Sharp Xg C465x Projector User Manual

-39
Basic Operation
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can\
 use the remote control as the
computer mouse.
If the computer is placed too far away from the projector to be connecte\
d via the USB cable, the separately
sold remote receiver (AN-MR2) makes it possible to operate the project\
or with the remote control.  For de-
tails, see the operation manual of the receiver.
Connecting with a USB cable
The mouse...

-40
Menu Items
The following shows the items that can be set in the projector.
Note
•“Fine Sync” menu is only displayed when the projector input is COM\
PUTER/COMPONENT 1, 2 or DVI-D.
“Picture” menu
“Fine Sync” menu
COMPUTER/COMPONENT 1 (RGB),
COMPUTER/COMPONENT 2 (RGB), DVI-D
Picture
Picture Mode
Contrast
Bright
Red
Blue
CLR Temp
Reset
Signal TypeCOMP.1
Standard
7500K
A uto
SEL./ADJ.
RETURN ENTER
END0
0
0
0
COMPUTER/COMPONENT 1 (Component),
COMPUTER/COMPONENT 2 (Component),
VIDEO, S-VIDEO
Picture...

-41
Useful Features
“Options1” menu
“Language” menu
“Options2” menu
Options1
Lamp Timer (Life)
Resize
Image Shift
Keystone
A uto Keystone
OSD Display
Background
Eco+Quiet Mode
A uto Power Off
System Sound
Menu Position
System Lock
A uto Restart
h ( 100%)
VIDEO
Normal
On
On
Logo
On
On
On
Center
Disable
On
SEL./ADJ.
RETURN ENTER
END0
0
0
LanguageCOMP.1
SEL./ADJ.
RETURN ENTER
END
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Options2
P
assword
Speaker
A udio Out
PRJ Mode
F an Mode...

-42
Picture
Picture Mode
Contrast
Bright
Red
Blue
CLR TempReset
Signal TypeCOMP.1
Standard
7500K
A uto
SEL./ADJ.
RETURN ENTER
END0
0
0
0
Using the Menu Screen
Menu Selections
Example: Adjusting “Bright”
•
This operation can also be performed by using the buttons on the projector.
Menu icons
MENU button
MOUSE/Adjustment 
b
uttons ( '/" /\ /| )
RETURN buttonENTER
button
Adjustment 
buttons ('/" /\ /| )
MENU button ENTER button
RETURN button
Example: “Picture” screen menu for...

-43
Useful Features
Picture
Picture Mode
Contrast
Bright
Red
Blue
CLR TempReset
Signal TypeCOMP.1
Standard
7500K
A uto
SEL./ADJ.
RETURN ENTER
END0
0
0
0
3Press 
'
' '
'
'  or 
"
" "
"
"  to select the item
y ou want to adjust.
• The selected item is highlighted.
To adjust the pro-
jected image while
viewing it
Press ENTER.
•The selected single adjustment item
(e.g. “Bright”) appears instead of the
menu.
• When pressing 
'
' '
'
'  or 
"...

-44
Picture
Picture Mode
Contrast
Bright
Red
Blue
CLR Temp 
Reset
Signal Type
Dynamic Range DVI
Standard
7500K
D.  PC RGB
Standard
SEL./ADJ .
RETURN ENTER
END
0
0
0
0
Menu operation  
Page  42
1
2
3
4
5
1
1 1
1
1Selecting the Picture Mode
This function allows you to select the picture
mode in accordance with brightness of the room
or content of the image to be projected.
In all picture modes, items on the “Picture” menu
can be adjusted and saved.
Picture Adjustment (“Picture” menu)
Note
• You can also...

-45
Useful Features
Menu operation  Page  42
Note
•The Video signal can only be set in VIDEO or
S-VIDEO mode.
• When “Video System” is set to “Auto”, you may
not receive a clear picture due to signal differ-
ences. Should this occur, switch to the video
system of the source signal.
*When reproducing NTSC signals in PAL video
equipment.
Selectable items
A uto
PA LSECAM
*NTSC4.43
NTSC3.58PAL-M
PAL-N
P AL -60
7
7 7
7
7
Setting the Video System
The video input system mode is factory preset
to “Auto”;...

-46
Fine Sync
Clock
Phase
H-Pos
V- Po sReset
Resolution
A uto Sync
Signal InfoCOMP.1
640  × 480
On
SEL./ADJ.
RETURN ENTER
END
0
0
0
0
Computer Image Adjustment (“Fine Sync” menu)
Menu operation  
Page  42
1
2
3
1
1 1
1
1Adjusting the Computer Image
If the optimum image cannot be obtained with Auto
Sync adjustment, use the Fine Sync function. 4
Note
•
To  reset all adjustment items, select “Reset” and
press 
ENTER.
• The adjustable range of “V-Pos” (V-Position) may
va ry depending on the screen resolution...

-47
Useful Features
Options1
Lamp Timer (Life)
Resize
Image Shift
Keystone
A uto Keystone
OSD Display
Background
Eco+Quiet Mode
A uto Power Off
System Sound
Menu Position
System Lock
A uto Restart
h ( 100%)
VIDEO
Normal
On
On
Logo
On
On
On
Center
Disable
On
SEL./ADJ.
RETURN ENTER
END0
0
0
Using the “Options1” Menu
Menu operation   Page  42
1
2
3
4
5
6
7
8
9
0
q
w
1
1 1
1
1
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Lamp usage...

-48
Using the “Options1” Menu
Menu operation  Page  42
4
4 4
4
4
Keystone Correction
When the image is projected either from the top or from
the bottom towards the screen at an angle, the image be-
comes distorted trapezoidally. The function for correct-
ing trapezoidal distortion is called Keystone Correction.
Auto Keystone Correction
Set “Auto Keystone” on the “Options1” screen menu
to “On”.
Manual Keystone Correction
Set “Auto Keystone” on the “Options1” screen menu to
“Off”, and select “Keystone”,...