Sharp Projector Pg M20x User Manual

							Basic Operation
-37
2Press  or  to select the
menu you want to adjust.
Note
• For details on the menus, see the 
tree charts on pages  34  and  35 .
3Press  or  to select the
item you want to adjust.
Note
• To display a single adjustment item, 
press 
 after selecting the item.
Only the menu bar and the selected 
adjustment item will be displayed. 
Then if you press 
 or , the fol-
lowing item ( “Phase ” is after  “Clock ”)
will be displayed.
• Press 
 to return to the previous
screen.
4Press  or  to adjust the
item selected.
• When you release  or  the
adjustement is stored.
5Press .
• The on-screen display is cleared.
|| 
||
| 
						

							MENU button
 buttons
ENTER button MENU button
 buttons
ENTER button

  On-screen Display
Basic Operations 
(Settings)
1Press .
Note
•The  “Picture ” menu screen for the
selected input mode is displayed.
• The on-screen display shown on the 
right is displayed when the INPUT 1 
mode is selected.
2Press  or  to select the
menu you want to adjust.
Note
• For details on the menus, see the 
tree charts on pages  34  and  35.
3Press  or  to select the
item you want to set.
Note
• Press  to return to the previous
screen.
• In some menus, sel ect the icon us-
ing  “
”.
Using the Menu Screen (cont.)
Sub menu
-38 
						

							Basic Operation
-39
4Press .
•The cursor shifts to the sub menu.
5Press  or  to select the
setting of the item displayed in
the sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press 
 or
 to select “Ye s” or “OK” and then
press 
.
7Press .
•The menu will disappear.
Sub menu 
						

							Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Selected Item Description button button
Contrast 
Bright 
Color 
Tint 
Sharp 
Red 
Blue 
CLR Temp For adjusting the contrast level
For adjusting the brightness of an image 
For adjusting the color intensity of the image 
For adjusting the tones of an image 
For making sharper or softer the contour of an image 
For adjusting the redness level 
For adjusting the blue level 
For adjusting the color temperature of an image For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness 
For weaker red 
For weaker blue
Decreases color 
temperature for warmer,
reddish, incandescent-
like images.
For more contrast 
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness 
For stronger red 
For stronger blue
Increases color 
temperature for cooler,
bluish, fluorescent-like
images.
Adjusting Image 
Preferences
Adjust the Picture menu
➝
For adjustments, see page  36.
Note
•“Color ”,  “Tint ” and  “Sharp ” are not dis-
played when selecting INPUT 1 and the 
“ Signal Type ” is  “RGB ” .
• The picture adjustments can be stored 
separately in each input mode.
• When the signal type in INPUT 1 has
been set to Component,  “Sharp ” can be
adjusted when 480 I, 480P, 720P or 1080 I
signals are entered.
• To reset all adjustment items, select  “Re-
set ” and press 
.
Selecting the Signal Type
This function allows you to select the input 
signal type RGB or Component for INPUT1.
Select “Signal Type” in the “Picture” 
menu ➝ For settings, see page  38.
Note
• RGB
Set when RGB signals are received.
•
 Component
Set when Component signals are received.
-40 
						

							Basic Operation
-41
Progressive Mode
This function allows you to select the pro- 
gressive display of a video signal. The pro- 
gressive display projects a smoother video
image.
Select “Progressive Mode ” in the  “Pic-
ture ” menu  ➝ For settings, see page  38.
Note
• 2D Progressive
This function is useful to display fast- 
moving images such as sports and ac- 
tion films. This mode optimizes the im- 
age in a displayed frame.
•
 3D Progressive
This function is useful to display relatively 
slow-moving images such as drama and
documentary more clearly. 
This mode optimizes the image by esti- 
mating the movement of a number of pre-
ceding and succeeding frames.
•
 Film Mode
Reproduces the image of film source 
clearly. Displays the optimized image of 
film transformed with three-two pull down 
(NTSC and PAL60Hz) or two-two pull
down  (PAL50Hz and SECAM) enhance- 
ment to progressive mode images. * The film source is a digital video record- ing with the original encoded as is at 24
frames/second. The projector can con- 
vert this film source to progressive video
at 60 frames/second with NTSC and 
PAL60Hz or at 50 frames/second with 
PAL50Hz and SECAM to play back a
high-definition image.
• When using progressive inputs, these
inputs are directly displayed therefore 2D 
Progressive, 3D Progressive and Film 
Mode cannot be selected. These modes
can be selected in interlace signals other 
than 1080
I.
• In NTSC or PAL60Hz, even if the 3D Pro- 
gressive mode has been set, the three- 
two pull down enhancement will be en- 
abled automatically, when the film source
has been entered.
• In PAL50Hz or SECAM, the two-two pull
down enhancement will be enabled only
in the Film Mode, when the film source 
has been entered. 
						

							Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical st\
ripes or flickering in 
portions of the screen.
When Auto Sync is OFF
When “Auto Sync ” is  “OFF ”, interference
such as flickering or vertical stripes may oc- 
cur if displaying tilings or vertical stripes. 
Should this occur, adjust  “Clock ”,  “Phase ”,
“ H-Pos ” and  “V- Po s ” for obtaining an opti-
mum image.
Select  “Clock ”, “ Phase ”, “ H-Pos ” or  “V-
Pos ” in the  “Fine Sync ” menu  ➝ For
adjustments, see page  36.
Note
•Computer image adjustments can be made 
easily by pressing 
. See page  44  for
details.
Saving Adjustment 
Settings
This projector allows you to store up to seven 
adjustment settings for use with various com- 
puters.
Select  “Save Setting ” in the  “Fine Sync ”
menu  ➝ For saving, see page  38.
Selected Item Description
Clock 
Phase 
H-Pos 
V- Po s Adjusts vertical noise. 
Adjusts horizontal noise (similar to tracking on your VCR). 
Centers the on-screen image by moving it to the left or right. 
Centers the on-screen image by moving it up or down.
-42 
						

							Basic Operation
-43
Selecting Adjustment Settings
Adjustment settings stored in the projector 
can be easily accessed.
Select “Select Setting ” in the  “Fine
Sync ” menu  ➝  For details, see page  38.
Note
•If a memory position has not been set, a 
resolution and frequency setting will not 
be displayed.
• When selecting a stored adjustment set- 
ting with  “Select Setting ”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected 
and the correct resolution mode is automati- 
cally selected. However, for some signals, the 
optimal resolution mode in  “Special Modes ” on
the  “Fine Sync ” menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting  “Special
Modes ” in the  “Fine Sync ” menu  ➝ For
details, see page  38.
Note
•Avoid displaying computer patterns which 
repeat every other line (horizontal stripes).
(Flickering may occur, making the image 
hard to see.)
• When a DVD player or Digital Video is 
connected, select 480P as the input sig- 
nal.
•
See  “Checking the Input Signal ” below for
information on the currently selected input
signal.
Checking the Input Signal
This function allows you to check the current 
input signal information.
Select  “Signal Info ” in the  “Fine Sync ”
menu  ➝ For confirmation, see page  36.
Note
•The projector will display the number of 
scanned lines available input from audio- 
visual equipment such as a DVD player 
or Digital Video. 
						

							Auto Sync Adjustment
Used to automatically adjust a computer im- 
age.
Select “Auto Sync ” in the  “Fine Sync ”
menu  ➝ For settings, see page  38.
Note
When setting to  “ Normal” or
“
 High Speed ”:
• Auto Sync adjustment will occur when the 
projector is turned on or when the inputs 
are switched, when connected to a com-
puter.
Manual adjustments should be per-
formed: 
• When the optimum image cannot be 
achieved with Auto Sync adjustment. See
page  42.
• Auto Sync adjustment may take some
time to complete, depending on the im-
age of the computer connected to the pro- 
jector.
• When setting  “Auto Sync ” to  “OFF ” or
“ High Speed ”, and if 
is pressed Auto
Sync will be executed in  “High Speed ”
mode. If the button is pressed again 
within one minute, Auto Sync will be ex- 
ecuted in  “Normal ” mode.
Auto Sync Display 
Function
Used to set the screen displayed during Auto 
Sync.
Select  “Auto Sync Disp ” in the  “Fine
Sync ” menu  ➝ For settings,  see page  3 6 .
Note
•.....The image set as a background
image  is projected.
•
..... The computer image being ad- 
justed is displayed.
Adjusting Computer Images (cont.)
AUTO SYNC button
Screen display during Auto Sync
-44 
						

							Easy to Use Functions
Easy to Use Functions 
						

							46
Selecting the Picture Display Mode
Switching the Picture 
Display Using Different 
Input Signals
1Press .
•Each time  is pressed, the display
changes as sh own on page  4 7 .
Note
• In the Dot by Dot Mode, images are dis- 
played in the original resolution, therefore 
they will not be enlarged.
• To return to the standard image, press 
while  “ RESIZE ” i s displ ayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the 
input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY
DOT”,  “BORDER”, “STRETCH” or “SMART STRETCH” image.
RESIZE
button
Screen display of the picture display mode
-46