Sharp Projector Pg M15s User Manual

							29
Operation
Using the GUI (Graphical User Interface) Menu Screens
Items on the INPUT 1 (COMPONENT) Mode
Menu Bar
Main menu Sub menu
Color
Tint
Sharp
Options Lamp Timer
Language English
PRJ Mode
Ceiling
Front
Ceiling
Rear Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear Contrast Picture
Bright
Red
Blue
Background
30 30

30 30

30 30

30 30
None Blue
CLR Temp
Reset
Low High
Keystone

127 127

30 30

30 30

7 0
AV Mute Disp.
OSD Display
Auto Power OffOFF ON
ON
OFF
Auto Source ON
OFF ON
OFF
Items on the INPUT 2 (S-VIDEO) or INPUT 3
(VIDEO) Mode Menu Bar
Main menu Sub menu
Color
Tint
Sharp
Options Lamp Timer
Language English
PRJ Mode
Ceiling
Front
Ceiling
Rear Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear Contrast Picture
Bright
Red
Blue
Background
30 30

30 30

30 30

30 30
None
NTSC 4.43 Blue
CLR Temp
Reset
Low High
Video System
PAL Auto
PAL-M
PAL-N
PAL (60 Hz) NTSC 3.58
SECAM Keystone

127 127
AV Mute Disp.
OSD Display
Auto Power OffOFF ON
ON
OFF
Auto Source ON
OFF ON
OFF
30 30

30 30

7 0
•“Tint” does not appear when receiving “PA L”, “SECAM”, “PAL-M”, “PAL-N“ or “PAL (60Hz)” in the INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO)
mode. 
						

							30
Operation
Selecting the On-screen Display Language
Projector
(GUI) On-screen DisplayEnglish is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
1Press MENU.
2Press ∂/ƒ to select “Language”, and then press
ENTER.
3Press ∂/ƒ to select the desired language.
4Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5To exit from the GUI, press MENU.
Selecting the Video Input System Mode (INPUT 2 or 3 only)
ProjectorThe video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “Video Systems”, and then
press ENTER.
4Press ∂/ƒ to select the desired video system
mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•When the system mode is set to “Auto”, you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
(GUI) On-screen Display
2, 32, 41, 5
Remote control
2,3,42,3,51,6
Remote control
EnglishPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTEREspañol Deutsch
Nederlands
Français
Italiano
Svenska
Português
Picture
Options
Language
PRJ Mode
END SELECT BACK ENTERLamp Timer
Keystone
AV Mute Disp.
OSD Display
Auto Power Off
Background
Video SystemBlue
Auto ON
ON
ON
Auto Source ON100
0 
						

							31
Operation
ContrastPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTERBright
Red
Blue
CLR Temp
Reset0
0
0
0
High
ContrastPicture
Options
Language
PRJ Mode
END SELECT BACK ENTERBright
Color
Tint
Sharp
Red
Blue
CLR Temp0
0
0
0
0
0
0
High
Reset
Picture Adjustments
Projector
(GUI) On-screen Display
INPUT 1 (RGB) Mode
INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) Mode
2,3,42,31,5
Remote control
ContrastPicture
Options
Language
PRJ Mode
END SELECT BACK ENTERBright
Color
Tint
Sharp
Red
Blue
CLR Temp0
0
0
0
0
0
0
High
Reset
INPUT 1 (COMPONENT) Mode
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
All image adjustment items are returned to the factory preset
settings.
Description of Adjustment Items
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue Selected itemFor more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
ƒ button
∂ button
Contrast
Bright
Color
Tint
Sharp
Red
Blue
Reset
•These adjustments do not work in INPUT 1 (DVI) mode.
•“Color”, “Tint” and “Sharp” do not appear in INPUT 1 (DVI)
or (RGB) mode.
1Press MENU.
2Press ∂/ƒ to select “Picture”, and then press
ENTER.
3Press ∂/ƒ  to select a specific adjustment item,
and then press ENTER.
The items except the selected one will be
displayed in gray.
4Press ∂/ƒ to move the 
 mark of the selected
adjustment item to the desired setting.
5To exit from the GUI, press MENU.
•To reset all adjustment items, select “Reset”, and then press
ENTER. 
						

							32
Operation
ContrastPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTERBright
Red
Blue
CLR Temp
Reset0
0
0
0
High
Low
Picture Adjustments
Selecting the Color Temperature
(GUI) On-screen Display Projector
2,3,42,3,41,5
This function can be used to adjust the color
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the color temperature to create warmer,
reddish images for natural flesh tones. Increase the color
temperature to create cooler, bluish images for a brighter
picture.
Description of Color Temperature
Remote control
Increases color temperature for cooler, bluish,
florescent-like images. (High color temperature)
Decreases color temperature for warmer, reddish,
incandescent-like images. (Low color temperature)
Selected itemDescription
High
Low
1Press MENU.
2Press ∂/ƒ to select “Picture”, and then press
ENTER.
3Press ∂/ƒ to select “CLR Temp”, and then press
ENTER.
4Press ∂/ƒ to select “High” or “Low”, and then
press ENTER.
5To exit from the GUI, press MENU. 
						

