Sharp Mx5112n User Guide
Have a look at the manual Sharp Mx5112n User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 Required power supplySupplied from finisher Dimensions105 mm (W) × 518 mm (D) × 170 mm (H)(4-9/64" (W) × 20-25/64" (D) × 6-45/64" (H))115 mm (W) × 600 mm (D) × 995 mm (H)(4-39/64" (W) × 24" (D) × 39-13/16" (H)) WeightApprox. 3.5 kg (7.7 lbs.) Approx. 8.5 kg (18.7 lbs.) Required power supplySupplied from saddle finisher Dimensions115 mm (W) × 600 mm (D) × 995 mm (H)(4-39/64" (W) × 24" (D) × 39-13/16" (H))122 mm (W) × 604 mm (D) × 248 mm (H)(4-13/16" (W) × 23-25/32" (D) × 9-49/64" (H)) WeightApprox. 8.5 kg (18.7 lbs.)Approx. 3.5 kg (7.7 lbs.) Finisher (large stacker) NameFinisher (MX-FN11) Paper sizesDepends on feeder specifications Useable paperPaper weight 55 g/m2 (15 lbs.) to 256 g/m2 (68 lbs.) No. of trays2 Tray capacity (80g/m2 (21 lbs.)) Upper tray Non-stapled A3 wide (12" × 18") / A3 (11" × 17") / B4 (8-1/2" × 14") / A4R (8-1/2" × 11"R) / B5R (7-1/4" × 10-1/2"R) / A5R (5-1/2" × 8-1/2"R): 650 sheets A4 (8-1/2" × 11") / B5: 1,550 sheets Staple function A3 (11" × 17") / B4 (8-1/2" × 14") / A4R (8-1/2" × 11"R): 50 units or 650 sheets A4 (8-1/2" × 11") / B5: 100 units or 1,550 sheetsLower tray Staple function A3 wide (12" × 18") / A3 (11" × 17") / B4 (8-1/2" × 14") / A4R (8-1/2" × 11"R) / B5R (7-1/4" × 10-1/2"R): 650 sheets A5R (5-1/2" × 8-1/2"R): 1,700 sheets A4 (8-1/2" × 11") / B5: 2,450 sheets Staple function A3 (11" × 17") / B4 (8-1/2" × 14") / A4R (8-1/2" × 11"R): 50 units or 650 sheets A4 (8-1/2" × 11") / B5: 100 units or 1,550 sheets Offset output is not available for B5R (7-1/4" × 10-1/2"R) / A3 wide (12" × 18") / A5R (5-1/2" × 8-1/2"R). Max. no. of stapled sheets(90 g/m2 (24 lbs.))Max. no. of 50 sheets (A4 (8-1/2" × 11"), B5) Max. no. of 30 sheets (A3 (11" × 17"), B4 (8-1/2" × 14"), A4R (8-1/2" × 11"R)) Staple position1 bottom, 1 top, 2 middle Required power supplySupplied from this machine WeightApprox. 13 kg (28.6 lbs.) Dimensions When output paper tray is stored 440 mm (W) × 650 mm (D) × 205 mm (H) 17-39/64" (W) × 25-19/32" (D) × 8-13/64" (H))When output paper tray is extended 640 mm (W) × 650 mm (D) × 205 mm (H) (25-39/64" (W) × 25-19/32" (D) × 8-13/64" (H)) Punch module (for saddle finisher) NamePunch module for MX-FN18Punch module for MX-FN10 MX-PNX6A / MX-PNX6B, MX-PNX6C / MX-PNX6DMX-PNX5A / MX-PNX5B, MX-PNX5C / MX-PNX5D Paper size for punch moduleA3 (11" × 17") to A4 (7-1/4" × 10-1/2"R) HolesMX-PNX6A 2 holes, MX-PNX6B 3 holes,MX-PNX6C 4 holes,MX-PNX6D 4 holes (wide) MX-PNX5A 2 holes, MX-PNX5B 3 holes,MX-PNX5C 4 holes,MX-PNX5D 4 holes (wide) Punch module (for finisher) NamePunch module for MX-FNX9Punch module for MX-FN11 MX-PNX1A / MX-PNX1B, MX-PNX1C / MX-PNX1DMX-PNX6A / MX-PNX6B, MX-PNX6C / MX-PNX6D Paper size for punch moduleA3 (11" × 17") to B5R (7-1/4" × 10-1/2"R) HolesMX-PNX1A 2 holes, MX-PNX1B 3 holes,MX-PNX1C 4 holes,MX-PNX1D 4 holes (wide) MX-PNX6A 2 holes, MX-PNX6B 3 holes,MX-PNX6C 4 holes,MX-PNX6D 4 holes (wide)
22 SPECIFICATIONS Network Scanner Specifications TypeColour scanner Scan resolution (main × vertical)100 × 100 dpi, 150 × 150 dpi, 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi, 600 × 600 dpi (push scan)50 to 9,600 dpi *1 (pull scan) Scan speed (A4 (8-1/2" × 11")) B/W Colour Reversing Single Pass Feeder (RSPF)51 sheets/minute (200 × 200 dpi)(one-sided)51 sheets/minute (200 × 200 dpi)(one-sided) Duplex Single Pass Feeder (DSPF)75 sheets/minute (200 × 200 dpi)(one-sided)75 sheets/minute (200 × 200 dpi)(one-sided) When in standard mode using Sharp standard paper (A4 (8-1/2" × 1 1") size with 6% coverage) and the auto colour detector is turned off. The speed varies depending on the data volume of the original. Interface10BASE-T/100BASE-TX/1000BASE-T, USB 2.0 (during USB memory scanning) Compatible protocolsTCP/IP (IPv4/IPv6) Compatible OS *2Pull scan (TWAIN) Windows 2000, Windows XP, Windows 2000 Server, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 Output format (B/W)TIFF, PDF, PDF/A, encrypted PDF, XPS *3Compression method: decompression, G3 (MH), G4 (MMR)(Grey scale/colour)TIFF, JPEG, PDF, PDF/A, encrypted PDF, high compression PDF *4, XPS *3Compression method: JPEG (high, mid, and low compression, Emphasis black letter) DriverTWAIN compliant *1: You must decrease the scan size when increasing the resolution.