Sharp LC-90LE745U HDTV Owners Guide

							79
6Enter your "Full name", "Skype Name", "Password", 
and "Email" address.
7Select "Create Account", and then press ENTER.
Sign In to Skype
8Enter your registered "Skype Name" and "Password".
9Select "Sign in", and then press ENTER.
•  If you have signed in on the TV before:
1 Select the "Skype Name", and then press ENTER.
2 Select your Skype name from the recently used 
accounts, and then press ENTER.
•  By ticking the "Sign me in when Skype starts", you can 
enable automatic sign in.
Using Skype™
Skype Main Menu
Claire
1 Your Skype Name, online status*, Skype credit and 
profi le  picture
2 The picture from your communication camera
3 Notifi cation area
4 Menu items: "Contacts", "History", "Profi le" and 
"Settings"
* Status icons
Icon Status
Online
Away
Do not disturb
Invisible/Offl ine
Adding Your Friends to Your Contact list
•  If this is not your fi rst time using Skype, your previously 
registered contacts will appear.
1Select "Contacts" on the Skype main menu, and 
then press ENTER.
2PressD (add contact).
3Enter the Skype name, E-mail address, or full name 
of the person you want to add.
4Select "Search", and then press ENTER.
5Select the person you want to add from the search 
result, and then press ENTER.
6With the software keyboard, enter a message to 
introduce yourself and send it with "Done".
• " Contact requests" will be sent to the person added to 
the Contact list.
Selecting a Contact and Starting a Video Call
1Select "Contacts" in the Skype main menu, and 
then press ENTER.
2Select a contact who is online from your list of 
Contacts, and then press ENTER.
Using the Internet
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							80
3Select "Video call" on the Contacts Option menu, 
and then press ENTER.
• If  you want to make a voice call, select "Call".
Contact Option menuVideo call: Make a video call.
Call:Make a voice call.
View profi le: View the selected contact's profi le.
Rename: Rename the selected person.
Block/Unblock: Block/Unblock selected person from 
contacting you.
Send Voicemail: Send a voicemail message to the 
selected contact. (Voicemail is a paid service. Visit the 
following website for more information: http://www.
skype.com/)
Remove: Remove the person from your Contacts list.
■Video Call Screen (Normal View)
Claire
1 Video call menu*
2 The picture from contact person's communication 
camera
3 The picture from your communication camera
4 Video quality indicator
  (Depending on the network environment)
* Video call menu
Once a video call has started, the following items will 
be available.
• End call
• Hold/Resume
• Dial pad
• Mute/Unmute (microphone)
•  Stop my video/Start my video
• Full view
•  To change the speaker volume of the unit, press VOL
k/
l
orMUTE on the remote control.
Receiving Skype Calls
You can receive Skype calls even while watching a TV 
program or video.
When you receive an incoming call, a window will 
appear in the bottom right-hand corner of the screen. 
Select "Video", "Audio", "Decline" or "Hide", and then 
pressENTER.
Video
Decline Incoming call
Audio
Hide Kevin
•  You cannot receive calls when you are signed out of Skype, 
when the TV is in standby mode, or when the power is off.
•  Skype on the TV cannot be activated while you are using 
a certain specifi c function. In that case, stop using the 
function.
Other Useful Functions
On the Skype main menu, you can manage and adjust 
your call history.
■
History• Shows y our call history.
• Allows y ou to call a person displayed in Call History and to 
accept or block contact requests.
•  If the time displayed in History is incorrect, make the 
necessary adjustments in Initial Setup > EZ Setup > 
Location & Time.
■Profi leSet up the following items.Edit profi le: Edit your profi le.
Online status: Change your online status.
■SettingsSet up the following items.General settings: Select whether you want to sign in 
automatically when you enter Skype.
Change password: Change your password.
Video settings: Adjust the privacy settings for video.
Privacy settings: Choose whom you wish to receive 
calls from.
Block contacts: Set the person who you do not want to 
hear.
Using the Internet
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							81
Using the Internet
The following will be displayed when you get access to Skype for the fi rst time.
