Sharp Projector Pg Ls2000 User Manual

39
Useful        
Features
Menu operation  n Page 36
2  Adjusting the Image
Adjustment 
items O
 button Q button
Contrast For less  contrast.For more 
contrast.
Bright For less  brightness.For more 
brightness.
Color*
1For less color 
intensity. For more color 
intensity.
Tint*
1For making skin 
tones purplish. For making skin 
tones greenish.
Sharp*
1For less 
sharpness. For more 
sharpness.
Red*
2For weaker red. For stronger  red.
Blue*
2For weaker 
blue. For stronger 
blue.
BrilliantColor™*2*3For...

40
5Selecting the Film Mode
This function provides high-quality playback 
of images originally projected at 24 fps, such 
as movies on DVDs.
Selectable items Description
Auto Films are detected automatically.
Off Films are not detected.
This function is available for the following 
signals.
With COMPUTER/COMPONENT input:
- 480 I
- 576 I
With VIDEO input:
- All signals
•
Note
6Reducing Image Noise (DNR)
Video digital noise reduction (DNR) provides 
high quality images with minimal dot crawl 
and cross...

41
Useful        
Features
Signal Adjustment (“SIG-ADJ” Menu)
Menu operation  n Page 36
0
0
0
0Phase
ClockH-Pos
V-Pos
Reset
Auto 1024 x 768
0 IRE
Resolution
Signal Type
Video Setup Auto
Video SystemStandard
Dynamic Range
Signal Info   1024 x 768H 48.3 kHz / V 60.0    Hz
SEL./ADJ. ENTER END
Pict.
SIG-ADJ SCR PRJ1 PRJ2
1
3
6
7 2
45
1Adjusting the Computer Image
If the optimum image cannot be obtained with 
Auto Sync adjustment, use the SIG-ADJ function.
Selectable 
items Description
Clock Adjusts vertical...

42
5Setting the Video System
The video input system mode is factory preset 
to “Auto”; however, a clear picture from the 
connected audio-visual equipment may not be 
received, depending on the Video signal 
difference.
In that case, switch the Video signal.
Selectable items
Auto
PA L
SECAM
*NTSC4.43
NTSC3.58
PA L- M
PA L- N
PA L- 6 0
* When reproducing NTSC signals in PAL  video equipment.
The Video signal can only be set in VIDEO 
mode.
When “Video System” is set to “Auto”, you 
may not receive a...

43
Useful        
Features
Adjusting the Projected Image (“SCR-ADJ” Menu)
Menu operation  n Page 36
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Closed Caption Overscan
Background
Setup Guide
PRJ Mode On
Front
Wall Color
Language Off
English On
Off
Logo On Normal
Pict. PRJ1 PRJ2
SIG
SCR-ADJ
98
0
56
4 3
21
7
1Setting the Resize Mode
Use this function to stretch the image 
vertically or horizontally or when the edges of 
the image cannot be seen.
 For details of the Resize mode, see...

44
4 Setting the Overscan
This function allows you to set the overscan area 
(display area).
Selectable 
items Description
 On The input area is displayed without the  screen edges.
 Off The whole input area is displayed.
This function is available for the following 
signals.
With COMPUTER/COMPONENT or HDMI* 
input:
- 480P
- 540P
- 576P
- 720P
- 1035 I
- 1080 I/1080P
* PG-LX2000 only
If noise appears at the screen edges when 
“Off” is selected, set the function to “On”.
Also see “About Copyrights” on...

45
Useful        
Features
7   Selecting the Background
 Image
Selectable items Description
Logo Sharp logo screen
Blue Blue screen
None —
8Selecting the Setup Guide
Selectable items Description
On Displaying the Setup Guide  when turning the projector on.
Off Not displaying the Setup Guide.
9  Reversing/Inverting
 Projected Images
Selectable items Description
Front Normal image (Projected from  the front of the screen)
Ceiling + Front Inverted image (Projected from  the front of the screen with an...

46
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)
Menu operation n Page 36Q PRJ-ADJ1
SEL./ADJ. ENTER END
Auto Power Off On
Auto Restart On
Speaker On
Off
Keylock
System Lock Fan Mode Normal
Disable
Auto Sync On
Pict. SCR
PRJ-ADJ1
SIG PRJ2
1
2
3
4
5
7
6
1  Auto Sync (Auto Sync
 Adjustment)
Selectable 
items Description
On Auto Sync adjustment will occur when  the projector is turned on or when the 
input signals are switched, when 
connected to a computer.
Off Auto Sync adjustment is not...

47
Useful        
Features
6 System Lock Function
This function prevents unauthorized use of the 
projector. Once this function is activated, 
users must enter the correct keycode each 
time the projector is turned on. 
We suggest 
you record the keycode in a safe place 
where only authorized users have access.
Info
If you lose or forget your keycode, contact 
your nearest Sharp Authorized Projector 
Dealer or Service Center (see page 
69). Even 
if the product warranty is valid, the keycode 
reset will...

48
7Keylock Function
Use this function to lock the operation buttons 
on the projector.
This function can be set using either the menu 
screen or 
ENTER on the projector.
a
Setting with the menu screen
Selectable 
items Description
On All buttons on the projector, except  STANDBY/ON , are locked.
Off Turns off the Keylock function.
a 

Setting with the projector buttons
Locking the Operation Buttons
1 Hold down  ENTER on the 
projector for about 5 seconds 
while the projector is being 
turned on.
The...