. Associates, Tokyo
E-3 15) Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
16) Object and Liquid Entry — Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
17) Servicing — Do not attempt to service this...

Remote control signal receiver window
Focusing ring
Cooling fan (exhaust vent)
Carrying handle
E-4
Location of Controls
FRONT VIEW
OUT INL
AUDIO VIDEO AUDIO VIDEO
S-VIDEO
R RLCOMPUTER
INPUT OUTPUTCOMPUTER
RGBOFF ONFILTER
FILTER ON/OFF switch
COMPUTER RGB INPUT
connector (HD-15)
COMPUTER RGB OUTPUT
connector (HD-15)
MAIN POWER button KEYSTONE/SIZE
CORRECTION knob
S-VIDEO INPUT
(4-pin mini DIN)VIDEO INPUT
Video: RCA
Audio: RCAVIDEO OUTPUT
Video: RCA
Audio: RCA COMPUTER
AUDIO INPUT
(Stereo mini jack)Cooling...

XG-E690UB (E)/pp. 05-08 G. K. Associates, Tokyo
E-5
Remote Control Operation
Inserting the batteries
Remove the battery cover as shown and insert two AAA size batteries making sure the
polarity matches the (+) and (–) marks inside the battery compartment.
Notes:
Incorrect use of batteries may cause them to leak or burst.
• Insert the batteries with the (+) and (–) polarities as indicated.
• Remove the batteries if the remote control will not be operated for an extended period
of time.
• Maintain the...

90°
Lower edge of screen (white portion)
Distance between lens and screen: L
Lens Center
L: 9.8 ft (3.0 m)
Distance from screen
Picture size: 100 inches (254 cm)
Projector Distance and Picture Size Relationship
• This projector has a fixed-focus lens.
Refer to the diagram below to determine the picture size and projection distance.
• The picture can be focused when the projector is within 4.3 ft to 14.4 ft of the
screen. Please set up the projector within this range.
• Above is an illustration of...

XG-E690UB (E)/pp. 05-08 G. K. Associates, Tokyo
90°
Lens center
SIDE VIEW
90°
Lens center
Example of a standard setup
TOP VIEWThe projector
lens should be
centered in the
middle of the
screen.If the projector
and screen are
not centered
properly, the
picture will be
distorted, making
viewing difficult.
Using the reverse function makes the following setups possible.
Using the Focus, Keystone and Size Correction Functions
• Focus, Keystone and Reversed Image mode functions broaden your options for...

XG-E690UB (E)/pp. 05-08 G. K. Associates, Tokyo
E-8
Adjusting the Height of the Picture
• Use the adjuster release to adjust the angle of
the projector and height of the picture. Minor
adjustments can be made with the adjusters.
1. Press the adjuster release and lift the
projector to the desired angle with both
hands.
• The adjuster legs will extend to the surface of the table.
2. Remove your hand from the adjuster
release.
• The adjuster legs will lock in position. Release the projector
once you are...

Connecting the Projector
E-9
To watch video playback with the projector
connected to audio/video output equipment, such
as a VCR or Laser Disc Player, or to view on a
separate monitor:
• Always turn off the LCD Projector while
connecting to video equipment, in order to
protect both the projector and the
equipment being connected.
Note the following when using the S-VIDEO INPUT terminal:
• The S-VIDEO INPUT terminal uses a video signal system in
which the picture is separated into a color and a luminance...

XG-E690UB (E)/pp. 09-10 G. K. Associates, Tokyo
E-10 You can connect your projector to a computer for easy
projection of full-color computer images, or an external
monitor for simultaneous viewing.
Before connecting, be sure to turn both the projector and the
computer off.
After making all connections, turn the projector on first. The
computer should always be turned on last.
1. Connecting to an IBM-PC (VGA, SVGA)
Series computer—800 x 600 maximum
resolution
Plug the VGA signal cable correctly into the...