Sharp Projector Pg A10s Sl User Manual

37
Basic Operation
 Gamma (Gamma Correction)
Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the bright-
ness of the brighter portions.
When you are displaying images with frequent dark
scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature
makes the dark scenes easier to see and gives the
impression of greater depth in the image.
Select “Gamma” on the “Picture” menu...

38
Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis-
play mode, and check the input signal. For operation of the menu screen, see pages 32 to 35.
Example:“Fine Sync” menu screen for
INPUT 1 mode
Adjusting the Computer
Image
In case of irregularities such as vertical stripes or
flickering in portions of the screen, adjust “Clock”,
“Phase”, “H-Pos” or “V-Pos” to obtain an optimal
computer image.
Select the item on the “Fine Sync” menu
and adjust the computer image....

39
Basic Operation
 Signal Info (Checking the
Input Signal)
Select “Signal Info” on the “Fine Sync” menu
to check the current input signal informa-
tion.
Note
•The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
A10X_A10S#E_Print#p32_39.p6503.2.4, 2:05 PM 39 

40
Picture Display Mode
Switching the Picture Dis-
play Mode
Press .
•Pressing  changes the display as shown on
pages 40 and 41.
•To return to the standard image, press 
 while
“RESIZE” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “NORMAL”, “DOT BY DOT”,
“BORDER” or “STRETCH” image.
COMPUTER
STRETCHProjects 16:9 image
evenly over entire screen
(top/bottom blank bands).
Output...

41
Easy to Use Functions
VIDEO
4:3 aspect ratio
Letter box
Squeezed 16:9 image
Squeezed 4:3 image
16:9 aspect ratio
16:9 aspect ratio
(4:3 aspect ratio in
16:9 screen)
Output screen image
Input Signal
Image type DVD / Video
480I, 480P, 540P,
NTSC, PAL, SECAM
720P, 1080I (16:9)
: Cutout area on which images cannot be projected.
: Area on which the image is not included in the original signals.
* Mode for projecting an image with the original aspect ratio without cutting any portions.
**
* *
* *
*
*...

42
×1×4×9×16×36×64×2×3
You can instantly freeze a moving image and enlarge a specific portion of an image with the
remote control. Using these functions, you can explain the image to the audience more effec-
tively.
Still and Zoom Image
Freezing a Moving
Image
1Press .
•The projected image is frozen.
2Press  again to return to the
moving image from the currently
connected device.
Displaying an Enlarged
Portion of an Image
1Press .
•Pressing  or  enlarges or reduces
the projected image.
Note
•You can...

43
Easy to Use Functions
Keylock Function
Locking the Operation
Buttons
Hold down  on the projector for
about 3 seconds while the projector is
being turned on.
Note
•The keylock function does not affect the opera-
tion with the remote control buttons.
•You cannot use the keylock function while the
projector is warming up.
Use this function to lock the operation buttons on the projector.
Taking the Keylock off
Hold down  on the projector for
about 3 seconds while the projector is
being turned on.
•You can...

44
You can use the “Options” menu to enhance the usage for the projector. For operation of the
menu screen, see pages 32 to 35.
Example:“Options” menu screen for
INPUT 2 (S-Video) mode
 Lamp Timer (Life) (Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Display the “Options” menu to check the
lamp life status.
Description of Lamp Life
Note
•It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
For lamp...

45
Easy to Use Functions
 Video System (Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select “Video System” on the “Options” menu
and the appropriate video system.
Description of Video Systems
Note
•The video signal can only be set in INPUT 2 or
INPUT 3 mode.
•In “Auto”, images are displayed in PAL even if...

46
 Auto Power Off (Auto
Power Off Function)
When no input signal is detected for more than 15
minutes, the projector will automatically power off
if set to “ON”.
The Auto Power Off function will be disabled if it
has been set to “OFF”.
Select “” (ON) or “” (OFF) in “Auto
Power Off” on the “Options” menu.
Note
•When the Auto Power Off function is set to “ON”,
5 minutes before the power turns off, the mes-
sage “Power OFF in X min.” will appear on the
screen to indicate the remaining minutes be-
fore...