Terms of Use
PLEASE READ CAREFULLY
1.  All Skype features are offered by Skype under the terms of the Skype end user license agreement .
2.  You shall not promote, include, display, provide, or make available any content which: 
(a) may be considered: sexually explicit (including the use of sexual terms, images and nudity);vulgar, profane, 
offensive or obscene; defamatory, libellous, slanderous; religiously or racially offensive or otherwise 
promoting hate towards individuals or groups; promoting terrorist or other criminal or illegal activities; 
promoting gambling, alcohol, tobacco, fi rearms or ammunition; otherwise unlawful; or 
(b) infringes anyone else's intellectual property rights, other proprietary rights or rights of privacy; You 
undertake and represent that you own or have suffi cient permission to use all content that you include in, 
display through, provide, or make available through our product.
3.  You are solely responsible for any content that you upload, submit, post, transmit or display through the 
Skype on our product -(“ use” or “used”) and that SHARP is not responsible to you or any third party for any 
content that is used by you or any other Skype user.
4.  You will not reverse engineer or attempt to derive the source code for any Skype software included in our 
product, or remove or separate from our product , or copy, redistribute or otherwise provide to any third 
parties any Skype software that is included in our product.
5.  The Skype features do not support any emergency calls.
6.  SHARP will not guarantee that you cannot utilize the Skype features under the following conditions
  —  In case the malfunction caused by the Skype server happens
  —  In case the malfunction of the network happens
7.  IN NO EVENT SHALL SHARP AND/OR ITS AFFILIATES BE LIABLE, WHETHER IN CONTRACT, WARRANTY, 
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR ANY OTHER FORM OF LIABILITY, FOR:
  —  SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION ANY LOSS OF OR    
  CORRUPTION TO DATA, INTERRUPTION, COMPUTER FAILURE OR PECUNIARY LOSS) ARISING OUT  
  OF THE USE OR INABILITY TO USE THE SKYPE; AND
  —  ANY LOSS OF INCOME, BUSINESS OR PROFITS (WHETHER DIRECT OR INDIRECT) ARISING OUT OF  
  THE USE OR INABILITY TO USE THE SKYPE;
  — ANY LOSS OR DAMAGE WHICH MAY BE INCURRED BY YOU AS A RESULT OF;


W ANY DISRUPTIONS OR DELAYS IN ANY COMMUNICATION WHEN USING THE SKYPE
8.  These Terms of Use supplement and do not replace, any terms, conditions or disclaimers, which were 
provided with your purchase of the product. All such terms, conditions and disclaimers remain in full force 
and effect.
9.  Your use of the Skype on our product constitutes your agreement to be bound by these Terms of Use. You 
understand and agree that SHARP will treat your use of the Skype on our product as acceptance of the 
Terms of Use from that point onwards.
You agree that the use of the Skype on our product is at your own risk.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							82
Examples of Application Logos
Using the Internet
When you access the Internet application for the fi rst time, the following appears.
•  This message is available only in English.
DISCLAIMERS
•  This SHARP device facilitates the access to content and services provided by third parties. The content and 
services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of 
such third party content and services must be in accordance with any authorization or terms of use provided 
by such content or service provider. SHARP shall not be liable to you or any third party for your failure to 
abide by such authorization or terms of use. Unless otherwise specifi cally authorized by the applicable content 
or service provider, all third party content and services provided are for personal and non-commercial use; 
you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create 
derivative works from, transfer or sell in any manner or medium any content or services available via this 
device.
•  SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or 
services. Any questions, comments or service-related inquiries relating to the third party content or service 
should be made directly to the applicable content or service provider.
  You may not be able to access content or services from the device for a variety of reasons which may be 
unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure 
to confi gure your device properly. SHARP, its directors, offi cers, employees, agents, contractors and affi liates 
shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of 
cause or whether or not it could have been avoided.
•  ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU 
ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY 
OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT 
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR 
A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, 
COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR 
UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT 
THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS.
•  SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF 
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE 
RELATED TO SUCH THIRD PARTY PROVIDERS.
•  IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR 
ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, 
WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF 
WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES 
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-$-&6@&@JOEE


-$-&6@&@JOEE








 
						

							83
Appendix
Removing the Stand
•Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord.
