Sharp Projector Pg C45s User Manual

Connections and Setup
-17
Connecting the Power
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
Power codeSupplied
accessory 

-18
Connecting the Projector to a Computer
Connecting the thumbscrew cables

Connect the thumbscrew cable making sure that
it fits correctly into the terminal. Then, firmly se-
cure the connectors by tightening the screws on
both sides of the plug.

Do not remove the ferrite core attached to the RGB
cable.
Ferrite core
Connecting to a Computer
Using the RGB Cable
1Connect the projector to the
computer using the supplied
RGB cable.
•Secure the connectors by tightening
the thumbscrews.
2To input audio...

Connections and Setup
-19
“Plug and Play” function (when connecting to a 15-pin terminal)

This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.

Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC...

Connecting to Video Equipment
Connecting the Projector to Other Devices
-20
1S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video, a Composite
Video or an Audio Cable
Using an S-video, video, or audio cable, a VCR,
laser disc player or other audio-visual equip-
ment can be connected to INPUT 3, INPUT 4
and AUDIO (L/R) input terminals.
1Connect the projector to the
video equipment using an S-
video cable or a composite
video cable (both commercially
available).
2Connect...

Connections and Setup
-21
Optional
cable3RCA to 15-pin D-sub cable
Type: AN-C3CP
(910 (3.0 m))
To analog component
output terminal
To audio output terminal
2ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
13 RCA to 15-pin
D-sub cable (sold separately)
DVD player or
DTV* decoder
Connecting to
Component Video
Equipment
Use a 3 RCA to 15-pin D-sub cable when con-
necting to the INPUT 1 or 2 terminal, compo-
nent video equipment such as DVD players
and DTV* decoders.
*DTV is the umbrella...

Connecting to an Amplifier
Connecting to an
Amplifier or Other Audio
Components
Using a ø3.5 mm stereo minijack to RCA au-
dio cable, an amplifier or other audio compo-
nents can be connected to the AUDIO OUT-
PUT terminal.
Connect the projector to the amplifier
using a ø3.5 mm 
stereo minijack to
RCA 
audio cable (commercially
available).
Info
•Always turn off the projector before
connecting to audio components, in order
to protect both the projector and the
components being connected.
•By using...

Connections and Setup
-23
Connecting to a
Computer Using a DIN-
D-sub RS-232C Adaptor
and an RS-232C Serial
Control Cable
When the RS-232C terminal on the projector
is connected to a computer with a DIN-D-sub
RS-232C adaptor and an RS-232C serial con-
trol cable (cross type, sold separately), the
computer can be used to control the projec-
tor and check the status of the projector. See
page 89 for details.
1Connect the supplied DIN-D-
sub RS-232C adaptor to an RS-
232C serial control cable (sold...

-24
Optional
cableComputer RGB cable (3210 (10.0 m))
Type: AN-C10BM
AN-C10MC
AN-C10PC
Connecting to a Monitor
Watching Images on
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using two
sets of an RGB cable. An RGB cable is sup-
plied with this projector. You need to buy an-
other RGB cable for connecting the projector
to a monitor.
1Connect the projector to the
computer and monitor using
RGB cables (one is supplied,
the other is sold...

Connections and Setup
-25
FORWARD
button
Using the Wireless Presentation Function of the
Remote Control
The Wireless Presentation function on the projector works the same as the [Page Up] and
[Page Down] keys on a computer keyboard. It can also be used to move forward or backward
when viewing images of presentation software such as PowerPoint
TM.
Using the Wireless Pre-
sentation Function
1Connect the projector to the
computer using the supplied
USB cable.
Note
•This function only works with the...

Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote
Control to the Projector
When the remote control cannot be used due
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service part QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
ø3.5 mm minijack cable
(commercially available or available as...