Sharp Xg C435x L Projector User Manual

-29
Connections
Audio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment.
Note
• Tu rn off the power of both the projector and audio equipment when connecting.
• When turning off the power in the case of connecting an amplifier or other audio equipment, firs\
t turn off
the power of the amplifier and then turn off the power of the projector.
• By using external audio components, the volume can be amplified for better sound.
• For details...

-30
AC socketTo AC outlet
Turning the Projector On/Off
Info
• When “Auto Restart” is set to “On”:If the power cord is unplugged from the outlet or the
breaker switch is turned off when the projector is on, then
the projector automatically turns on when the power cord
is plugged into the AC outlet or the breaker switch is turned
on. (See page  51.)
•English is the factory preset language. If you want to
change the on-screen display to another language, change
the language according to the procedure on...

-31
Basic Operation
Image Projection
Height Adjustment button
Side View
Lens 
center
Top View
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet when the screen is
located higher than the projector, the screen
is inclined or when the installation site is
slightly inclined.
Install the projector so that it is as perpen-
dicular to the screen as possible.
1Press the H eight Adjustment but-
tons.
• The adjustment feet come out.
2Lift the projector to adjust its...

-32
Image Projection
ENDTESTPATTERN ADJUST
RESET
H&V KEYSTONE                    H: 0         V: 0
"
On-screen Display (Keystone Correction mode)
KEYSTONE
button
MOUSE/Adjustment 
buttons ('/"/\/|)
RETURN button
Note
• Press  RETURN  to return to the default set-
ting.
• Straight lines or the edges of images may
appear jagged while adjusting the image.
•
The Manual Keystone Correction can be
adjusted up to an angle of approximately
±50 degrees vertically and approximately
±30 degrees...

-33
Basic Operation
Adjusting the Lens
The image is focused and adjusted to the screen
size using the focus ring or zoom knob on the
projector.
1The focus is adjusted by rotat-
ing the focus ring.
2Zooming is adjusted by moving
the zoom knob.
Focus ring Zoom knob
Zoom in
Zoom out 

-34
Image Projection
COMPUTER 1,
COMPUTER 2,
DVI, S-VIDEO,
VIDEO buttons
VOL +/–
(Volume)
buttons
AV  MUTE
button
Switching the Input Mode
Select the appropriate input mode for the con-
nected equipment.
Press  COMPUTER1/2 , DVI , S-VIDEO
or  VIDEO  on the remote control to se-
lect the input mode.
• When you press  INPUT on the projector or  DVI
on the remote control, the INPUT list appears.
Press  '' ''
' /
""
""
"  to switch the INPUT mode.
Adjusting the Volume...

-35
Basic Operation
Displaying and Setting the
Break Timer
1Press BREAK TIMER .
•The timer starts to count down from 5 min-
utes.
On-screen display
2Press  '/" /\ /|  to adjust the length
of the break time.
• Increases with  ' or  |
5 minutes  s 6 minutes  s 60 minutes
• Shortens with \  or "
4 minutes  s 3 minutes  s 1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
Press  BREAK TIMER .
Note
•Break Timer does not function while the projec-
tor is operating...

-36
Selecting the Picture Mode
You can select the appropriate picture mode for
the projected image, such as movie or video
game.
Press  PICTURE MODE .
•When pressing  PICTURE MODE , the picture mode
changes in the following order:
STANDARD PRESENTATION MOVIE GAME sRGB
Note
•See page  45 for details on the picture mode.
*“sRGB” is displayed only when RGB signal is input.
Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of projected
images can be enlarged. This is helpful when...

-37
Basic Operation
Resize Mode
This function allows you to modify or customize
the resize mode to enhance the input image. De-
pending on the input signal, you can choose a
desired image.
Press RESIZE .
•See page  49 for setting on menu screen.
RESIZE button
COMPUTER
STRETCH
For 4:3 screen For 16:9 screen
Input signal
Image type
NORMALFULL BORDER
4:3 aspect ratio
5:4 aspect ratio
16:10 aspect ratio 16:9 aspect ratio
Computer
Resolution
lower than XGA
XGA
Resolution
higher than XGA
SXGA (1280 
 1024)...

-38
VIDEO/DTV
Image Projection
About Copyrights
•When using the RESIZE function to select an image size with a different aspect ratio to a TV program or
video image, the image will look different from its original appearance. Keep this in mind while choosing an
image size.
• The use of the Resize or Keystone Correction function to compress or str\
etch the image for commercial
purposes/public displays in a café, hotel, etc. may be an infringemen\
t of copyright protected by law for
copyright holders....