							33
Operation
Computer Image Adjustments (INPUT 1 (RGB) mode only)
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
1Press AUTO SYNC.
During Auto Sync adjustment, “Adjusting The Image”
is displayed as shown on the left.
•Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
•When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See the steps
below.)
Projector
On-screen Display
1
ClockPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTERPhase
H-Pos
V-Pos
Signal Info0
0
0
0
Adjusting the Computer Image
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur, causing flickering, vertical stripes, or contrast
irregularities in portions of the screen. Should this occur,
adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the
optimum computer image.
•Computer image adjustments can be made easily by
pressing AUTO SYNC (). See the step above for details.
(GUI) On-screen Display Projector
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.Clock
Phase
H-Pos
V-Pos
Description of Adjustment Items
(Select the desired computer input mode with INPUT.)
1Press MENU.
2Press ∂/ƒ to select “Fine Sync”, and then press
ENTER.
3Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
4Press ∂/ƒ to move the 
 mark of the selected
adjustment item to the desired setting.
5To exit from the GUI, press MENU.
Description Selected item
Remote control
2,3,42,31,5
Remote control 
						

							34
Useful Features
Useful Features
Freeze Function
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
1Press FREEZE on the remote control to freeze
the image.
2Press FREEZE again to return to the moving
image.Remote control
1, 2
• If the input signal is changed by pressing INPUT during
FREEZE, the function releases.
On-screen Display  
						

							35
Useful Features
Digital Image Magnification
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
1Press ENLARGE on the remote control. Each time
ENLARGE is pressed, the image will be
magnified.
2When the image is magnified, you can pan and
scan around the image by using ∂/ß/ƒ/©.
3To return to 
 1, press BACK (on the remote
control only).
•Each time ENLARGE is pressed, image magnification
toggles as shown below.
149163664
•If the input signal is changed during digital image
magnification, the image will return to 
1. The input signal
is changed
(a) when INPUT is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
Remote control
s
On-screen Display
3 1 2 
						

							36
Useful Features
1
Selecting the Picture Display Mode
Remote controlThis function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose the
picture display mode preferred.
1Press RESIZE on the remote control. Each time
RESIZE is pressed, the picture mode changes
as shown below.
COMPUTER
EXAMPLE
SVGA (800 
 600)
 XGA (1024 
 768)
SXGA (1280 
 1024)1024 
 768
1024 
 768
1024 
 768800 
 600
 –  
1280 
1024
PG-M15X
NORMAL DOT BY DOT
4:3 aspect ratio
Other aspect ratios
PG-M15S
SVGA (800 
 600)
 XGA (1024 
 768)
SXGA (1280 
 1024)800 
 600
800 
 600
800 
 600–
1024 
 768  
1280 
 1024
NORMAL DOT BY DOT
4:3 aspect ratio
Other aspect ratios
VGA,
SVGA
(PG-M15X)
VGA
(PG-M15S)
XGA
(PG-M15S)XGA
(PG-M15X)
SVGA
(PG-M15S)
SXGA
(PG-M15X)
SXGA
(PG-M15S)
Output screen image
Input SignalNORMALDOT BY DOT
RESIZENORMAL
NORMALRESIZE
NORMALRESIZE
RESIZEDOT BY DOT
RESIZEDOT BY DOT
RESIZENORMALRESIZEDOT BY DOT
PG-M15X
•When inputting an XGA (1024
768) signal, the image display is set in NORMAL mode, and
DOT BY DOT selection is not available.
PG-M15S
•When inputting an SVGA (800
600) signal, the image display is set in NORMAL mode, and
DOT BY DOT selection is not available.
Projects a full screen image.
Projects the original resolution
signal of the image. 
						

							37
Useful Features
Selecting the Picture Display Mode
DVD/VIDEO
EXAMPLE
4:3 1024 
 768
1024 
 768
1024 
 7681024 
 576
1024 
 576
1024 
 576768 
 576
768 
 576
768 
 576
PG-M15X
NORMAL BORDERSTRETCH
4:3 aspect ratio
480I, NTSC,
PAL, SECAM
Squeeze Letterbox
PG-M15S
4:3800 
 600
800 
 600
800 
 600800 
 450
800 
 450
800 
 450600 
 450
600 
 450
600 
 450
NORMAL BORDERSTRETCH
4:3 aspect ratio
480I, NTSC,
PAL, SECAMLetterbox
Squeeze
•Letterbox: The 4:3 pixel area where the image is recorded. The black bands at the top
and bottom are unused pixels.
•Squeeze: Compresses an enhanced image (e.g. 16:9) to a 4:3 image display.
480I,
NTSC,
PAL,
SECAM
Output screen image
Input SignalNORMAL STRETCH BORDER
4:3 aspect ratio
Letterbox
Squeeze
RESIZENORMAL
RESIZENORMAL
RESIZENORMALRESIZESTRETCH
RESIZESTRETCH
RESIZESTRETCHRESIZEBORDER
RESIZEBORDER
RESIZEBORDER
Projects a full screen image.
Projects 16:9 image evenly
over entire screen (top/bottom
cut out).Projects 4:3 image fully (left/
right cut out) in stretched 16:9
image display (see left). 
						

							38
Useful Features
Gamma Correction
• Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.
• Three gamma settings are available to allow for
differences in the images displayed and in the
brightness of the room.
• When you are displaying images with frequent, dark
scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature makes
the dark scenes easier to see and gives the impres-
sion of greater depth in the image.
Gamma Modes
Remote control
On-screen Display
ss
STANDARD
GAMMA 1
GAMMA 2
1
1Press GAMMA on the remote control. Each time
GAMMA is pressed, the gamma level toggles as
shown on the left.
Gamma mode
Selected Mode
Standard picture without gamma correction.
Brightens darker portions of image for more
enhanced presentations.
Gives greater depth to darker portions of image
for a more exciting theater experience. STANDARD
GAMMA 1
GAMMA 2