Sharp Lc32lb261u User Guide

36
LC-32LB261U Sharp 32" LED TV
Using the remote 
control
Installing remote control batteries
1While pressing the release latch on the back of the 
remote control, lift the battery compartment 
cover off of the remote control.
2Insert two AAA batteries into the battery 
compartment. Make sure that you match the + 
and – symbols on the batteries with the + and – 
symbols in the battery compartment.
3Replace the battery compartment cover.
Aiming the remote control
• Point the remote control towards the...

37
 LC-32LB261U Sharp 32" LED TV
Turning on your TV for 
the first time
The first time you turn on your TV, the EZ SETUP 
wizard opens. The wizard guides you through setting 
up basic settings including the menu language, time 
setting, picture mode, TV signal source, and channel 
list.
1Make sure that you have:
• Installed the remote control batteries. (See page 
36 for details.)
• Connected an antenna, cable TV, or satellite TV. 
(See page 13 through 18 for details.)
• Connected the power cord....

38
LC-32LB261U Sharp 32" LED TV
13Press S or T to highlight Antenna, Cable, or 
Satellite Box, then press ENTER. 
AIf you select Antenna, your TV scans for 
available channels. The scan may take several 
minutes.BIf you select Cable, a message asks if you 
have a cable box:
• Select No, then press ENTER if no cable box 
is connected. Your TV scans for available 
channels. The scan may take several minutes.
• Select Ye s, then press ENTER if a cable box is 
connected. A message asks how you 
connected...

39
 LC-32LB261U Sharp 32" LED TV
CIf you select Satellite Box, a message asks 
how you connected the satellite box to your 
TV:
•Select HDMI, Component, or AV, then press 
ENTER if you connected a satellite box to 
your TV using one of these cables. Read the 
message, then press ENTER to close the 
wizard.
•Select Coaxial, then press ENTER if you 
connected a satellite box to your TV using a 
coaxial cable. Read the message, then press 
ENTER to start the channel scan ( VHF 
channels only).
14To...

40
LC-32LB261U Sharp 32" LED TV
On-screen menu overview
PICTURE menu (TV mode)
SOUND menu (TV mode)
CHANNELS menu (TV mode)SETUP menu (TV mode)
PHOTOS menu (USB mode)
Navigating the menus
Notes
• Depending on the signal source selected, you may 
see different options on your screen.
• Menu items that are not selectable are grayed out.
• Menus in this manual are described in TV mode, 
unless otherwise indicated.
• The screens shown in this manual are for 
explanation purposes and may vary from the...

41
 LC-32LB261U Sharp 32" LED TV
Selecting a channel
• Press CH or CH to go to the next or previous 
channel on the memorized channel list.
• Press the number buttons to enter the channel 
number you want, then wait for the channel to 
change or press ENTER to immediately change the 
channel.
• To select a digital sub-channel, press the number 
buttons to enter the main digital channel, press 
(sub-channel), then press the number button for 
the sub-channel. Wait for the channel to change, or 
press...

42
LC-32LB261U Sharp 32" LED TV
Switching back to the Roku Streaming Stick
1Press INPUT, then press S or T to select 
HDMI 2 (Roku).
OR
Press MENU, then press 
W or X to highlight 
Streaming.
2Press ENTER to access your Roku Streaming 
Stick™. Your stick’s menu opens. 
3Use 
S T W X and ENTER to navigate on your Roku 
Streaming Stick™.
Using an MHL-enabled 
device 
You can connect your MHL-enabled device, such as
a cell phone, and view your device’s screen on your
TV.
Connecting and using
1Connect an...

43
 LC-32LB261U Sharp 32" LED TV
Switching back to the connected device
1Press INPUT, then press S or T to select 
HDMI 2 (MHL/ACC).
OR
Press MENU, then press 
W or X to highlight 
MHL/ACC.
2Press ENTER to access your MHL-enabled device. 
Your device’s menu opens. 
3Use 
S T W X and ENTER to navigate on your 
device.
Using CEC Control
CEC Control lets you control HDMI CEC-compatible 
devices connec ted to the HD MI jac ks on your  T V usi ng  
the remote control that came with your TV. To use CEC...

44
LC-32LB261U Sharp 32" LED TV
Turning Device Auto Power Off on or off
When CEC Control is set to On, Device Auto Power 
Off automatically turns off HDMI CEC devices when 
you turn off your T V.
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETUP, then press T or 
ENTER. The SETUP menu opens.
3Press 
S or T to highlight CEC, then press ENTER. 
The SETUP · CEC menu opens.
4Make sure that the CEC Control option is turned 
on. See “Turning CEC Control on or off” on 
page43.
5On the...

45
 LC-32LB261U Sharp 32" LED TV
Turning Audio Return Channel on or off
When CEC Control is turned on and you have 
connected an audio receiver to your TV, turning on 
Audio Return Channel lets you use your TV’s remote 
control to control the volume on the audio receiver.
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETUP, then press T or 
ENTER. The SETUP menu opens.
3Press 
S or T to highlight CEC, then press ENTER. 
The SETUP · CEC menu opens.
4Make sure that the CEC Control...