Sharp Projector Pg F261x User Manual

29
Basic
Operation
Displaying the Black Screen
and Turning off the Sound
T emporarily
Adjusting the Volume
Switching the Input Mode
Press  COMPUTER , DVI , S-VIDEO  or
VIDEO  on the remote control to select
the input mode.
• When you press  INPUT on the projector or  DVI
on the remote control, the INPUT list appears.
Press  P/R  to switch the INPUT mode.
Select the appropriate input mode for
the connected equipment.
Press  VOL +/–  on the remote control or
– O /Q + on the projector to adjust the vol-...

30
Image Projection (Continued)
Resize Mode
This function allows you to modify or customize the resize mode to enhan\
ce the input image. De-
pending on the input signal, you can choose “NORMAL”, “BORDER”\
 or “STRETCH” image.
Press RESIZE .•See page 41 for setting on menu screen.
Computer
RESIZE button
*Mode for projecting an image with the original aspect ratio without cutting any por\
tions.
: Cutout area on which images cannot be projected.
* *
*
Input Signal NORMALOutput screen image
Computer Image...

31
Basic
Operation
* *
*
*
*
* **
VIDEO
•
“STRETCH” is fixed when 540P, 720P, 1035 I or 1080 I signals are entered.
Input Signal
D VD / Video Image type Output screen image
NORMAL BORDERSTRETCH
480 I, 480P, 576 I,
576P, NTSC, PAL,
SECAM
540P, 720P, 1035 I,
1080 I
4:3 aspect ratio
Letter box
Squeezed 16:9 image
Squeezed 4:3 image 16:9 aspect ratio1
6:9 aspect ratio
(4:3 aspect ratio in 16:9)
* Mode for projecting an image with the original aspect ratio without cutting any por\
tions.
: Cutout area on...

32
Operating with the Remote Control
Displaying and Setting the
Break Timer
Press BREAK TIMER .•The timer starts to count down from 5
minutes.1
2
Press  P/R /O /Q  to adjust the
length of the break time.
• Increases with  P or  Q
5 minutes  s 6 minutes  s 60 minutes•Shortens with  O or  R4 minutes  s 3 minutes  s1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press  BREAK TIMER .
•Break Timer does not function...

33
Useful
Features
Auto Sync
(Auto Sync Adjustment)
Freezing a Moving Image
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page  46.)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
Press  AUTO SYNC  to manually adjust
with Auto Sync function.
Press  FREEZE .
•The projected image is frozen.
Press  FREEZE  again to return to
the moving image from the cur-
rently connected device.
1
2
Note
Selecting...

34
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can\
 use
the remote control as the computer mouse.
If the computer is placed too far away from the projector to be connecte\
d via the
USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate
the projector with the remote control.  For details, see the operation m\
anual of
the receiver.
Connecting with a USB cable
or
Remote receiver 
(optional, AN-MR2)To...

35
Useful
Features
The following shows the items that can be set in the projector.
Menu Items
“Screen adjustment (SCR-ADJ)” menu
COMPUTER (Component),
D VI (Component), S-VIDEO, VIDEO input
“Picture” menu
Picture Mode
Contrast 0 0
0
0
0
BrightRedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. ENTER END
Picture SCR - ADJ PRJ - ADJ Help
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
0
Sharp
1CLR TempBright Boost
Progressive 3D Progressive Standard
Reset
SEL./ADJ. ENTER END
Picture...

36
“Projector adjustment (PRJ-ADJ)” menu
Auto Power Off
System Sound
System LockhOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100% Picture SCR - ADJ
PRJ - ADJHelp
SEL./ADJ. ENTER END
Speaker On
Audio Input Audio 1RS-232C 9600bpsFan Mode Normal
Disable
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
Picture SCR -...

37
Useful
Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press  MENU/HELP .•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for COMPUTER (RGB) input
Press Q or  O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0 0
0
0
0
BrightRedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. ENTER END...

38
Using the Menu Screen (Continued)
Press P or  R and select “Bright”
to adjust.
• The selected item is highlighted.
•P ress  ENTER  again to return to the pre-
vious screen.
Press  O or  Q to adjust the item
selected.
• The adjustment is stored.
Press  MENU/HELP .•The menu screen will disappear.
3
4
5
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
15
Bright
Picture Mode
Contrast 0
0
0
0
RedBlue
1CLR TempBright Boost
Lamp Setting Standard
Bright
Reset
SEL./ADJ. Single ADJ END
Picture SCR - ADJ PRJ - ADJ Help...