Sharp Projector Pg C30xu User Manual

							LCD PROJECTOR
OPERATION MANUAL
Important
Information
Setup & Connections
Operation
Useful FeaturesMaintenance &
TroubleshootingAppendix
MODEL
PG-
C30XU  
						

							E-1
Important
InformationIMPORTANT
For your assistance in reporting the loss or theft of your
Color LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of “Supplied Accessories”
on page 10.
Before using the LCD projector, please read this operation manual carefully.
OPERATION MANUALENGLISH
Model No.: PG-
C30XU
Serial No.:
There are two important reasons for prompt warranty registration of your new SHARP LCD Projector,
using the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification, or
recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE
READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the operation manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the interference at his own
expense.
U.S.A. ONLY
U.S.A. ONLY
The enclosed computer cable must be used with the device. The cable is provided to ensure that the device
complies with FCC Class A verification.
U.S.A. ONLY
WARNING:High brightness light source. Do not stare into the beam of light, or view directly. Be especially
careful that children do not stare directly into the beam of light.
WARNING:To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING:FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this equip-
ment.
See bottom of actual set.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREW.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk or electric shock to
persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
PG-C30XU/CD (E)-a00.5.19, 3:44 PM 1 
						

							E-2
Important
Information
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to
defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and
servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these “IMPORTANT
SAFEGUARDS” carefully before use.
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be retained
for future reference.
3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water–for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to
the product. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9. Transportation
A product and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
product and cart combination to
overturn.
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product and
to protect it from overheating. The openings should never
be covered or blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your product dealer or local power company. For products
intended to operate from battery power, or other sources,
refer to the operating instructions.
12. Grounding or Polarization
This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type
plug.13. Power-Cord Protection
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they
exit from the product.
14. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage
to the product due to lightning and power-line surges.
15. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire
or electric shock.
16. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
17. Servicing
Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following
conditions:
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into
the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions, as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
e. If the product has been dropped or damaged in any
way.
f. If the product exhibits a distinct change in
performance, this indicates a need for service.
19. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
20. Safety Check
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating
condition.
21. Wall or Ceiling Mounting
This product should be mounted to a wall or ceiling only
as recommended by the manufacturer.
22. Heat
This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
PG-C30XU/CD (E)-a00.5.19, 3:44 PM 2 
						

							E-3
Important
Information
Outstanding Features
1. ADVANCED COMPATIBILITY WITH  HIGH-END WORKSTATIONS
AND PCS
Compatible with up to 200 Hz vertical refresh rate, Sync on Green and Composite Sync signals
for use with a wide variety of high-end PCs and Workstations. (Page 11)
2. FOR USE WITH DTV
Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder
or similar video systems. (Page 13)
3. ADVANCED VIDEO  CIRCUITRY
Provides high quality images with minimal dot crawl and cross color noise.
4. 3D DIGITAL UNIFORMITY
Equipped with new 3D digital uniformity technology for a clearer, more uniform image.
5.ANTI-ALIASING DIGITAL KEYSTONE CORRECTION
Digitally adjusts an image that is projected at an angle while maintaining image quality and
brightness. (Page 19)
6. DIGITAL IMAGE SHIFT FUNCTION
Allows digital adjustment of 16:9 wide-screen images up or down for easier viewing. (Page 20)
7. EASY-TO-USE GRAPHICAL USER INTERFACE (GUI)
A multi-color, icon-based menu system allows for simple image adjustments. (Page 23)
8. USER-FRIENDLY DESIGN
The two-color design along with an intuitive Graphical User Interface (GUI) makes this projector
very easy to set up and adjust.
9. AUTO SYNC TECHNOLOGY FOR AUTOMATIC IMAGE
PERFECTION
Automatically makes any necessary adjustments for perfectly synced computer images. (Page 32)
10.INTELLIGENT COMPRESSION AND EXPANSION
By using intelligent resizing technology, this projector can display higher and lower resolution images in detail without
compromising quality. (Page 36)
11.XGA RESOLUTION FOR HIGH RESOLUTION PRESENTATIONS
With XGA (1,024 
 768) resolution, this projector can display very detailed presentation information.
12. UXGA COMPATIBLE
UXGA (1,600 
 1,200) resolution images are intelligently resized to 1,024 
 768 for full-screen or default presentations.
13. CUSTOMIZABLE STARTUP SCREEN
Allows you to load a custom startup image (i.e. your company logo) to be displayed while the projector is warming up.
(Page 38)
14. BUILT-IN PRESENTATION TOOLS
A variety of helpful presentation utilities are incorporated to enhance presentations. These include “Stamp” functions, “Break
Timer”, and “Digital Image Magnification”. (Page 43)
H LX
PG-C30XU/CD (E)-a00.5.19, 3:44 PM 3 
						