*2: There are cases when a connection cannot be established. Please contact your local dealer for more information.*3: XPS (XML Paper Specification)*4: When equipped with an Enhanced compression kit (MX-EB11). TypeBuilt-in type Continuous print speedSame as continuous copy speed ResolutionData processing: 600 × 600 dpi, 1,200 × 1,200 dpiPrint: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi Page description languageStandard: PCL6 emulation, PS3 emulation *1 Compatible protocolsTCP/IP, IPv4/IPv6, IPX/SPX, NetBEUI, IPP, EtherTalk *1 Compatible OS Windows 2000, Windows XP, Windows 2000 Server, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7Macintosh (Mac OS 9.0 ~ 9.2.2, OS X 10.2.8, 10.3.9, 10.4 ~ 10.4.1 1, 10.5 ~ 10.5.8, 10.6 ~ 10.6.5)*1 Network Printer Specifications Internal fonts (options)80 fonts for PCL, 136 fonts for PS3 emulation MemoryMachine system memory and hard disk Interface10BASE-T/100BASE-TX/1000BASE-T, USB 1.1, USB 2.0 (high speed mode) *1: When equipped with a PS extension kit (MX-PK11). Fax Specifications Transmission timeApprox. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal characters, Super G3 (JBIG))Approx. 6 seconds (G3 ECM) Memory1 GB Notes Touch dial memory Max. of 2,000 entries (Including group dialling for fax, scanner, and Internet fax)Entries per group Max. of 500 entriesMass transmissions Max. of 500 recipients *1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11") size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is the transmission speed for image information only and does not include time for transmission control. The actual time needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone line conditions. NameFacsimile expansion kit (MX-FX11) Useable linesGeneral phone lines (PSTN), private branch exchange (PBX) Scanning line density Normal characters: 8 dot/mm × 3.85 chars/mmSmall characters: 8 dot/mm × 7.7 line/mmFine characters: 8 dot/mm × 15.4 line/mmHigh-definition: 16 dot/mm × 15.4 line/mm Connection speedSuper G3: 33.6 kbps, G3: 14.4 kbps Coding methodMH, MR, MMR, JBIG Connection modeSuper G3 / G3 Original paper sizes for transmissionA3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of 1,000 mm can be transmitted (one-sided and B/W only).) Registered paper sizeA3 (11" × 17") to A5 (5-1/2" × 8-1/2")
23 SUPPLIES Standard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too, are available for 7 years following the termination of production. Proper storage 1. Store the supplies in a location that is: • clean and dry, • at a stable temperature, • not exposed to direct sunlight. 2. Store paper in the wrapper and lying flat. 3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misfeeds. GENUINE SUPPLIES For best copying results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp products. Look for the Genuine Supplies label on the toner package. Storage of supplies Supply of spare parts and consumables Storing toner cartridges Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge standing on end. If stored standing on end, the toner may not distribute well even after shaking the cartridge vigorously, and will remain inside the cartridge without flowing out. Staple cartridge The finisher and saddle finisher require the following staple cartridge: MX-SCX1 (for finisher and saddle stitch finisher) Approx. 5000 per cartridge x 3 cartridges AR-SC3 (for saddle stitch of saddle stitch finisher and saddle stitch finisher (large stacker)) Approx. 2000 per cartridge x 3 cartridges AR-SC2 (for finisher (large stacker)) Approx. 5000 per cartridge x 3 cartridges
