Sharp Projector Pg M15s User Manual

Important
Information
9
Projector
Part Names
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Front and Top View
MENU button
ON/OFF button
POWER indicator
LAMP REPLACEMENT
indicator
TEMPERATURE WARNING
indicatorINPUT/BACK button
AUTO SYNC/ENTER button
KEYSTONE (/)/
SELECT/ADJUST (∂/ƒ) buttons
46
23
26
26
33
19
27
46
18
18
26
13
7
19
25
22
19
13
15
22
48
25
13
17
15
17
S-VIDEO INPUT 2 terminal
(4-pin Mini DIN)
DVI-DIGITAL/ANALOG
INPUT 1 port (29-pin)...

Important
Information
10
Front View
Part Names
Rear View
Remote Control
Mouse (∂/ƒ)/
Adjustment (∂/ƒ)
buttons
25
27
FREEZE button Mouse (ß) button
MOUSE button
INPUT button MENU button
KEYSTONE (/)
buttons
VOLUME buttonsPOWER button
RIGHT-CLICK/
ENTER button
ENLARGE button
AUTO SYNC button
RESIZE buttonLEFT-CLICK/
BACK button
AV MUTE button
GAMMA button
Flip coverMouse (©) button
Inserting the Batteries
13Press the tab and lift open
the battery cover in the
direction of the arrow.2Insert two AAA size...

Setup & Connections
11
Setup & Connections 

Setup & Connections
12
Supplied Accessories
Supplied Accessories
Remote control
9HJ7583104001
Two AAA size batteries
9HJ4683101001
USB mouse control cable
9HJ4283122001Computer RGB cable
9HJ4283111001
Soft carrying pouch
9HJ5383101001 Power cord
For U.S., Canada etc.
9HJ4283114001For Europe, except U.K.
9HJ4283116001For U.K., Hong Kong
and Singapore
9HJ4283117001For Australia, New
Zealand and Oceania
9HJ4283118001
• Depending on the region, projectors only ship with one power cord (See above). Use the...

Setup & Connections
13
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the side of the projector.
Power cord
Connecting the Projector
CAUTION
•Make sure you connect the power cord firmly into the AC socket.
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images.
Connecting a computer to the projector using the DVI digital cable—Digital connection instructions
1Connect one end of the DVI digital cable...

Setup & Connections
14
Connecting the Projector
Connecting a computer to the projector using the DVI-Analog to VGA adaptor or the DVI-Analog
to VGA  cable—Analog connection instructions
1Connect one end of the supplied computer RGB cable
using the supplied DVI-Analog to VGA adaptor to the
DVI-DIGITAL/ANALOG INPUT 1 port on the projector,
or connect the DVI side of the supplied DVI-Analog to
VGA cable to the DVI-DIGITAL/ANALOG INPUT 1 port
on the projector.
2Connect the other end of the computer RGB cable...

Setup & Connections
15
Connecting the Projector
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player and other audiovisual equipment.
CAUTION
•Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR or laser disc player) using the standard video input
S-video cable
1Connect the supplied S-video cable to the S-VIDEO
INPUT 2 terminal on...

Setup & Connections
16
Connecting the Projector
Connecting a video source (DTV* decoder or DVD player) using the DVI-DIGITAL/ANALOG INPUT
1 port
1Connect one end of the supplied DVI-Analog to VGA
adaptor to the DVI-DIGITAL/ANALOG INPUT 1 port on
the projector.
2Connect the other end of the DVI-Analog to VGA adaptor
to the video source using the HD-15/RCA cable (sold
separately).
3To use the built-in audio system, connect one end of
the supplied AV audio cable to the AUDIO INPUT
terminal on the...

Setup & Connections
17
Connecting the Projector
Connecting the Projector to a Monitor
When the ANALOG OUTPUT port on the projector is connected to a monitor with RGB input, the computer can be
used to display the output image to the projector and the monitor simultaneously. Use the supplied computer RGB
cable to connect them.
1Connect one end of the supplied computer RGB cable to the ANALOG OUTPUT port on the projector.
2Connect the other end to the RGB input port on the monitor.
3 RS-232C cable
(null...

Operation
18
Operation
Basic Operations
1Make the necessary connections before pro-
ceeding. Connect the power cord to a wall outlet.
The POWER indicator illuminates red and the
projector enters standby mode.
2Press ON/OFF on the projector or POWER on the
remote control to turn on the power.
ProjectorMaintenance indicators
When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.
Green: Lamp is ready.
Flashing green: Warming up.
Red: Change the lamp.Maintenance...