							E-4
Important
InformationImportant Information
Contents
IMPORTANT SAFEGUARDS …………………… 2
Outstanding Features …………………………… 3
Contents …………………………………………… 4
Usage Guidelines ………………………………… 5
How to Access the PDF Operation Manuals
(for Windows and Macintosh) ……………… 6
For SHARP Assistance (U.S.A. only) ………… 6
Part Names ………………………………………… 7
Setup & Connections
Supplied Accessories……………………………10
Connecting the Projector………………………11
Basic Operations…………………………………16
Setting up the Screen……………………………18
Operating the Wireless Mouse from the
Remote Control………………………………21
Using the GUI (Graphical User Interface)
Menu Screens…………………………………23
Selecting the On-screen Display Language…25
Selecting the Video Input System Mode
(INPUT 3 (VIDEO) mode only)………………25
Picture Adjustments………………………………26
Adjusting the Picture……………………………26
Adjusting the Color Temperature……………27
Selecting the Signal Type………………………27
I/P Conversion…………………………………28
Audio Adjustments………………………………28
Computer Image Adjustments
(INPUT 1 or 2 mode only)……………………29
Adjusting the Computer Image………………29
Saving and Selecting Adjustment Settings…30
Special Mode Adjustment……………………31
Checking the Input Signal……………………31
Auto Sync Adjustment…………………………32
Auto Sync Display Function……………………32
Operation
Air Filter Maintenance……………………………46
Lamp/Maintenance Indicators…………………47
Replacing the Projection Lamp…………………48
Using the Kensington Lock……………………49
Troubleshooting……………………………………49
Appendix
Optional Lenses……………………………………50
Transporting the Projector………………………50
Connection Pin Assignments……………………51
RS-232C Port Specifications……………………52
Computer Compatibility Chart…………………54
Specifications………………………………………55
Dimensions…………………………………………56
Guide to Effective Presentations………………57
Glossary……………………………………………61
Index…………………………………………………62
Maintenance & Troubleshooting
Setup & Connections
Operation
Useful FeaturesMaintenance &
TroubleshootingAppendix
Useful Features
Freeze Function……………………………………33
Digital Image Magnification……………………34
Gamma Correction………………………………35
Selecting the Picture Display Mode……………36
Black Screen Function……………………………37
On-screen Display Override Function…………37
Selecting a Background Image…………………38
Selecting a Startup Image………………………38
Economy Mode……………………………………39
Password……………………………………………40
Selecting the Keylock Level……………………41
Checking the Lamp Usage Time………………41
Reverse/Invert Image Function…………………42
Using the Presentation Tools……………………43
Status Function……………………………………44
PG-C30XU/CD (E)-a00.5.19, 3:45 PM 4 
						

