Sharp LCD Monitor PN V601 User Manual

PN-V601
LCD MONITOR
OPERATION GUIDE 

2E
This guide contains instructions regarding operation, settings, and simi\
lar details.
For instructions regarding connection and installation, refer to the inc\
luded Operation Manual.
Manual Scope
-  Microsoft, Windows and Internet Explorer are registered trademarks of Mi\
crosoft Corporation.
-   HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC.
-    Adobe, Acrobat, and Reader are either registered trademarks or trademarks of...

3E
nFront view
1
23 45
6789
The rear buttons if seen  
from the front
1. LCD panel
2. INPUT button
3. MENU button
4. VOL -/Cursor control (
) button
5. VOL +/Cursor control (
) button
6. BRIGHT -/Cursor control (
) button
7. BRIGHT +/Cursor control (
) button
8. Power button
9. Power LED
Part Names
n Rear view
When the PN-ZB02 
(optional) is attached 17
15
28
27
26
25 2921
23
16
19 20
18
2224
13
14
32
31
30 34
33
10
12 11
98 7654 32
 
10. Fan
 
11.  Vents
 
12.  Handles
 
13.  Expansion terminal cover...

E4
Part Names
n Remote control unit 
 
(Supplied with the PN-ZR01 (optional))
1
2
3
4
5
6
7 129
10 11 8 
1.  Signal transmitter
  2.  POWER button
  3.  MUTE button
  4.  VOL +/Cursor control (
) button
  5.  BRIGHT -/Cursor control (
) button
  6.  DISPLAY button
  7.  MODE button
  8.  INPUT button
  9.  MENU button
 
10.  BRIGHT +/Cursor control (
) button
 
11.  VOL -/Cursor control (
) button
 
12.  SIZE button
nRemote control sensor box  
(Supplied with the PN-ZR01 (optional))
1
2
3 4 
1....

5E
Basic Operation
When performing operation of multiple monitors with the 
remote control unit, first set the remote control unit to the 
appropriate remote control mode (see page 7).
1
2 3
4
5
6
7
8
TIPS
• 
You can perform operation of the monitor with the rear 
buttons. Utilize the buttons belonging to the monitor that 
you would like to operate.
•  Operation by using the buttons on the rear side of the 
product will perform the same functions.
Rear side buttons
Remote control 
unit buttons
  This...

E6
Basic Operation
n Switching the screen size
Even when the screen size is changed, the display may remain the same de\
pending on the input signal.
WIDEPC input
Displays image so it fills the entire screen.
AV input An image with a 4:3 aspect ratio is stretched to fill the entire 
screen.
ZOOM 1
PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen 
without changing the aspect ratio. The edges of the image may be 
cut off.
AV input
ZOOM 2
PC input Use this size if ZOOM 1 cuts...

7E
Remote Control Mode 
With the remote control unit it’s possible to perform operation 
of...•  The primary monitor
•  Monitors with a specified ID No.
•  All primary/secondary monitors
It’s necessary to specify which type of operation will be 
performed in advance.
1.  If using the remote control unit, press 
MODE for approx 5 
seconds. 
If using the monitor buttons, hold both 
 and  at 
the same time on the primary.
▲▲THIS MONITOR ONLY
REMOTE CONTROL MODE
MODE
OK CANCEL
Operate this monitor.
2. 
Press...

8E
Menu Items
Displaying the menu screen
Video and audio adjustment and settings of various functions 
are enabled. This section describes how to use the menu 
items. See pages 9 to 12 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items 
are being displayed. Doing so may initialize the settings.
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
1. 
Press MENU to display the menu screen.
1366x768
V: 60 Hz    H: 47.7 kHz
AUTO 
CLOCK 
PHASE...

E9
Menu item details
The menu will differ depending on the input mode.
nSCREEN
AUTO (PC D-SUB/PC RGB)
The CLOCK, PHASE, H-POS, and V-POS are automatically 
adjusted.
Pressing  
 
performs adjustment.
Use this automatic adjustment when you use the PC D-sub 
input terminal or PC RGB input terminals to display a PC 
screen for the first time or when you change the setting of 
the PC. (See page 15.)
CLOCK (PC D-SUB/PC RGB)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is...

E10
nAUDIO
TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press MENU.
nSETUP
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
SCREEN MOTION
Residual images are reduced by moving the screen.
PATTERN1...