24 OTHERS Noise emission values Sound power level LWAd MX-4112NMX-5112N When MX-RP14 is installed When MX-EF10 is installedWhen MX-RP14 is installed When MX-EF10 is installed Printing mode (continuous printing)7.6 B7.4 B7.6 B7.5 B Standby mode4.8 B4.9 B4.8 B4.9 B Sound pressure level LpAm (actual measurement) MX-4112NMX-5112N When MX-RP14 is installed When MX-EF10 is installedWhen MX-RP14 is installed When MX-EF10 is installed Printing mode (continuous printing)58 dB57 dB59 dB58 dB Standby mode31 dB32 dB31 dB32 dB Noise emission values as measured according to ISO7779 are listed to the right. Emission density (measured according to RAL-UZ122: Edition Jun.2006) Measured chemicalsCondition of copierColour modeDiffusion speed Ozone When copier is in operation Colour3.0 mg/h or less Black and white1.5 mg/h or less DustColour4.0 mg/h or lessBlack and white StyreneColour1.8 mg/h or less Black and white1.0 mg/h or less BenzeneColourunder 0.05 mg/hBlack and white TVOC Colour18 mg/h or less Black and white10 mg/h or less When on standby-2.0 mg/h or less Emission of noise and chemicals
25 Forwarding all transmitted and received data to the administrator (document administration function) This function is used to forward all data transmitted and received by the machine to a specified destination (Scan to E-mail address, Scan to FTP destination, Scan to Network Folder destination, or Scan to Desktop destination). This function can be used by the administrator of the machine to archive all transmitted and received data. To configure the document administration settings, click [Application Settings] and then [Document Administration Function] in the [Settings mode] (Administrator-level access privileges are required.) • The format, exposure, and resolution settings of transmitted and received data remain in ef fect when the data is forwarded.• When forwarding is enabled for data sent in fax mode,• The [Direct TX] key does not appear in the touch panel.• Quick online transmission and dialling using the speaker cannot be used. Settings mode password The administrator password is required to change the machine’s settings mode. Settings mode can be changed from either the operation panel or using a computer web browser. After setting up the machine, refer to [Settings mode] in the Operation Guide (PC) to set a new password. The same passwords are used for logging in from the operation panel and from a web browser . If the administrator changes a password, that password will be effective when logging in from both the operational panel and a web browser. AccountPassword Userusersusers Administratoradminadmin System Administratorsysadminsysadmin Please take care not to forget newly set administrator passwords. Password for logging in from a computer There are three accounts that can log in from a web browser: “Administrator”, “System Administrator” and “User”. The factory default passwords for each account are shown on the below. Logging in as an “Administrator” or “System Administrator” will allow you to manage all the settings available via web browser. (Cut along the dotted line and keep in a safe place.) TO THE ADMINISTRATOR OF THE MACHINE
title_1 L 26 Information on Disposal for Users (private households) In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www. swico.ch or www.sens.ch. Information on Disposal for Business Users In the European Union If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. INFORMATION ON DISPOSAL
