Sharp Projector XG-PH50X User Manual

Useful Features
-77
Selecting the Background
Image
Menu operation  Page 58
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of  Background Images
Note
• You can set a captured image as a background
image by selecting “Custom”.
• When “Custom” is selected, an image saved us-
ing “Image Capture” can be displayed as a back-
ground image.
Selectable items
Logo
Custom
Blue
None Description
Default image
User customized image (e.g. company logo)
Blue screen
Black screen
Selecting the...

-78
Using the “Options (1)” Menu
Eco Mode
Menu operation  Page 56
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of Eco Mode
* This is a reference value and is not guaranteed.
Note
• When “Eco Mode” is set to “ON”, the power con-
sumption will decrease and the lamp life will
extend. (Projection brightness decreases ap-
proximately 20%.)
Brightness
Approx.
80%
100%
Selectable items
ON
OFF
Power consumption
(When using AC 100V)
Approx. 505 W
630 W Lamp life
Approx.
3,000 hours*...

Useful Features
-79
Auto Power Off Function
Menu operation  Page 56
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of Auto Power Off
Note
•When “Auto Power Off ” is set to “ON”, 5 min-
utes before the projector enters the standby
mode, the message “Enter STANDBY mode in
X min.” will appear on the screen to indicate
the remaining minutes.
Description
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
The “Auto Power Off ”...

-80
Using the “Options (1)” Menu
Note
•If you input a wrong keycode, the cursor returns
to the first point of the “Old Code”.
• The preset keycode is 4  " buttons on the projec-
tor. If this keycode is set, the keycode input screen
does not appear when turning the power on.
3Press the 4 buttons on the remote
control or on the projector to enter
the new keycode in “New Code”.
Note
• You cannot use the following buttons for
keycode:
• ON button
• STANDBY button
• ENTER button
• L-click button
•...

Useful Features
-81
When the system lock is set
If you have set the system lock, enter the
keycode and follow the procedure below to
release the system lock.
    ▼Input screen for keycode
Note
•When System Lock is set, the keycode input
screen appears after the power is turned on.
• If no keycode is entered, the image will not be
displayed, even if the projector receives the in-
put signal.
1Press  on the remote control or
  on the projector to turn on the
projector.
2When the keycode input screen ap-...

-82
Helpful Functions Set during Installation (“Options (2)” menu)
Setting a Password
•
• •
•
•There is no factory preset for the password, so
the “Options (2)” menu is enabled.
•
• •
•
•If you do not want others to operate the “Op-
tions (2)” menu, set a password.
Menu operation  Page  58
Example: “Options (2)” screen menu
1Select “Password” from the “Op-
tions (2)” menu, and press 
|
| |
|
| .
2Press 
'
' '
'
'  or 
"
" "
"
"  to set the first digit in
“New...

Useful Features
-83
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation  Page  56
Example: “Options (2)” screen menu
Description of Lamp Timer (Life)
* This is a reference value and is not guaranteed.
Note
•It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The table  above indicates rough estimates in the
case of using only in each mode shown.
• The lamp life may vary depending on the...

-84
Reversing/Inverting Pro-
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation  Page 58
Example: “Options (2)” screen menu
Description of PRJ Modes
Note
•This function is used for the reversed image and
ceiling-mount setups. (See page  23.)
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Selectable items
Front
Ceiling + Front
Rear
Ceiling +...

Useful Features
-85
Shortcut to Make Projector
Stack Settings
Normally, settings via web browser are required for
the stack projection. You can skip the settings via
web browser by using “Pair Stack”, only when you
use the two projectors for the stack projection.
Menu operation  Page  56
Note
•Before setting “Pair Stack”, select “Master” or
“Slave” on “Stack Setting”.
Example: “Options (2)” screen menu
1Select “Pair Stack” on the “Option
(2)” menu, and then press 
 .
• The confirmation screen will be...

-86
Helpful Functions Set during Installation (“Options (2)” menu)\
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation  Page 58
Example: “Options (2)” screen menu
Description of RS-232C
Note
•Refer to the “SETUP GUIDE” contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Tr...