Sharp Xg C335x Projector User Manual

-29
Connections
Amplifier
To AUDIO output terminal 
(MONITOR OUT)
To audio input terminal
ø3.5 mm minijack to 
RCA audio cable
(commercially available)
Audio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment.
Note
•Turn off the power of both the projector and audio equipment when connecting.
•When turning off the power in the case of connecting an amplifier or other audio equipment, first turn off
the power of the amplifier and then turn...

-30
AC socketTo AC outlet
Turning the Projector On/Off
Info
• If “Direct Power On” is set to “Enable”, the projector
will be turned on automatically when you plug the
power cord into the AC outlet. (See page  50.)
• English is the factory preset language. If you want to
change the on-screen display to another language,
change the language according to the procedure on
page  54.
▼On-screen Display
Info
•You can unplug the power cord even if the projector is
operating.
•Even if you unplug the power cord...

-31
Basic Operation
Image Projection
Height Adjustment button
Side View
Lens 
center
Top View
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet when the screen is
located higher than the projector, the screen
is inclined or when the installation site is
slightly inclined.
Install the projector so that it is as perpen-
dicular to the screen as possible.
1Press the H eight Adjustment but-
tons.
• The adjustment feet come out.
2Lift the projector to adjust its...

-32
Image Projection
"On-screen Display (Keystone Correction mode)
KEYSTONE
button
MOUSE/Adjustment 
buttons ('/"/\/|)
RETURN button
Compresses
lower side.
Compresses
upper side.
Note
•The Manual Keystone Correction can be ad-
justed up to an angle of approximately ±40
degrees and the screen can also be set up
to an angle of approximately ±40 degrees
(when the resize mode is set to “Normal”
(see page 47)).
Correcting Trapezoidal
Distortion
Auto Keystone Correction
When the image is projected...

-33
Basic Operation
Adjusting the Lens
The image is focused and adjusted to the screen
size using the focus ring or zoom knob on the
projector.
1The focus is adjusted by rotat-
ing the focus ring.
2Zooming is adjusted by moving
the zoom knob.
Focus ring Zoom knob
Zoom in
Zoom out 

-34
Image Projection
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
On the remote control
Press  ,  ,  ,  or  on the
remote control to select the input mode.
On the projector
1 11 1
1Press an INPUT (
' '' '
'/
" "" "
") button.
•The INPUT list appears.
2 22 2
2Press 
' '' '
'/
" "" "
" to select an item on
the list.
3 33 3
3Press 
ENTER.
Note
•When no signal is received, “NO SIGNAL”...

-35
Basic Operation
Adjusting the Volume
Press / VO L on the projector or  /  VOL
on the remote control to adjust the volume.
Note
• Pressing  or  V OL will lower the volume.
Pressing 
  or  V OL will raise the volume.
Displaying the Black
Screen and Turning Off the
Sound Temporarily
Press AV  MUTE on the remote control to tem-
porarily display a black screen and turn off the
sound.
Note
• Pressing AV  MUTE  again will turn the pro-
jected image and sound back on.
Displaying an Enlarged
Portion of an...

-36
Displaying and Setting the
Break Timer
This function allows you to show the remaining
time for break during meeting.
1Press BREAK TIMER. The break
timer starts to count down from 5
minutes.
2When “” is displayed, press 
' '' '
' ,
" "" "
" , 
\ \\ \
\ or 
| || |
| to set the break timer.
•You can set anywhere between 1 and 60
minutes (in 1 minute units).
3Press BREAK TIMER to cancel
the break timer.
MOUSE/Adjustment 
buttons ('/"/\/|)
      PICTURE MODE...

-37
Basic Operation
Resize Mode
This function allows you to modify or customize
the resize mode to enhance the input image. De-
pending on the input signal, you can choose a
desired image.
COMPUTER
STRETCH
For 4:3 screen For 16:9 screen
Input signal
Image type
NORMAL FULL BORDER
4:3 aspect ratio
5:4 aspect ratio
16:10 aspect ratio 16:9 aspect ratio
: 
Cutout area on which images cannot be projected
:  Area where the signals are off screen
*The Image Shift function can be used for these images.
Computer...

-38
VIDEO
**
**
*
*
* *
4:3 aspect ratio
Squeeze
Letter box
16:9 aspect ratio 16:9 aspect ratio
(4:3 aspect ratio in 16:9)
For 4:3 screen For 16:9 screen
Input signal
Image type NORMAL
D VD / Video
480 I,  480P,
576 I,  576P,
NTSC, PAL, SECAM
720P, 1035 I,
1080 I
540P Select “Normal”.
: 
Cutout area on which images cannot be projected
:  Area on which the image is not included in the original signals
*The Image Shift function can be used for these images.
BORDER STRETCH
AREA ZOOM
V
-STRETCH
Image...