CAUTION
•  Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Unfasten the four screws used to secure the stand in 
place.Detach the stand from the TV.
12
•  In the installation procedure, be careful not to catch your fi ngers between the TV set and the fl oor.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							84
Appendix
Setting the TV on the Wall
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the product. We 
recommend you to contact a technician for assistance when installing it. 
SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall 
mount on your own. 
CAUTION
•  Install your wall mount on a solid wall perpendicular to the fl oor.
When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest 
retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in 
severe personal injury. Always have two people mount the TV on a wall.
Wall Mount Kit Specifi cations
Standard dimensions for wall mount kits are shown below.
•  VESA screw hole specs (A - B)
in millimeters 
• Standard screw
• Quantity 235/8-153/4(600 - 400)
M8*2
4
657/64(175)
Max
1449/64(375)
Max
WALL MOUNT KIT *11325/64(340)Max137/64(40)MaxWALL MOUNT KIT *1
WALL
153/4(400)
7
7/8(200)
B
235/8(600)AMin35/32(80) 13/32(27.8)
DEPTH OF
MOUNTING HOLES SCREW
WALL MOUNT 
UNIT
MOUNTING
HOLES
CABINET
31/64(12)
B
A
*1Must be smaller than the shaded area.
*2Use 1.25 pitch screws.
•  Do not mount the TV at a tilt.
•  Due to the terminal confi guration on this TV, when you wall-mount this model, make sure there is enough space 
between the wall and the TV for the cables.
•  To use this TV mounted on a wall, remove the cable tie as needed.
•  Do not use screws that do not comply with the VESA standard screw specifi cations.
•  Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside 
of the TV set.
•  Do not fasten the screws too fi rmly or loosely. This may damage the product or cause the product to fall, leading to 
personal injury. SHARP is not liable for these kinds of accidents.
•  SHARP is not liable for product damage or personal injury when a non-VESA or non-specifi ed wall mount is used or 
the consumer fails to follow the product installation instructions.
Do not install the wall mount kit while your TV is turned on. It may result in personal injury due to 
electric shock.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							85
Appendix
Troubleshooting
Problem Possible Solution
•  No power •  Check if you pressed POWER on the remote control unit. 
 Page 19
•  Is the AC cord disconnected?  Page 10
•  Has the power been turned on?  Page 19
•  Unit cannot be operated. •  External infl uences such as lightning, static electricity, may cause improper 
operation. In this case, operate the unit after fi rst turning off the power of the TV or 
unplugging the AC cord and replugging it in after 1 or 2 minutes.
•  Remote control unit does not 
operate.•  Is the equipment to be operated by the remote control unit set correctly? Press TV
to set the remote control unit to the setting for operating the TV.
•  Are batteries inserted with polarity (
e,
f) aligned? 
 Page 11
•  Are batteries worn out? (Replace with new batteries.)
•  Are you using it under strong or fl uorescent lighting?
•  Is a fl uorescent light illuminated near the remote control sensor? 
•  Is "RC Control Lock" selected in "Operation Lock Out"? 
 Page 35
•  Picture is cut off/with sidebar 
screen.•  Is the image position correct? 
 Pages 34 and 67•  Are screen mode adjustments such as picture size made correctly?  Pages 26 and 66
•  Strange color, light color, or color 
misalignment•  Adjust the picture tone.  Pages 29 and 30
•  Is the room too bright? The picture may look dark in a room that is too bright.
•  Power is suddenly turned off. •  Is the sleep timer set? 
 Page 23
•  Check the power control settings.  Page 32
•  The unit's internal temperature has increased. Remove any objects blocking vent or 
clean.
•  No sound •  Is connection to other components correct? 
 Pages 14 to 18 and 61
•  Is the volume too low?  Page 23
•  Is "Variable" selected in "Output Select"?  Page 34
•  Have you pressed MUTE on the remote control unit?  Page 23•  Check the audio output of the connected external equipment. Is the volume too 
low or muted?
•  When external equipment is connected via an HDMI cable, you may need to 
confi gure the audio to be output through the HDMI cable.
