Sharp MX M453N User Manual

2-99
COPIER
Contents
4
Touch the [Back] key.
You will return to the screen of step 2.
To copy using a stored text string, continue from step 2 of 
PRINTING TEXT ON COPIES (Text) (page 2-96).
No.01 AAA AAA
No.03 CCC CCCNo.04
No.02 BBB BBB
No.05
No.07No.08
No.09No.10
No.06
13
105
Store/Delete
Stamp
Text
105
Store/Delete
Stamp
TextBack
Downloaded From ManualsPrinter.com Manuals 

2-100
COPIER
Contents
CHECKING THE STAMP LAYOUT (Layout)
After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items.
1
Touch the [Layout] key.
The [Layout] key can only be touched when stamp items have been selected.
2
If the layout is correct, touch the [OK] 
key.
Touch the key of the stamp item that you want to delete or 
whose position you want to change.
A maximum of 14 characters appear in each key.
3
To change the position of the item,...

2-101
COPIER
Contents
4
Touch the key of the desired destination 
position.
The touched position key is highlighted and the print position 
changes.
The keys that show the print positions will appear as follows 
depending on the state of the settings.
The above key is the top left key. The appearance of each key 
varies depending on the position of the key. 
If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move 
either one of the items to an...

2-102
COPIER
Contents
ADDING A WATERMARK TO A COPY (Watermark)
When making a copy, specific text can be added to the copy as a watermark. The density, angle, and pages (first page 
only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper.
Printing CONFIDENTIAL on the paper
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the watermark.
The angle of a watermark can be selected in the range +90...

2-103
COPIER
Contents
3
Touch the [Exposure] key and set the 
density.
If you wish to darken, touch the   key. If you wish to 
lighten, touch the   key.
When you have finished selecting the settings, touch the [OK] 
key.
4
Touch the   keys to set the angle of 
the watermark.
An angle from +90 degrees to -90 degrees in increments of 45 
degrees can be selected.
5
Select the pages that the watermark will 
be printed on and touch the [OK] key.
Select printing on the first page only, or printing on all...

2-104
COPIER
Contents
[Image Edit] KEY
When the [Image Edit] key is touched in the 2nd special modes menu screen, the image edit menu screen opens.
Image edit menu screen
(1) [Photo Repeat] key
☞REPEATING PHOTOS ON A COPY (Photo Repeat) 
(page 2-105)
(2) [Multi-Page Enlargement] key
☞CREATING A LARGE POSTER (Multi-Page 
Enlargement) (page 2-107)
(3) [Mirror Image] key
☞REVERSING THE IMAGE (Mirror Image) (page 
2-110)(4) [A3 Full Bleed] key ([11x17 Full Bleed] key)
☞COPYING A3 (11 x 17) ORIGINALS WITH NO...

2-105
COPIER
Contents
REPEATING PHOTOS ON A COPY (Photo Repeat)
Photo Repeat is used to create repeated images of a photo-size original (130 mm x 90 mm size, 100 mm x 150 mm 
size, 70 mm x 100 mm size, 65 mm x 70 mm size or 57 mm x 100mm size (3 x 5 size, 5 x 7 size, 2-1/2 x 4 size, 
2-1/2 x 2-1/2 size or 2-1/8 x 3-5/8 size)) on a single sheet of copy paper as shown below. Up to 24 images (when the 
image is 65 mm x 70 mm size (2-1/2 x 2-1/2 size)) can be repeated on a single sheet of paper.
Original...

2-106
COPIER
Contents
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Photo Repeat] key.
☞[Image Edit] KEY (page 2-104)
3
Select Photo Repeat settings.
(1) Touch the key showing the original type 
and paper size combination that you want 
to use.
Touch the   keys to switch through the screens and 
touch the desired repeat type key (A4 or A3 (8-1/2 x 11 
or 11 x 17)).
(2) Touch the [OK] key....

2-107
COPIER
Contents
CREATING A LARGE POSTER (Multi-Page 
Enlargement)
This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper.
1
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Multi-Page Enlargement] key.
☞[Image Edit] KEY (page 2-104)
Original
(A4 (8-1/2 x 11) size)
Copy (enlarged image on 8 
sheets of A3 (11 x 17) paper)...

2-108
COPIER
Contents
2
* The size that is twice A0 size.
Set the enlargement size and the original 
size.
(1) Select the size system that you wish to use 
for multi-page enlargement.
Touch the   keys to display the screen that shows 
the desired group of sizes.
 1st screen: A system
 2nd screen: B system
 3rd screen: Inch system
(2) Select the enlargement size.
(3) Select the size of the original to be used.
A suitable original placement orientation (A) and the 
number of sheets of paper required for...