27 The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft®, Windows®, Windows® 2000, Windows® XP, Windows Server® 2003, Windows Vista®, Windows Server® 2008, Windows® 7 and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries. • PostScript is a registered trademark of Adobe Systems Incorporated. • Adobe and Flash are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries. • Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries. • Macintosh, Mac OS, AppleTalk, EtherTalk and LaserWriter are trademarks of Apple Inc., registered in the U.S. and other countries. • Netscape Navigator is a trademark of Netscape Communications Corporation. • Mozilla® and Firefox® are registered trademarks or trademarks of the Mozilla Foundation in the U.S.A. and other countries. • PCL is a registered trademark of the Hewlett-Packard Company. • IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. • Sharpdesk is a trademark of Sharp Corporation. • Sharp OSA is a trademark of Sharp Corporation. • RealVNC is a trademark of RealVNC Limited. • All other trademarks and copyrights are the property of their respective owners. Candid and Taffy are trademarks of Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. CG Omega, CG Times, Garamond Antiqua, Garamond Halbfett, Garamond Kursiv, Garamond and Halbfett Kursiv are trademarks of Monotype Imaging, Inc. and may be registered in certain jurisdictions. Albertus, Arial, Coronet, Gill Sans, Joanna and Times New Roman are trademarks of The Monotype Corporation registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Avant Garde, ITC Bookman, Lubalin Graph, Mona Lisa, Zapf Chancery and Zapf Dingbats are trademarks of International Typeface Corporation registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Clarendon, Eurostile, Helvetica, Optima, Palatino, Stempel Garamond, Times and Univers are trademarks of Heidelberger Druckmaschinen AG, which may be registered in certain jurisdictions, exclusively licenced through Linotype Library GmbH, a wholly owned subsidiary of Heidelberger Druckmaschinen AG. Apple Chancery, Chicago, Geneva, Monaco and New York are trademarks of Apple Inc. and may be registered in certain jurisdictions. HGGothicB, HGMinchoL, HGPGothicB and HGPMinchoL are trademarks of Ricoh Company, Ltd. and may be registered in some jurisdictions. Wingdings is a registered trademark of Microsoft Corporation in the United States and other countries. Marigold and Oxford are trademarks of Arthur Baker and may be registered in some jurisdictions. Antique Olive is a trademark of Marcel Olive and may be registered in certain jurisdictions. Hoefler Text is a trademark of Johnathan Hoefler and may be registered in some jurisdictions. ITC is a trademark of International Typeface Corporation registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Agfa is a trademark of the Agfa-Gevaert Group and may be registered in certain jurisdictions. Intellifont, MicroT ype and UFST are trademarks of Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Macintosh and TrueType are trademarks of Apple Inc. registered in the United States Patent and Trademark Office and other countries. PostScript is a trademark of Adobe Systems Incorporated and may be registered in some jurisdictions. HP, PCL, FontSmart and LaserJet are trademarks of Hewlett- Packard Company and may be registered in some jurisdictions. The Type 1 processor resident in Monotype Imaging’s UFST product is under licence from Electronics For Imaging, Inc. All other trademarks are the property of their respective owners. SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg TRADEMARK ACKNOWLEDGMENTS
M X - 2 6 1 0 N / M X - 3 11 0 N / M X - 3 6 1 0 N QUICK START GUIDE PRINTED IN FRANCE TINSE4954GHZ1 M X - 4 11 2 N / M X - 5 11 2 N QUICK START GUIDE