Sharp Projector Pg F255w User Manual

37
Useful
Features
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language Front
English On Logo On Stretch
Pict.
SCR-ADJ PRJ Net. Help
Main menu Sub menuSCR - ADJ
Page 44
Language
Image Shift Resize
Page
 44
Page  44
Page  44
Page  44
Page  45
Page  45
Page  45
Page  45
Keystone
OSD Display [On/Off]
Background
Setup Guide [On/Off]
PRJ Mode Logo
Blue
None
Front
Ceiling + Front
Rear
Ceiling + Rear
+80
-80
+40
-40
Normal
Full
Dot By Dot
Area Zoom
V-Stretch...

38
SEL ENTER END There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settingsSEL.
Pict. SCR PRJ Net.HelpThe items you can set with the “Help”
menu
“Help” menu n Page 51•Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
•Data image is not centered
Auto Sync
H-Pos
V-Pos
•Color is faded or poor
COMPUTER/COMPONENT or DVI input
Signal type:...

39
Useful
Features
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press  MENU/HELP .•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for COMPUTER (RGB) input
Press Q or  O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0 0
0
Bright
Standard
SEL./ADJ. ENTER END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
1On...

40
Press P or  R and select “Bright”
to adjust.
• The selected item is highlighted.
•P ress  ENTER  again to return to the pre-
vious screen.
Press  O or  Q to adjust the item
selected.
• The adjustment is stored.
Press  MENU/HELP .•The menu screen will disappear.
3
4
5
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode Contrast 0
0Standard
SEL./ADJ. Single ADJ END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
1On
Bright
Reset
15
Bright
DNR Off
Picture
SCR PRJ Net. Help...

41
Useful
Features
Picture Adjustment (“Picture” Menu)
Standard
Presentation
Movie
Game
*sRGB
Q PAGE1 QPAGE2
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END 0
0
Red
Blue
Picture
SCR PRJ Net. Help1
2
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduction of
images from a computer.
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting...

42
2
2 2
2
2  Adjusting the Image
*1 Not displayed in the RGB input mode.
*2 Not adjustable/selectable when selecting “sRGB”.
*3  BrilliantColor™ uses Texas Instruments’
BrilliantColor™ technology. As the BrilliantColor™
level is increased, the image becomes brighter
while the color reproduction is kept at a high level.
Q  button
For morecontrast.
For more
brightness.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.For stronger red.For stronger blue.For making the
effect...

43
Useful
Features
5
5 5
5
5  Progressive
•In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50...

44
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language Front
English On Logo On Stretch
Pict.
SCR-ADJ PRJ Net. Help
876
4 3
21
5
1
1 1
1
1  Setting the Resize Mode
•For details of the Resize mode, see pages
31  and  32.
•Y ou can also press  RESIZE on the remote con-
trol to set the resize mode. (See page  31.)
Note
2
2 2
2
2 Adjusting the Image
Position
You can move the projected image vertically.
Q...

45
Useful
Features
Menu operation  n Page  39
The projector can switch the on-screen display
language among 17 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear Description
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
8
8 8
8
8Selecting the On-screen
Display Language
7
7...

46
SEL./ADJ. ENTER END
Auto Power Off
System Sound
System Lock
hOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100%
Speaker On
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable
Auto Sync On
Pict. SCR
PRJ-ADJNet. Help
1
2
3
4
5
6
7
8
9
0
Menu operation  n Page  39
•When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes....