Sharp Lc42sb48uta Manual

 11
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control se\
nsor on the TV. Objects between the remote control unit and the remote control sensor ma\
y prevent proper operation.
POWER indicator
30º (5m)
Horizontal & Vertical
(8 m)
0º
Remote contr
ol sensor
45º (4m)
Horizontal only
■  Cautions regarding the remote control unit
Do not expose the remote control unit • to shock. In addition, do not expose the remote control unit to liquids, and do not place in...

12

Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a b\
rief explanation of the types of connections that are used for a coaxial cable. If your outd\
oor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenn\
a terminal at the rear of the TV set.
A 75-ohm system is generally a round 1.cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).
A 300-ohm system is a at “twin-lead” 2.cable that...

 13
Installing Batteries in the Remote Control Unit
CAUTION
Improper use of batteries can result in chemical leakage or explosion. B\
e sure to follow the instructions below.Do not mix batteries of different types. Different types of batteries ha\
ve different • characteristics.
Do not mix old and new batteries. Mixing old and new batteries can short\
en the life of • new batteries or cause chemical leakage in old batteries.
Remove batteries as soon as they are worn out. Chemicals that leak from \...

 14
Contents
Dimensional DrawingsThe dimensional drawings for the LCD TV set are shown on the inside back\
 cover.• 
IMPORTANT INFORMATION ........................................................................\
.............. 1TRADEMARKS ........................................................................\
..................................... 2IMPORTANT SAFETY INSTRUCTIONS ...................................................................... 3QUICK REFERENCE...

 15
Remote control sensorPOWER indicator
(See page 19.)
Part Names
TV (Front)
TV (Side/Rear)
*1
*3
*1 *2
INPUT 1
(AV IN)
USB
INPUT 8
(HDMI)
Earphone 
Output
INPUT 5, 6, 7
(HDMI) Antenna/Cable in
RS-232C
IOIOI
INPUT 2, 3 (COMPONENT)
AUDIO OUT
INPUT 4
(PC IN)
Channel buttons
(CH    /    )
MENU button
INPUT button
POWER button Volume buttons
(VOL +/-)
AC INPUT terminal
*1: See pages 12, 17, and 18 for external equipment connection.*2: See page 19 and 28 for button operations.*3: See page 10 for connecting...

 16
Remote Control Unit
1
2
3
14
15
16
17
18
2022
19
21
4
5
6
7
8
10
12
13 9
11
16
Select
EnterEnter
23NO FUNCTION
Part Names
When using the remote control unit, • point it at the TV.
POWER: 1 Switch the power on or enters standby mode. (See page 19.)
MUTE: 2 Mute the sound. (See page 21.)
INPUT: 3 Select a TV input source.  (See page 21.)
0–9: 4 Set the channel.
• (DOT): 5 (See page 21.)
DISPLAY: 6 Display the current channel  (or input source) information on the screen.
VOL 7 k/l : Set the volume. (See...

 17
Connecting to External Equipment
You can connect many types of external equipment to your TV like a Blu-r\
ay disc player, HD-DVD player, DVD player, VCR, HDMI equipment, game console or camcorde\
r. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV. (See page 21.)
CAUTION
 To protect equipment, always turn off the TV before connecting any exter\
nal •equipment. Please read the relevant operation manual (Blu-ray disc player, etc.) \...

 18
Connecting to External Equipment
Terminal on the TVCableTerminal on PC
INPUT 4
(PC IN)
Connecting a PC
RGB cable (commercially available)
ø 3.5 mm stereo minijack cable (commercially available)
INPUT 5, 6, 7, 8 HDMI-certified cable (commercially available)
The HDMI terminals only support digital signal.• 
Refer to page 42 for a list of PC signals compatible with the TV.• 
 
When using an HDMI-DVI conversion cable, input the audio signal to AUDIO\
 terminal of • PC IN. 
To enjoy the 1080p display...

 19
Turning On/Off the Power
Initial Setup
POWER
Watching TV
When you turn on the TV for the first time, the Initial Setup will guide you through the setup process. Perform the following steps before you press POWER on the remote control unit.
Insert the batteries into the remote 1. control unit. (See page 13.)
Connect the antenna cable to the TV. 2. (See page 12.)
Plug in the AC cord to the AC outlet. 3. (See page 10.)
Select
Enter
Initial Setup1. 
 The Initial Setup screen display at •the first use....

 20
Watching TV
3. Location setting
 Press •a/b to select “Home” or “Store” and press d to the next step.
Please select your location: 
Home mode is destined for home 
user.
Store mode is designed for retail 
store.
Initial SetupLocation
Home
Store
Exit
EXITBack Select Next
4. Time Zone setting
 Press •a/b to select your current location for time zone.
Please select your time zone:
Initial SetupTime Zone
Eastem Time
Central Time Indiana
Mountain Time Pacific Time Arizona
Hawaii Alaska
Exit
EXITBack...