							E-5
Important
Information
Usage Guidelines
The laser pointer on the remote control emits a laser beam from the laser
pointer window. This is a Class II laser which may impair your sight if directed
into the eyes. The three marks shown on the left are caution labels for the
laser beam.
•Do not look into the laser pointer window or shine the laser beam on yourself
or others. (The laser beam used in this product is harmless when directed
onto the skin. However, be careful not to project the beam directly into the
eyes.)
•Always use the laser pointer at temperatures between 41°F and 104°F
(5°C and 40°C).
•Use of controls or adjustments, or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Cautions Concerning the Laser Pointer
Laser pointer
window
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE.
CAUTIONLASER RADIATION-
DO NOT STARE INTO BEAM
WAVE LENGTH : 650nm
MAX. OUTPUT : 1mWCLASS II LASER PRODUCT
"COMPLIES WITH 21 CFR SUBCHAPTER J"SHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH, NEW JERSEY 07430
TEL : 1-800-BE-SHARPU.S.A. ONLYREMOTE CONTROL
MODEL NO. : RRMCG1579CESA
DC3V (1.5VX2PCS.)
MADE IN CHINA
FABRIQUÉ AU CHINE
Cautions Concerning the Setup of the Projector
For minimal servicing and to maintain high image quality, SHARP recommends
that this projector be installed in an area free from humidity, dust and cigarette
smoke. When the projector is subjected to these environments, the lens and
filter must be cleaned more often. Periodically the filter should be replaced
and the projector should be cleaned internally. As long as the projector is
properly maintained in this manner, use in these environments will not reduce
the overall operation life. Please note that all internal cleaning must be
performed by an Authorized Sharp Industrial LCD Products Dealer or Service
Center.
•The exhaust vent, the lamp cage cover and adjacent areas may be
extremely hot during projector operation. To prevent injury, do not touch
these areas until they have sufficiently cooled.
•Allow at least 4 inches (10 cm) of space between the cooling fan (exhaust
vent) and the nearest wall or obstruction.
•If the cooling fan becomes obstructed, a protection device will automatically
turn off the projector lamp. This does not indicate a malfunction. Remove
the projector power cord from the wall outlet and wait at least 10 minutes.
Then turn on the power by plugging the power cord back in. This will return
the projector to the normal operating condition.
Notes on Operation
104˚F
(40˚C)
41˚F
(5˚C)
Temperature Monitor Function
If the projector starts to overheat due to setup problems or a dirty air filter,
“TEMP.” and “” will flash in the lower-left corner of the picture. If the
temperature continues to rise, the lamp will turn off, the TEMPERATURE
WARNING indicator on the projector will flash, and after a 90-second cooling-
off period the power will shut off. Refer to “Lamp/Maintenance Indicators” on
page 47, for details.
•The cooling fan regulates the internal temperature, and its performance is
automatically controlled. The sound of the fan may change during projector operation
due to changes in the fan speed.
Lamp Monitor Function
When the projector is turned on after the lamp has been used for 1,400 hours,
“LAMP” and “
” will flash in the lower-left corner of the picture to advise you
to replace the lamp. See pages 48 and 49 for lamp replacement. If the lamp
has been used for 1,500 hours, the projector power will automatically turn off
and the projector will enter standby mode. Refer to “Lamp/Maintenance
Indicators” on page 47, for details.
PG-C30XU/CD (E)-a00.5.19, 3:45 PM 5    
						

							E-6
Important
Information
How to Access the PDF Operation Manuals (for Windows and Macintosh)
PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to
install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet,
you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM.
To Install Acrobat Reader from the CD-ROM
For Windows:
1Insert the CD-ROM in the CD-ROM drive.
2Double click on the “My Computer” icon.
3Double click on the “CD-ROM” drive.
4Double click on the “manuals” folder.
5Double click on the “acrobat” folder.
6Double click on the “windows” folder.
7Double click on the desired installation program
and follow the instructions on the screen.
For Macintosh:
1Insert the CD-ROM in the CD-ROM drive.
2Double click on the “CD-ROM” icon.
3Double click on the “manuals” folder.
4Double click on the “acrobat” folder.
5Double click on the “mac” folder.
6Double click on the desired installation program
and follow the instructions on the screen.
For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com).
For other languages:
If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please download the appropriate
version from the Internet.
Accessing the PDF Manuals
For Windows:
1Insert the CD-ROM in the CD-ROM drive.
2Double click on the “My Computer” icon.
3Double click on the “CD-ROM” drive.
4Double click on the “manuals” folder.
5Double click on the “pg-c30xu” folder.
6Double click on the language (name of the folder)
that you want to view.
7Double click on the “c30” pdf file to access the
projector manuals.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
8Double click on the pdf file.
For Macintosh:
1Insert the CD-ROM in the CD-ROM drive.
2Double click on the “CD-ROM” icon.
3Double click on the “manuals” folder.
4Double click on the “pg-c30xu” folder.
5Double click on the language (name of the folder)
that you want to view.
6Double click on the “c30” pdf file to access the
projector manuals.
Double click on the “saps” pdf file to access the
Sharp Advanced Presentation Software manual.
7Double click on the pdf file.
•If the desired pdf file cannot be opened by double clicking the mouse, start Acrobat Reader first, then specify the desired file
using the “File”, “Open” menu.
•See the “readme.txt” file on the CD-ROM for important information on the CD-ROM not included in this operation manual.
For SHARP Assistance (U.S.A. only)
If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting”
section on page 49. If this operation manual does not answer your question, please call toll free 1-888-GO-SHARP
(1-888-467-4277) for further assistance.
 Or, send us an e-mail at [email protected] .
Our World Wide Web address is http://www.sharplcd.com .
PG-C30XU/CD (E)-a00.5.19, 3:45 PM 6 
						

