Sharp Pnu423 Manual

21E

Menu item details
The menu will differ depending on the input mode.
nSCREEN

AUTO (D-SUB)
The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.
Pressing  

ENTER
 
performs adjustment. Use this automatic adjustment when you use the D-SUB to display a PC screen for the 
first time or when you change the setting of the PC. (See page 28.)
SELF ADJUST (D-SUB)
On a D-SUB screen, specify whether to perform screen adjustment automatically or not. 
When ON is selected, the screen is automatically...

22E

nPICTURE

BRIGHT
Adjusts the backlight brightness.
CONTRAST
Adjusts the difference between the bright and dark portions of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT (HDMI/COMPONENT/VIDEO)
Adjusts the hue. Selecting - changes the color towards green, and selecting + changes it towards magenta.
COLORS (HDMI/COMPONENT/VIDEO)
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
COLOR ADJUSTMENT

COLOR MODEChanges the color mode on the screen....

23E

Menu Items
n AUDIO

TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press 

ENTER
.
nSETUP

DATE/TIME SETTING
Set the date and time. Press 

 or 
 
to select the date and time, and press 
 or 
 to change the numerical values.
Set the date in “Year/Month/Day” order.
Set the time on a...

24E

Menu Items
n MONITOR

MONITOR
Select the installation direction of the monitor.
LANDSCAPE
  ............Landscape orientation
PORTRAIT
  ...............Portrait orientation
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
STANDBY MODE
When STANDARD is selected, startup time from standby mode is reduced. Note, however that, more power will be consumed 
in standby mode.
When LOW POWER is selected, current...

25E

Menu Items
n OTHERS

SCREEN MOTION
Residual images can be reduced by moving the entire screen vertically and horizontally
.
Set the time (operating interval) until the screen moves.
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode.
When the input mode is DisplayPort, HDMI, DVI-D, or D-SUB, or when the input mode is COMPONENT or VIDEO, the settings 
of each can be configured.
LOGO SCREEN
Sets whether or not to display the...

26E

nDual screen display
You can display two screens simultaneously.
Set this function with PIP MODES of PIP/PbyP in the MULTI/
PIP menu.

PIP
Main screen 
Sub 
screen
A sub screen is displayed 
inside a main screen.
PbyP

Main  
screen  Sub 
screen

A main screen and a sub 
screen are displayed in a 
line.
PbyP2

Main screen  Sub 
screen

Displays a main screen 
which measures 1440 
pixels in the longest 
direction and a sub 
screen in a line.
*
 
The currently selected input signal is displayed on...

27E

Menu Items

Caution

•  Do not switch off the main power after setting the 
SCHEDULE.
•
  Specify the correct date and time. (See page 23.)  
SCHEDULE does not function unless the date and time are 
specified.
•
  Check regularly that the set date and time are correct.

TIPS

•  Up to 7 SCHEDULE items can be registered.
•   Setting the SCHEDULE flashes the power LED alternately 
in red and orange in standby mode.
•
  A SCHEDULE that has a large number has precedence 
over that of a small number...

28E

Menu Items

Adjustments for PC screen display
nAutomatic adjustment
When you use the D-SUB to display a PC screen for the 
first time, or when you change the setting of the PC, use the 
automatic screen adjustment.
1.
  Switch the input to D-SUB and display the adjustment 
pattern. (See the description below.)
2.
  Press 

MENU
 and use 
 or 
 to display the SCREEN 
menu.
3.
 
Press 

ENTER
 and select “AUTO”.
4.
 
Press 
ENTER
.
 
The automatic adjustment is complete in several seconds.

TIPS

•...

29E
You can return the settings to their factory-preset values and 
restrict operations.
1.  Hold 

SIZE
 down until “F” appears in the upper left 
corner of the screen.
2.
 
While “F” appears, press  

 , 
 , 
 , 
 in that 
order.

▲
▲
▲ ▲ ▲ ▲
OFF
ON
ON
FUNCTION
ALL RESET
ADJUSTMENT LOCK
OSD DISPLAY
LED
  OK…[ENTER]  BACK…[RETURN ]

3.  Select and set the items.

ALL RESET
Resets the settings to the factory default settings. 
(The settings in COMMUNICATION SETTING are 
retained.)
Press 

ENTER
 ,...

30E
Controlling the Monitor with a PC (RS-232C)

You can control this monitor from a PC via RS-232C (COM 
port) on the PC.
You can also connect multiple monitors via a daisy chain by 
using a PC. By assigning ID numbers to each monitor (see 
page 31), you can make input mode selection/adjustment or 
can check the status of a specific monitor.

TIPS

•  To control the monitor via RS-232C, set RS-232C/
LAN SELECT to RS-232C, and STANDBY MODE to 
STANDARD.
•
  You cannot use RS-232C and LAN control...