•
When audio is not output from external equipment connected to the PC IN or HDMI 2 
terminal, check the "Audio Select" setting. Page 67•  Even when external equipment is connected using an HDMI-certifi ed cable, an audio 
cable connection may be required depending on the type of equipment and the 
media being played back. In this case, in addition to connecting an HDMI-certifi ed 
cable to the HDMI 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the 
AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". 
 Page 67
•  When connecting a PC via an HDMI-certifi ed cable, check the following:
- Is the audio output of the PC confi gured correctly? Check the audio output 
settings and output audio format in Sound Properties on the PC.
The audio formats compatible with this TV are PCM, Dolby Digital. With other 
formats, audio cannot be output.
- Depending on the board, only video signals may be output. In this case, in 
addition to connecting an HDMI-certifi ed cable to the HDMI 2 terminal, connect a 
Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" 
to "HDMI+Analog".
 Page 67
•  If you are using a DVI-HDMI conversion cable to connect external equipment to the 
TV, check the following:
- Is an audio cable connected? The DVI-HDMI conversion cable is for video only. 
Connect a Ø 3.5 mm stereo minijack cable to listen to the audio.
- Is HDMI 2 being used? When the TV is connected to another HDMI terminal, the 
audio and video are not output together even if a Ø 3.5 mm stereo minijack cable 
is connected to the shared AUDIO IN terminal for PC IN and HDMI 2.
-
Check the "Audio Select" setting. Set "Audio Select" to "HDMI+Analog".  Page 67
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							86
Problem Possible Solution
•  No picture •  Is connection to other components correct? 
 Pages 14 to 18 and 61
•  Is the correct input selected?  Pages 14 and 23
•  Is "On" selected in "Audio Only"?  Page 32•  If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the 
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
 Page 67
•  Picture quality of HD programs is 
poor.•  To enjoy HD images from external equipment, you are required to set up HDMI 
connection or component connection.
•  If the program content is not of HD quality, HD images cannot be displayed. Check 
that the program you are viewing provides HD images.
•  The HD cable/satellite set-top box may need to be confi gured to output HD images 
via cable/satellite.
•  The cable/satellite broadcast may not support a signal resolution of 1080p.
•  The TV sometimes makes a 
cracking sound.
•  This is not a malfunction. This happens when the cabinet slightly expands and contracts 
according to change in temperature. This does not affect the TV's performance.
•  The AQUOS ADVANTAGE LIVE 
cannot be displayed.•  Is the ETHERNET cable connected correctly?  Page 70
•  Check the settings of "Internet Setup".   Pages 71 to 72
•
Some Internet functions used on a 
PC are not available from the TV.•  The TV has only limited functions compared with regular PC browsers.   Page 74
Troubleshooting - 3D Images
Problem Possible Solution
•  3D images are not displayed.
•  Is "3D Auto Change" set to "Off"? Press 3D to switch to 3D mode.
 Page 49•  If "3D Auto Change" is set to "Mode 1" or "Mode 2" but no 3D images are displayed, 
check the display format of the content being viewed. Some 3D image signals may not be 
recognized as 3D images automatically. Press 3D to select the appropriate display format 
for the 3D image.
 Pages 47 to 48•  Is the power of the 3D Glasses turned on?
•  Are the 3D Glasses set to 2D mode?
•  Is there an obstacle between the 3D Glasses and the TV, or is something covering 
the infrared receiver on the 3D Glasses? The 3D Glasses operate by receiving a 
signal from the TV. Do not place anything between the 3D infrared emitter on the TV 
and the infrared receiver on the 3D Glasses.
 Page 12
For further details, refer to the operation manual of your 3D Glasses.
Troubleshooting - Error Message
The example of an error message 
displayed on a screenError code Possible Solution
•  Failed to receive broadcast.E202
•  Check the antenna cable. Check that the antenna is correctly setup.
•  No broadcast now.E203•  Check the broadcast time in the program guide.
•  An incompatible audio signal has 
been received. Check the output 
device settings.—
•  This message is displayed when an audio format other than PCM 
or Dolby Digital is input. (The DTS audio format is not supported.)
