Sharp Projector Dt 500 User Manual

40
“Fine Sync” menu
Clock
Phase0
0
0
0
H-PosV-Pos
Special Modes
Cur. sig. freq : H 33.8 kHz / V 60 Hz Auto Sync
On 1080I Fine Sync INPUT 5
SEL./ADJ.
RETURNENTER
END Reset
Options 2 INPUT 1
SEL./ADJ.
RETURNENTER
END STANDBY Mode
Eco
Fan Mode
Normal RS-232C
9600 bps PRJ Mode
Front
All Reset
Language
English
Main menu Sub menuFine SyncClock
Phase
H-Pos
Reset
Special Modes 1035I
1080I
The resolution changes
depending on the input signal.Page 46Page 46
Page 46
Page 46
Page 46Auto Sync [On/Off] Page 46
Page...

Useful
Features
41
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector.
Press dMENU.• The “Picture” menu screen for the se-
lected input mode is displayed.
Adjustment buttons
(P/R/O/Q)
Example: “Picture” screen menu for INPUT 1
mode
Press Q or O to select the menu
icon to adjust.
• The selected icon is highlighted.
1
2
ENTER button
RETURN button
Menu icons
Picture INPUT 1
Picture Mode
Contrast 0
0
0...

42
Using the Menu Screen (Continued)
Press P or R to select the item to
adjust.
• The selected item is highlighted.
3Picture INPUT 1
Picture Mode
Contrast 0
0
0
0
BrightColorTint0
0 Sharp
0RedBlueStandard
SEL./ADJ.
RETURNSingle ADJ
END
Items to be adjusted
• Press iENTER again to return to the
previous screen.
0 BrightSEL./ADJ.
RETURNRtn. Menu
END Picture INPUT 1
Note
To adjust the projected
image while watching it
Press iENTER.• The selected item (e.g. “Bright”) is dis-
played by itself at the bottom of...

Useful
Features
43
Picture Adjustment (“Picture” menu)
Standard
Natural
Dynamic
Movie1
Movie2
Memory
Picture INPUT 1
Picture Mode
Contrast 0
0
0
0
BrightColorTint0
0 Sharp
0RedBlueStandard
Description
For standard image
A balanced color image is obtained.
A vivid image is obtained.
Makes the black levels of the
dark portions of the screen
more pronounced and vivid.
Reduces glare and creates a
subdued tone.
Allows you to store your picture
adjustment settings. The settings
stored effect each input mode....

44
Picture Adjustment (“Picture” menu) (Continued)
3 33 3
3Adjusting the Color
Temperature
• Values on “CLR Temp” are only for general
standard purposes.
Note
Selectable
items
5500K
6500K
7500K
8500K
9300K
10500KDescription
For lower color temperature for
warmer, reddish incandescent-like
images.
For higher color temperature for
cooler, bluish, fluorescent-like images.
Menu operation n Page 41
P
R
4 44 4
4 Adjusting the Colors
Select “C.M.S.” (Color Management System) in
the “Picture” menu and then press...

Useful
Features
45
6 66 6
6Reducing Image Noise
(DNR)
Menu operation n Page 41
Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.
Selectable items
OFF
Level 1-3Description
DNR does not function.
Sets the DNR level for viewing
a clearer picture.
Set “DNR” to “OFF” in the following cases:
• When the image is blurry.
• When the contours and colors of moving im-
ages drag.
• When TV broadcasts with weak signals are
projected.
Note
7 77 7
7Switching...

46
3 33 3
3Auto Sync (Auto Sync
Adjustment)
• Auto Sync adjustment is also performed by
pressing f AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments.
Note
Selectable items
On
OffDescription
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when...

Useful
Features
47
Using the “Options” Menu
Image Shift
Overscan H
Overscan V0
0
Subtitle00
OSD Display
On Options 1 INPUT 1
h 0 Lamp Timer(Life) 100% Video System
Auto
Signal Type
Auto
HDMI Setting
Standard
Background
Blue
Auto Power Off
On
1
2
3
2
4
5
6
7
8
9
0
Menu operation n Page 41
1 11 1
1Adjusting the Image
Position
You can move the projected image vertically.
• The Image Shift function cannot be selected
when “Resize” is set to “DOT BY DOT”.
• You can also use the IMAGE SHIFT buttons
on the...

48
Menu operation n Page 41
6 66 6
6 Signal Type Setting
Using the “Options” Menu (Continued)
This function allows you to select the input sig-
nal type (RGB or Component) for INPUT 5 or
INPUT 6.
Selectable items
Auto
RGB
ComponentDescription
Automatically selects the
appropriate input signal
between RGB and Component.
Set when RGB signals are
received.
Set when component signals
are received.
4 44 4
4Setting On-screen Display
Selectable
items
On
OffDescription
All On-screen Displays are displayed....

Useful
Features
49
Options 2 INPUT 1
STANDBY Mode
Eco
Fan Mode
Normal RS-232C
9600 bps PRJ Mode
Front
All Reset
Language
English6 5
4
3
2
1
Menu operation n Page 41
Settings on the Options 2 menu
Selectable items
Front
Ceiling + Front
Rear
Ceiling + RearDescription
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image...