Sharp Pnu423 Manual

							
51E

Specifications
nDVI-D input terminal pins
(DVI-D 24 pin)

No.Function No.Function
1 TMDS data 2- 13N.C.
2 TMDS data 2+ 14+5V
3 TMDS data 2/4 shield 15GND
4 N.C. 16Hot-plug detection
5 N.C. 17TMDS data 0-
6 DDC clock 18TMDS data 0+
7 DDC data 19TMDS data 0/5 shield
8 N.C. 20N.C.
9 TMDS data 1- 21N.C.
10 TMDS data 1+ 22TMDS clock shield
11 TMDS data 1/3 shield 23TMDS clock+
12 N.C. 24TMDS clock-
nD-sub input terminal pins
(Mini D-sub 15 pin)

No. Function No.Function
1 Red video signal input 9+5V
2 Green video signal input 10GND
3 Blue video signal input 11N.C.
4 N.C. 12DDC data
5 N.C. 13Hsync signal input
6 GND for red video signal 14Vsync signal input
7 GND for green video signal 15DDC clock
8 GND for blue video signal
nDisplayPort input terminal pins
(DisplayPort 20 pin)

No. Function No.Function
1 MainLane 3- 11Gnd 
2 Gnd  12MainLane 0+ 
3 MainLane 3+  13Gnd 
4 MainLane 2-  14Gnd 
5 Gnd  15Aux + 
6 MainLane 2+  16Gnd 
7 MainLane 1- 17Aux - 
8 Gnd  18Hot-plug detection 
9 MainLane 1+  19Gnd 
10 MainLane 0-  203.3V
nHDMI input terminal pins
(HDMITM Connector)

No. Function No.Function
1 TMDS data 2+ 11TMDS clock shield
2 TMDS data 2 shield 12TMDS clock-
3 TMDS data 2- 13CEC
4 TMDS data 1+ 14N.C.
5 TMDS data 1 shield 15SCL
6 TMDS data 1- 16SDA
7 TMDS data 0+ 17GND
8 TMDS data 0 shield 18+5V
9 TMDS data 0- 19Hot-plug detection
10 TMDS clock+
nRS-232C input terminal pins
(D-sub 9 pin)

No. Function No.Function
1 N.C. 6N.C.
2 Transmitted data 7N.C.
3 Received data 8N.C.
4 N.C. 9N.C.
5 GND 
						

							
52E

Specifications
nDVI-D output terminal pins
(DVI-D 24 pin)

No.Function No.Function
1 TMDS data 2- 13N.C.
2 TMDS data 2+ 14+5V
3 TMDS data 2/4 shield 15GND
4 N.C. 16Hot-plug detection
5 N.C. 17TMDS data 0-
6 DDC clock 18TMDS data 0+
7 DDC data 19TMDS data 0/5 shield
8 N.C. 20N.C.
9 TMDS data 1- 21N.C.
10 TMDS data 1+ 22TMDS clock shield
11 TMDS data 1/3 shield 23TMDS clock+
12 N.C. 24TMDS clock-
nRS-232C output terminal pins
(D-sub 9 pin)

No. Function No.Function
1 N.C. 6N.C.
2 Received data 7N.C.
3 Transmitted data 8N.C.
4 N.C. 9N.C.
5 GND 
						

							
53E
•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. 
•   Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•
  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials 
such as plaster / thin plastic board / wood before starting installation.
•
  This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. 
Install by the most suitable method for the material and the structure.
•
  To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the 
thickness of the mounting bracket.
•
  Do not use an impact driver.
•
  When moving the monitor, hold the parts marked by 

 below. Do not hold the LCD panel. This may cause product 
damage, failure, or injury.

•   After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•   Do not use any screw holes other than VESA holes for installation.
Mounting Precautions   
(For SHARP dealers and service engineers) 
						

							
PN-U553U473U423 Mu EN13G(1)