Sharp Projector Pg C20xu User Manual

E-20
Operation
Setting up the Screen
Projector
Digital Keystone Correction
Remote control• When the image is distorted due to the projection
angle, the digital keystone correction function allows
you to correct it.
• The digital keystone correction can be made by
pressing KEYSTONE, or by setting “Keystone”
correction in the GUI menu.
Using the GUI menu
1Press MENU.
2Press 
∂/ƒ to select “Options”, and then press
ENTER.
3Press 
∂/ƒ to select “Keystone”, and then press
ENTER.
4Press 
∂/ƒ to move the  mark...

E-21
Operation
Operating the Wireless Mouse from the Remote Control
You can use the remote control as a remote mouse.
Connecting the Remote Mouse Receiver
1Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.
2Connect the other end to the USB port on the remote mouse receiver.
Connecting to the USB port on a PC or Macintosh
USB port
USB mouse control
cable
QCNW-5680CEZZ
Remote mouse
receiver
RUNTK0694CEZZ
Use the USB port (PC
or Macintosh) to
connect the...

E-22
Operation
Using the Wireless Mouse
Remote Control/Mouse Receiver Positioning
• The remote control can be used to control the projector within the ranges shown below.
• The remote mouse receiver can be used with the remote control to control the mouse functions of a connected
computer within the ranges shown below.
• The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Operating the...

E-23
Operation
ON/OFF
POWERLAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENUAUTO SYNC
7
2,4,6
3,5
1,8
Using the GUI (Graphical User Interface) Menu Screens
(GUI) On-screen Display
1INPUT 1 (RGB) mode
4 This projector has three sets of menu screens (INPUT 1 (RGB), INPUT 1 (COMPONENT) and INPUT 2 (S-VIDEO)
or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens can be
operated from the projector or the remote control with the following buttons.
s
1INPUT 1 (COMPONENT)...

E-24
Operation
Items on the INPUT 1 (RGB) Mode Menu Bar
Using the GUI (Graphical User Interface) Menu Screens
Main menu Main menuSub menu Sub menu
Fine Sync
Options Signal Info
Lamp Timer
Language English
PRJ Mode
CeilingFront
CeilingRear Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear
Special Modes
480P 640
480 Keystone
Auto Power Off
Background Phase Clock
H-Pos
V-Pos
Reset Contrast Picture
Bright
Red
Blue
Reset
Power Save ModeON
OFF OFF
Blue
None127 127
120 120
127...

E-25
Operation
Items on the INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO)
Mode Menu Bar
Main menu Sub menu
Options Signal Info
Lamp Timer
Language English
PRJ Mode
CeilingFront
CeilingRear Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear Keystone
Auto Power Off
Background Contrast Picture1
Bright
Red
Color
Picture2
Tint
Sharp
Reset Blue
Reset
Power Save Mode
Video System Auto
PAL
NTSC3.58
SECAM
NTSC4.43
PAL M
PAL N
PAL (60Hz)ON
OFF OFF
Blue
None127 127
30 30
30 30
30 30
30 30...

E-26
Operation
Selecting the On-screen Display Language
Projector
(GUI) On-screen DisplayEnglish is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
1Press MENU.
2Press ∂/ƒ to select “Language”, and then press
ENTER.
3Press ∂/ƒ to select the desired language.
4Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5To exit from...

E-27
Operation
ON/OFF
POWERLAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENUAUTO SYNC
2,3,4
2,3
1,5
Picture Adjustments
You can adjust the projector’s picture to your prefer-
ences with the following picture settings. Projector Remote control
(GUI) On-screen Display
INPUT 1 (RGB) mode
INPUT 1 (COMPONENT) mode
INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode
All image adjustment items are returned to the factory preset
settings.
Description of Adjustment Items
For less contrast
For less brightness
For weaker red
For...

E-28
Operation
Computer Image Adjustments (INPUT 1 mode only)
Auto Sync Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
1Press AUTO SYNC.
During Auto Sync adjustment, “Adjusting The Image”
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,...

E-29
Operation
Computer Image Adjustments (INPUT 1 mode only)
Adjusting the Computer Image
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
• Computer image adjustments can be made easily by
pressing AUTO SYNC (). See page 28 for...