Sharp Xg C50x Projector User Manual

LCD PROJECTOR
MODEL
XG-C50X
OPERATION MANUAL
Introduction
Connections and Setup
Basic Operation
Easy to Use Functions
Appendix 

IMPORTANT
For your assistance in reporting the loss or theft of your
Projector, please record the Serial Number located on
the bottom of the projector and retain this information.
Before recycling the packaging, please be sure that
you have checked the contents of the carton thoroughly
against the list of “Supplied accessories” on page 14.Model No.: XG-C50X
Serial No.:
The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian,
Dutch, Portuguese, Chinese...

Introduction
-1
Before using the projector, please read this operation manual carefully.
There are two important reasons for prompt warranty registration of your new SHARP Projector, using
the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification,...

-2
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote
control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution Concerning the Lamp...

Introduction
-3
Outstanding Features
1. Ultra High Brightness from a Compact Projector
•AC 250W Lamp
Use AC 250W lamp for excellent color uniformity and ultra high brightness.
•Power Save mode function enables lower noise levels, reduced power
consumption and longer lamp life.
2. Simple & Easy Operation
•User friendly interface with easy to use operation system and connection
areas makes setup a breeze.
Smooth installation and operation using frequently used buttons,
placement of terminals, color schemes...

-4
Contents
Adjusting the Picture ........................................ 46
Adjusting Image Preferences .................................. 46
Selecting the Signal Type ....................................... 46
Progressive Mode .................................................... 47
Adjusting Computer Images ............................ 48
When Auto Sync is OFF ........................................... 48
Saving Adjustment Settings ..................................... 48
Selecting Adjustment...

Introduction
-5
Canceling the Keylock Setting ................................ 72
Selecting the Transmission Speed
(RS-232C) ..................................................... 72
Setting up a Password ...................................... 73
Entering the Password ............................................. 73
Changing the Password ......................................... 74
If You Forget Your Password ................................... 74
Setting the Anti-Theft...

-61. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain InstructionsThe safety and operating instructions should be
retained for future reference.
3. Heed WarningsAll warnings on the product and in the operating
instructions should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners....

Introduction
-7 18. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an...

-8
IMPORTANT SAFEGUARDS
Be sure to read the following safeguards when setting up
your projector.
Caution concerning the lamp unit
■Potential hazard of glass particles if
lamp ruptures. In case of lamp rupture,
contact your nearest Sharp Authorized
Projector Dealer or Service Center for
a replacement.
See “Replacing the Lamp” on page 85.
Cautions concerning the setup of the projector
■For minimal servicing and to maintain high image qual-
ity, SHARP recommends that this projector be installed
in an area...