Sharp Projector Pg M10s User Manual

19
Basic Operation
Adjuster Adjustment
There are two adjusters: one on the right side of the back
panel and another in the front center of the unit.
1Use right hand to lift the front of the unit to
approximately the desired adjustment angle.
2Press the foot release button on the front.
Loosen the foot release and allow it to drop into position.
3Release the button.
The extended foot release will be locked.
4Rotate the contact surfaces of the rear adjuster either
clockwise or counterclockwise to...

20
Basic Operation Basic Operation
Using the Remote Control (Input Selection)
Using the Remote Control (Input Selection)
Operating from the main unit
Inputs can be selected not only by operating the remote control
but also by using the projector’s INPUT SELECT button.
ON/OFFINPUT SELECTAUTO SYNC
POWER STATUS
1Press the VIDEO button.
The video signal (VIDEO, S-VIDEO) connected to the
input terminal of this unit will be detected and
projected automatically. If a video signal is not
detected, the message NO...

21
Basic Operation
The remote control of this unit can be used as the PC mouse (wireless mouse function) by connecting the MOUSE terminal of
this unit and the PC.
Remote control mouse functions
• The cursor key on the remote control operates the computer mouse functions.
• If a computer running Windows is connected, the ENTER button on the remote
control operates as the computer mouse left click button and the R-CLICK/EXIT
button as the computer mouse right click button.
• If a Macintosh computer is...

22
Basic Operation Basic Operation
Various functions while using the unit
Automatic Screen Adjustment
Press the AUTO SYNC button.
AUTO SYNC
The position and size of the input image will be
adjusted automatically in accordance with the
resolution.
• Operation is the same as with the AUTO SYNC button of the main
unit.
• When the optimum image cannot be achieved with Auto Sync
adjustment, use manual adjustments.
Freezing animated images
You can capture the desired frame of a moving picture.
Press the FREEZE...

23
Basic Operation
Enlarging the picture
Press the ENLARGE + button.
While the button is pressed, the picture is enlarged.
Release the button at the desired size.
ENLARGE
The quality of the enlarged picture deteriorates compared
to the original size picture.
Screen Reduction
Press the ENLARGE – button.
When this button is released, the picture will return
to 90% reduction.
ENLARGE
Original size
Enlarged picture
Enlarged
pictureStandard
picture
To move to the desired portion of the
enlarged picture
Press...

24
Menu Operation Menu Operation
Menu Structure
The normal menu will be
displayed when the MENU button
is pressed with the remote control
FLIP COVER closed.The numerals noted in  are reference page numbers.
Normal menu
For VIDEO, S-VIDEO and component video (YPBPR) input
The 
advanced menu will be
displayed when the MENU button
is pressed with the remote control
FLIP COVER open.
Advanced menu
For VIDEO, S-VIDEO and component video (YPBPR) input
Common menu
Common menu
Menu operation
MOUSEON/OFF...

25
Menu Operation
Normal menu
RGB input
Advanced menu
• The Advanced menu cannot be used unless the FLIP COVER of the supplied remote control is open.
RGB input
Menu operation
30
30
30
33
34
30
30
31
31
31
32
32
26
26
28
28
28
29
29 

26
Menu Operation Menu Operation
Adjusting the picture elements
The picture elements such as brightness, contrast, white balance, and so on can be adjusted individually for each input
source. The adjustable items vary depending on the input source.
To close the menu
Press the R-CLICK/EXIT button.
1Select the input source (see page 20)
2Press the MENU button to display the menu,
hold down the cursor 
 /  keys or the
MENU button and then select “IMAGE”.
3Press the cursor  /  keys to select
“BRIGHTNESS”....

27
Menu Operation
Adjusting the projected image from the computer
The unit selects the most suitable resolutions as shown in the “Timing Chart” below according to the incoming signals from the
COMPUTER input terminal. However, you may need manual adjustment depending on the computer. If you have any vertical
banding, noise, dot interference, or crosstalk on the projected picture, adjust the clock frequency with “CLOCK” then the clock
phase with “PHASE” (see page 28). You can also adjust the horizontal...

28
Menu Operation Menu Operation
Manual Adjustment of Personal Computer Images
To close the menu
Press the R-CLICK/EXIT button.
Adjusting Clock Frequency and Phase
1Select RGB as the input (page 20).
2Press the MENU button to display the main
menu and then press the cursor 
 /  keys
to select the “IMAGE”.
3Press the cursor  /  keys to select the
“CLOCK”.
4Press the cursor 
 /  keys and adjust the
image width in relation to the screen.
Adjustment is performed in dot units. Adjust to the
position where...