Sharp MX M452N User Manual

MODEL: MX-M282NMX-M362N
MX-M452N
MX-M502N
DIGITAL MULTIFUNCTIONAL SYSTEM
START GUIDE
Keep this manual close at hand for reference whenever needed.
Downloaded From ManualsPrinter.com Manuals 

EMC (this machine and peripheral devices)
Caution!
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be 
required to take adequate measures.
This machine contains the...

1
For the users of the fax function
FAX interface cable and Line cable:
These special accessories must be used with the device.
SOFTWARE LICENCE
The SOFTWARE LICENCE will appear when you install the software from the CD-ROM. By using all or any portion of 
the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE 
LICENCE.
The products that meet the ENERGY STAR®  guidelines carry the logo shown above.
The products without the logo may not meet the ENERGY...

2
Contents
CAUTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Symbols in this manual  . . . . . . . . . . . . . . . . . . . . . 3
Power notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation notes  . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About consumables  . . . . . . . . . . . . . . . . . . . . . . . . 5
Handling precautions . . . . . . . . . . . . . . . . . . . . . . . 6
Laser information . . . . . . . . . . . . . . . . . . . . . . . . . ....

3
CAUTIONS
Symbols in this manual
Power notes
To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as 
explained below. Be sure you understand the meaning of the symbols when reading the manual.
Indicates a risk of death or serious injury.
Indicates a risk of human injury or property dama ge.
WARNING
CAUTION
Symbol Meaning
PINCH POINT
KEEP CLEAR
Symbol
CAUTION!
HOT
Meaning
DO NOT
DISASSEMBLE
Symbol
Meaning
PROHIBITED ACTIONSSymbolMeaning
MANDATORY...

4
CAUTIONS
Installation notes
Adjuster
Lock Release
CAUTION
Do not install the machine on an unstable or 
slanted surface. Install the machine on a surface 
that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling. 
If peripheral devices are to be installed, do not 
install on an uneven floor, slanted surface, or 
otherwise unstable surface. Danger of slippage, 
falling, and toppling. Install the product on a flat, 
stable surface that can withstand the weight...

5
CAUTIONS
Installation notes (continued)
About consumables
The machine includes a built-in hard drive. Do not subject the machine to shock or vibration. In particular, never 
move the machine while the power is on.
 The machine should be installed near an accessible power outlet for easy connection.
 Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the 
same outlet, the light may flicker.
45cm
(17-23/32)
30cm
(11-13/16)
30cm...

6
CAUTIONS
Handling precautions
WARNING
Do not place a container of water or other liquid, 
or a metal object that might fall inside, on the 
machine.If the liquid spills or the object 
falls into the machine, fire or 
electrical shock may result. If you notice smoke, a strange odor, or other 
abnormality, do not use the machine.
If used in this condition, fire or 
electrical shock may result.
Immediately switch off the main 
power and remove the power 
plug from the power outlet. 
Contact your dealer or...

7
CAUTIONS
Laser information
Wave length790 nm ± 10 nm
Pulse times
(North America and Europe) MX-M282N/MX-M362N: 11.9 µs ± 33.0 ns /7 mm
MX-M452N/MX-M502N: 9.4 µs ± 25.6 ns /7 mm
Output power Max 0.6 mW (LD1+ LD2)
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation  exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)
SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and...

8
OPERATION MANUALS AND HOW TO USE THEM
Printed manuals and a manual in PDF format are provided with the machine.
Printed manuals
This section explains precautions to ensure safe usage, part names and functions, basic software installation, how to 
resolve paper jams, and daily maintenance procedures. Refer to the PDF instruction manual for instructions on how to 
use the machine.
Manuals in PDF format
The explanation of the functions that can be used on the machine are provided in the Operation Guide in...