Sharp Projector PG-D3510X PG-D3010X PG-D2710X User Manual

47
Useful        
Features
Adjusting the Projected Image (“SCR-ADJ” Menu)
Menu operation n Page 40
SEL./ADJ. ENTER END Resize
Image Shift 0
0
Keystone
OSD Display
Closed Caption Overscan
Background
Setup Guide
PRJ ModeOn
Front
Wall Color
LanguageOff
English On
Off
Logo On Normal Pict. PRJ1 PRJ2 Net.SIG
SCR-ADJ
98
0
56
4 3
21
7
1 Setting the Resize Mode
Use this function to stretch the image 
vertically or horizontally or when the edges of 
the image cannot be seen.
 For details of the Resize mode, see...

48
4 Setting the Overscan
This function allows you to set the overscan area 
(display area).
Selectable 
itemsDescription
 On The input area is displayed without the 
screen edges.
 Off The whole input area is displayed.
This function is available for the following 
signals.
With COMPUTER/COMPONENT 1 or 2 input:
- 480P
- 540P
- 576P
- 720P
- 1035I
- 1080I/1080P
If noise appears at the screen edges when 
“Off” is selected, set the function to “On”.
Also see “About Copyrights” on page 
32. 


Note
5...

49
Useful        
Features
7  Selecting the Background
 Image
Selectable items Description
Logo Sharp logo screen
Blue Blue screen
None —
8 Selecting the Setup Guide
Selectable items Description
On Displaying the Setup Guide 
when turning the projector on.
Off Not displaying the Setup Guide.
9 Reversing/Inverting
 Projected Images
Selectable items Description
Front Normal image (Projected from 
the front of the screen)
Ceiling + Front Inverted image (Projected from 
the front of the screen with an...

50
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)
Menu operation n Page 40Q PRJ-ADJ1
SEL./ADJ. ENTER END Auto Power Off On
Auto Restart On
Speaker On
Off Keylock9600bps
System Lock RS-232C
Fan Mode Normal
Disable Auto Sync OnPict. SCRPRJ-ADJ1 SIG PRJ2 Net.
1
2
3
4
5
7
6
8
1 Auto Sync (Auto Sync
 Adjustment)
Selectable 
itemsDescription
On Auto Sync adjustment will occur when 
the projector is turned on or when the 
input signals are switched, when 
connected to a computer.
Off Auto Sync adjustment...

51
Useful        
Features
6 Fan Mode Setting
This function changes the fan rotation speed.
Selectable 
itemsDescription
Normal Suitable for normal environments.
High Set when using the projector at 
altitudes of approximately 1,500 meters 
(4,900 feet) or more. 
When “Fan Mode” is set to “High”, the fan rotation 
speeds up, and the fan noise becomes louder.
7 System Lock Function
This function prevents unauthorized use of the 
projector. Once this function is activated, 
users must enter the correct...

52
8 Keylock Function
Use this function to lock the operation buttons 
on the projector.
This function can be set using either the menu 
screen or ENTER on the projector.
a
Setting with the menu screen
Selectable 
itemsDescription
On All buttons on the projector, except 
STANDBY/ON, are locked.
Off Turns off the Keylock function.
a

Setting with the projector buttons
Locking the Operation Buttons
1 Hold down ENTER on the 
projector for about 5 seconds 
while the projector is being 
turned on.
The Keylock...

53
Useful        
Features
  Setting the FUNCTION
 Button Operation
You can assign one of the following functions 
to the FUNCTION button on the remote con-
trol. The assigned function can be performed 
by just pressing FUNCTION.
Selectable items Description
Input Search Automatically searches for and 
switches to the appropriate Input 
mode.
Audio Mute For temporarily turning off the 
sound. Press FUNCTION again 
to turn on the sound
Image Shift For moving the projected image 
vertically. (See page...

54
Setting Up the Projector Network Environment (“Network” Menu)
Menu operation n Page 40
SCR SIG PRJ1 PRJ2
SEL./ADJ. ENTER END Pict.Network
Password Disable
DHCP Client Off
Restart Network
Reset Network SettingTCP/IP
IP AddressXXX.XXX.XXX.XXXMAC AddressXX : XX : XX : XX : XX : XXProjector
XX-XXXX
Link
  Disconnected6 4
23
1
5
1 Setting a Password
If you do not want others to change the setting 
for the “Network” menu, set a password.
a
Setting a Password
1  Select “Password”, then press 
ENTER or Q....

55
Useful        
Features
2 DHCP Client Setting
Connect the L AN cable before turning the 
projector on. If not, the DHCP Client function 
does not work.
Selectable items Description
On Obtains con guration 
parameters for TCP/IP network 
automatically.
Off Sets the TCP/IP manually.
Select “On” for “DHCP Client”. “Obtaining IP 
Address...” appears, then the menu screen 
appears. Confi rm the parameters of IP 
Address, Subnet Mask and Gateway on the 
TCP/IP screen.
If the DHCP server is not available,...

56
6 Con rming the
 Projector Information
You can confi rm the following items.
Selectable 
itemsDescription
IP Address The IP address of the projector is 
displayed.
MAC Address The MAC address of the projector is 
displayed.
Projector The projector name is displayed. 
Link Displays the network connection 
status.
Connected Connected to the 
network.
Disconnected Disconnected from 
the network.
For information on how to change the 
projector name, see “SETUP MANUAL” 
contained in the supplied CD-ROM....