Home > Sharp > Printer > Sharp MX 2300N User Manual

Sharp MX 2300N User Manual

Here you can view all the pages of manual Sharp MX 2300N User Manual. The Sharp manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 61

60
REPLACING THE TONER CARTRIDGES
When toner runs lower than 25%, ( ) appears in the display. When toner runs even lower, (  Toner 
supply is low.) appears. It is recommended that you keep a set of new toner cartridges so that you can replace them 
quickly when toner runs out.
1
Open the front cover.
Locations of colour toner cartridges
(A): Yellow (B): Magenta
(C): Cyan (D): Black
Ready to scan for copy.
(                 Toner supply is low.)
Change the toner cartridge.
(                ) Ready to scan...

Page 62

61
2
Pull the toner cartridge toward you.
Raise the toner cartridge lever and gently pull the toner 
cartridge horizontally toward you.
When pulling out the toner cartridge, pull it out gently. If the 
cartridge is pulled out abruptly, toner may spill out.
Example: Replacing the yellow toner cartridgeHold the toner cartridge with both hands as shown and pull it 
out of the machine.
3
Remove a new toner cartridge from its 
package and shake it horizontally five or 
six times.
When shaking the toner...

Page 63

62
7
Close the front cover.
After the toner cartridge is replaced, the machine automatically 
enters image adjustment mode.
Caution
Do not throw a toner cartridge into a fire. Toner may fly and cause burns.
Store toner cartridges out of the reach of small children.
If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
 If any...

Page 64

63
REPLACING THE WASTE TONER BOX
The waste toner box collects residual toner that is produced during printing. When the used toner box is full, the display 
will show Replace used toner container.. Follow the procedure below to replace the used toner box.
1
Open the front cover.
2
Release the used waste toner box.
Press the waste toner box release button.
The waste toner box will fall forw ard as shown at left. Wait until 
the box comes to a stop.
Keep the replacement cleaner that has not been used....

Page 65

64
4
Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the 
box.
Do not point the holes down as used toner will spill out.
5
Remove the seals around the holes.
Grasp the edge of each seal and pull it out toward you. 
There are 5 seals. Remove all of the seals.
6
Plug the holes.
Grasp the edge of each black seal and insert it into a hole in the 
box to plug the hole. 
 There are 5 seals. Plug all of the holes.
 Do not discard the waste toner box. Place it in a...

Page 66

65
8
Push the waste toner box into the 
machine.
Push the box in until it clicks into place.
9
Close the front cover.
Caution
Do not throw a waste toner box into a fire. Toner may fly and cause burns.
Store waste toner box out of the reach of small children.
When replacing the waste toner box, be aware that it may soil your clothes or the place where you remove it.
Downloaded From ManualsPrinter.com Manuals 

Page 67

66
This chapter explains the text entry screen.
FUNCTIONS OF THE MAIN KEYS
6
ENTERING TEXT
KeyDescription
   
   This changes the text entry screen from the lower case screen to the upper case screen. The upper case screen will 
continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The [Caps] key is 
convenient when you wish to enter all capital letters. (This key will vary depending on your country or region.)
 
This key temporarily changes the keys in the text...

Page 68

67
CHANGING THE ENTRY MODE
Touch the [Mode] key to temporarily change the key layout of the keyboard to a different language. Select the desired 
key layout from the following keys.
[Characters] key
Touch this key to select character entry mode.
[Symbols] key
Touch this key to select symbol entry mode. Symbol mode is used to enter symbols and accented letters.
[Other Language] key
Touch this key to temporarily change the key layout of character entry mode to a different language. Select the key 
layout...

Page 69

MX4500-EX-USR-Z1
Users GuideMX-3500N
MX-3501N
MX-4500N
MX-4501N MX-2300G
MX-2300N
MX-2700G
MX-2700N MODEL:
Downloaded From ManualsPrinter.com Manuals 
Start reading Sharp MX 2300N User Manual

Related Manuals for Sharp MX 2300N User Manual

All Sharp manuals