							E-7
Important
InformationProjector
Part Names
Foot release VOLUME buttons (/)
MENU button
ENTER button UNDO button GAMMA button RESIZE button AUTO SYNC button MUTE button
KEYSTONE button
BLACK SCREEN buttonENLARGE buttonFREEZE buttonINPUT button POWER buttons (ON/OFF)POWER indicator
ADJUSTMENT buttons
(∂/ƒ/ß/©)TEMPERATURE WARNING
indicator LAMP REPLACEMENT
indicator
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Carrying handle Zoom knob
Remote control sensor
Kensington Security Standard
connector
Front and Top View
Side and Rear View
INPUT 1 port (HD 15)
13
11
12
12
11
21
46
5
11
11
12
14
Cooling fan (Exhaust vent)
RS-232C port (9-pin Mini DIN)
AUDIO INPUT 3 terminals (RCA)OUTPUT port for INPUT 1, 2 (HD 15)Speaker
AC socketINPUT 2 port (HD 15)
AUDIO OUTPUT terminal
(3.5 mm stereo minijack)
AUDIO INPUT terminal
for INPUT 1, 2
(3.5 mm stereo minijack)
S-VIDEO INPUT terminal
(4-pin Mini DIN)
VIDEO INPUT 3 terminal
(RCA)
47 17
47 16
17 16
23 20
32 17
36 33
35 34
20 37
23
50
49
19 23
17
21
17Focus knob
Remote control sensor Air filter/Cooling fan (Intake vent)
PG-C30XU/CD (E)-a00.5.19, 3:45 PM 7 
						

							E-8
Important
Information
Front View
Part Names
16
17
37
20
23
22
17
33
34
43
21
17
23
22
23
22
20
32
36
35
22
Rear View
Inserting the batteries
13Press in on the arrow
mark and slide in the
direction of the arrow to
remove the battery cover.2Insert two AA size
batteries, making sure
their polarities match the
 and  marks inside
the battery compartment.Insert the side tabs of
the battery cover into
their slots and press the
cover in until it is
properly seated.
VOLUME buttons
(/)
BACKLIGHT button MUTE button
POWER buttons
(ON/OFF)
LASER POINTER/
MENU button KEYSTONE/BLACK
SCREEN button
RIGHT-CLICK/
ENTER button
UNDO button
INPUT button
AUTO SYNC button
FREEZE button
RESIZE button
ENLARGE button
GAMMA button
TOOLS button
MOUSE/
ADJUSTMENT
switchLEFT-CLICK
button
22
MOUSE/
ADJUSTMENT
buttons (∂/ƒ/ß/©)
Battery
compartment Battery
coverBattery
cover
Remote Control
Top View
5
Remote control
signal transmitter
Laser
pointer
window
PG-C30XU/CD (E)-a00.5.19, 3:45 PM 8 
						

							E-9
Setup & Connections
Setup & Connections
PG-C30XU/CD (E)-b00.5.19, 3:45 PM 9