Sharp Projector Pg B10s User Manual

-17
Basic Operation
Select the “INPUT 1” using the INPUT button on the projector or the INPUT 1 button on the remote control.
• •• •
•When pressing  on the projector, input mode switches in order of INPUT 1 INPUT 2 INPUT 3 .
• •• •
•When using the remote control, press 
// to switch the INPUT mode.
On the remote
control On the
projector
4.Adjust the projected image
3 33 3
3 Correct trapezoidal distortion
5.Select the INPUT mode
On-screen display (RGB) Correcting trapezoidal distortion using the Keystone...

-18
Image Projection
Turning the Projector on
Connect the required external equipment to the
projector before carrying out the following pro-
cedures. 
(See page 50.)
Info
•The language preset at the factory is English.
If you want to change the on-screen display to
another language, reset the language accord-
ing to the procedure on page 
48.
1Plug the power cord into the wall
outlet.
•The power indicator illuminates red, and
the projector enters standby mode.
2Press  on the projector or
 on the remote...

-19
Projection
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
Press  ,  or  on the remote
control to select the INPUT mode.
• •• •
•When pressing  on the projector, input
mode switches in order of
INPUT 1 INPUT 2 INPUT 3.
Note
•When no signal is received, “NO SIGNAL”
will be displayed. When a signal that the
projector is not preset to receive is received,
“NOT REG.” will be displayed.
•The INPUT mode is not displayed when
“OSD Display” of the “Options” menu is...

-20
Image Projection
Displaying the Black
Screen and Turning off
the Sound Temporarily
Press  on the remote control to
temporarily display a black screen
and turn off the sound.
Note
•Pressing  again will turn the projected
image and sound back on.
Correcting Trapezoidal
Distortion
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction....

-21
Projection
2Press ', ", \ and | to adjust
the Keystone Correction.
•You can also adjust the Keystone Cor-
rection using the 
, ,  and 
buttons on the projector.
Note
•Press  to return to the default setting.
•Straight lines or the edges of images may
appear jagged while adjusting the image.
3Press .
•The on-screen display of the Keystone
Correction mode will disappear.
•You can also use 
 on the projector.
Note
•You can use the same settings used in
NORMAL mode 4:3 for 16:9.
Turning the Power...

-22
Adjusting the Lens
The image is focused and adjusted to the de-
sired size using the focus ring or zoom knob
on the projector.
1Adjust the focus by rotating the
focus ring.
2Adjust zooming by moving the
zoom knob.
Image Projection
Zoom in
Z
o
o
m
 o
ut
Focus ring Zoom knob
300
200
100
84
60
240×180
Projection Distance
160×12080×6067×50
48×36
296–371
(9
.0 m
 –
 11.3 m
)
198–247
(6.0 m
 – 7.5 m
)910–122
(3.0
 m
 – 3.7 m
)82–102
(2
.5 m
 – 3.1 m
)511–73
(1.8 m
 – 2.2 m
)
Picture Size
Indication of the...

-23
Projection
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet at the front and rear
of the projector.
When the screen is in a higher position than
the projector, the projection image can be
made higher by adjusting the projector.
1Press HEIGHT ADJUST button.
•The front adjustment foot comes out.
2Lift the projector to adjust its
height while pressing the
HEIGHT ADJUST button.
•The projector is adjustable up to approxi-
mately 12 degrees (5 steps).
•When...

-24
In addition to the zoom function and adjustment of projection angle using the adjustment foot, it is possible
to move the lens up and down and left and right (360°) to adjust the projection position simply by moving the
lens shift lever on the front of the projector. This is a useful function in cases such as when the screen can
not be moved.
Variable Lens Shift Feature
When moving upward or downward
Adjustable range
Adjustable range
Adjustable rangeAdjustable range
Lens shift lever
Adjustable range...

-25
Projection
Adjusting the Projected
Image Position
Adjust the projected image position
using the lens shift lever.
Info
•When using the projector (during projec-
tion), be sure not to subject the projector to
any impact. If the projector is subjected to
impact, the projection image may deviate
from the adjusted position.
•When transporting or carrying the projec-
tor, attach the lens shipping block and the
lens cap to the projector.
•When the angle is being adjusted using the
adjustment foot,...

-26
Resize Mode
Switching the Resize Mode
Press .
•Pressing  changes the display as shown on
pages 26 and 27.
•To return to the standard image, press 
 while
“RESIZE” is displayed on the screen.
This function allows you to modify or customize the resize mode to enhance the input image.
Depending on the input signal, you can choose “NORMAL”, “DOT BY DOT”,  “BORDER” or
“STRETCH” image.
COMPUTER
STRETCHProjects 16:9 image
evenly over entire screen
(top/bottom blank bands).
Output screen image
Input Signal...