- Set the audio output format of connected external HDMI 
equipment to PCM or Dolby Digital.
- Refer to the operation manual of the external equipment for 
setting details.
Appendix
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							87
Trademarks
•  SmartCentral is a registered trademark of Sharp Corporation.
•  Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
•  "HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries."
• DivX
®, DivX Certifi ed®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries 
and are used under license.
•  The Wi-Fi CERTIFIED Logo is a certifi cation mark of the Wi-Fi Alliance.
•  The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA
®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certifi cation marks of the Digital 
Living Network Alliance.
•  This product includes DLNA Software 'DiXiM' developed by DigiOn, Inc.
•
 and LC logo mark are registered trademarks of SHARP Corporation.  This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly 
displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.
•  ABOUT DIVX VIDEO: DivX
® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This 
is an offi cial DivX Certifi ed® device that plays DivX video. Visit divx.com for more information and software tools to 
convert your fi les into DivX videos.
•  ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed
® device must be registered in order to play purchased DivX 
Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup 
menu. Go to vod.divx.com for more information on how to complete your registration.
• Netfl ix and the Netfl ix logo are the registered trademarks of Netfl ix, Inc.
•  VUDU™ is a trademark of VUDU, Inc.
•  Skype, the Skype Logo and the S logo and other marks indicated on these instructions are trademarks of Skype 
Limited or other related companies.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							TV
Item Model: LC-90LE745U
LCD panelSize 90
o Class (90 1/64o Diagonal)
Resolution 2,073,600 pixels (1,920 
g 1,080)
TV
FunctionTV-standard (CCIR) American TV Standard ATSC/NTSC System
Receiving
ChannelVHF/UHF VHF 2-13ch, UHF 14-69ch
CATV 1-135ch (non-scrambled channel only)
Digital Terrestrial Broadcast 
(8VSB)2-69ch
Digital cable
*1 (64/256 QAM) 1-135ch (non-scrambled channel only)
Audio multiplex BTSC System
Audio out 10W 
g 2 + 15W (WF)
TerminalsBack panel 
vertical inputsHDMI 1 HDMI in with HDCP, ARC
HDMI 2 HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
HDMI 3 HDMI in with HDCP
HDMI 4 HDMI in with HDCP, MHL
AUDIO OUT Audio out (Ø 3.5 mm stereo jack)
USB 1 Photo/Music/Video mode, Software update
Back panel 
surface inputsCOMPONENT COMPONENT in
VIDEO 1 AV in
VIDEO 2 AV in
PC INANALOG RGB (PC) in (15-pin mini D-sub female connector), 
Audio in (Ø 3.5 mm stereo jack)
RS-232C 9-pin D-sub male connector
Back panel 
horizontal inputsANT/CABLE75
q Unbalance, F Type 
g 1 for Analog (VHF/UHF/CATV) and 
Digital (AIR/CABLE)
AUDIO IN Audio in (Ø 3.5 mm stereo jack)
DIGITAL AUDIO OUTPUT Optical Digital audio output 
g 1 (PCM/Dolby Digital)
ETHERNET Network connector
USB 2 Photo/Music/Video mode, Software update
OSD language English/French/Spanish
Power Requirement AC 120 V, 60 Hz
Power Consumption 381 W (0.1 W Standby with AC 120 V)
WeightTV + stand 150.0 lbs./68.0 kg
TV only 141.1 lbs./64.0 kg
Dimensions
*2 (W 
g H 
g D)TV + stand 80 
7/8g 48 61/64g 17 3/32 inches
TV only 80 7/8g 47 11/16g 4 37/64 inches
Operating temperature
e32°F to 
e104°F (0°C to 
e40°C)
*1  Emergency alert messages via Cable are unreceivable.*2  The dimensional drawings are shown on the inside back cover.
•  As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for 
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production 
units. There may be some deviations from these values in individual units.
Cautions regarding use in high and low temperature environments
•  When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
•  Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a 
heater, as this may cause the cabinet to deform and the front panel to malfunction. 
Storage temperature: 
f4°F to 
e140°F (
f20°C to 
e60°C)
Specifi cations
88
-$-&6@&JOEC


-$-&6@&JOEC