Sharp Mx5112n User Guide

11
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.
 CAUTION
The fusing unit and paper exit area are hot. When removing a misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself.
When loading paper, removing a misfeed,...

12
NAMES OF PARTS AND COMPONENTS, TURNING ON THE POWER
This machine has a main power switch, found at the 
bottom left after the front cover is opened, and a power 
button (), located on the operation panel.
CAUTION
• When turning off the power, make sure that the indicators on the 
operation panel turn off as well.
• If the machine suddenly turns off, such as in the event of a power failure, 
turn the machine on again, and then turn off the machine following the 
correct procedure for turning off the...

13
Double-tapLightly strike the touch panel two times. 
FlickFlick (quickly swipe with the finger) to scroll 
the preview image.
TapTouch and then quickly release the finger.
Used to select keys, tabs, checkboxes, etc.
Long-touchTouch a key and keep the finger on the key for 
a short time.
SlideSlide the finger on the scroll bar to move up or 
down through a long list.
DragDrag (slide the finger in the desired direction) 
to rotate or delete original pages displayed as 
a preview.
OPERATING THE TOUCH...

14
OVERVIEW OF COPY OPERATION
Step 1Select a functionStep 2Place the original
Select the Copy icon.
Tap
Select the automatic document feeder or the document glass according to the type of original.
Tap
Print 1 set of copies
Place the original on the document glass
Lift open
Placing a thick book
Align to corner
Place image-side down
Insert all the wayDo not pass this line
Align the edges
Place the original in the automatic document feeder
Adjust to original size
Place image-side up
MX-4112N / MX-5112N 

15
Print
Scan the original
Enter the number of prints and start printing.
Tap
Scan another original
Step 3ScanStep 4Confirming while viewing the preview
Tap
Step 5Start
Tap
Drag
Confirm the results of the scan and any edits or settings.
ConfirmationFace up/down, orientation, 
missing pages, folded pages
Output settingsEditing
Page editing, deleting, etc.
Document filing
The scanned original and the settings are saved on the 
hard disk and can be used again. 

16
Transmission
Storing
For functions other than copy.OVERVIEW OF OTHER OPERATIONS
E-mail
Fax
Tap
Tap
HDD file 
retrieve
Tap
Step 1Step 5Step 3ScanStartSelect a 
function
Place the 
originalStep 4ConfirmationStep 2
Scan and store the file
Select the folder
Place the original in the automatic 
document feeder
Insert all the wayDo not pass this line
Align the edges
Upward
Adjust to original size
Align to corner
Lift openDownward
Placing a thick book
Confirmation
Face up/downOrientationMissing pagesFolded...

17
• Do not dispose of used toner cartridges. Place them in a plastic bag and keep them.  The technician will collect the used toner cartridges when performing maintenance.
• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will 
appear in the display while the key is touched.
• When the percentage falls to “25-0%”, obtain a new toner cartridge and keep it ready for replacement.
•...

18
Basic specifications / copier specifications
NameMX-4112N / MX-5112N
TypeDesktop
ColourFull colour
Copier systemLaser electrostatic copier
Scanning 
resolution
Scan (B/W): 600 × 600 dpi, 600 × 400 dpi
Scan (full colour): 600 × 600 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
GradationScan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper 
sizesMax. A3 (11" × 17”) for sheets and bound documents
Copy sizes
A3 wide (12" × 18") to A5R, 5-1/2" ×...

19
Automatic document feeder
NameMX-4112N
Reversing Single Pass Feeder (MX-RP14)
MX-5112N
Duplex Single Pass Feeder (MX-EF10)
Document feeder typesReversing Single Pass Feeder (RSPF)Duplex Single Pass Feeder (DSPF)
Original paper sizesA3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Original paper types
Paper weightThin paper 35 g/m2 (9 lbs.) to 49 g/m2 (13 lbs.)
Plain paper 50 g/m2 (13 lbs.) to 128 g/m2 (34 lbs.)
Two-sided50 g/m2 (13 lbs.) to 105 g/m2 (28 lbs.)50 g/m2 (13 lbs.) to 128 g/m2 (34...

20
SPECIFICATIONS
Saddle stitch finisher
NameSaddle Stitch Finisher (large stacker)
Paper sizesDepends on feeder specifications
Useable paperPaper weight  55 g/m2 (15 lbs.) to 256 g/m2 (68 lbs.)
No. of trays2
Tray capacity (80 g/m2 (21 lbs.))
Upper tray Non-stapled     A3 wide (12" × 18") / A3 (11" × 17") / B4 (8-1/2" × 14") / A4R (8-1/2" × 11"R) / B5R (7-1/4" × 10-1/2"R): 650 sheets A5R (5-1/2" × 8-1/2"R) / A4 (8-1/2" × 11") /  B5: 1,550 sheets...