Sharp LC-90LE745U HDTV Owners Guide

19
Turning On/Off the Power
POWER
POWER(On/Standby)
PressPOWER on the TV or on the remote control unit 
to turn the power on.
•  The Initial Installation starts when the TV powers on for the 
fi rst time. If the TV has been turned on before, the Initial 
Installation will not be invoked. For changing the settings of 
the Initial Installation, perform "EZ setup" on the Initial Setup 
menu on page 36.
PressPOWER on the TV or on the remote control unit 
again to turn the power off.
•  The TV enters...

20
3 Press a
/
b to select the time zone where you are 
using the TV, and then press ENTER.
Example
CSTMSTPSTAKSTHASTEST
•  The time zone differs depending on the selected 
country.
•  The factory preset value is the time zone for the capital 
of the selected country.
4 Press a
/
b to select the Daylight Savings Time, 
and then press ENTER.
ManualOff Auto
•  “Auto” is the default selection.
TV Location
Select "Home" or "Store" for the location where you 
plan to install the TV.
5 Press...

21
CH Search (Channel search)
Channel auto search makes the TV look for all 
channels viewable in the set area.
8When "Air" is selected in Antenna setting:
 Press c/
d
 to select "Start", and then press 
ENTER.
CancelStart
When "Cable" is selected in Antenna setting:
1Pressa
/
b to select "Analog & Digital Search 
Start" to search both analog and digital 
broadcasts, or to select "Analog Search Start" 
to search only analog broadcasts, and then 
pressENTER.
Analog...

22
Completed
11 The settings confi rmation screen is displayed. 
Confi rm the information displayed on the screen, 
and then press ENTER.
Examples of the settings confi rmation screen
When one or more channel is received after 
"Antenna & Cable" was selected in step 6 and a 
search was carried out.
OK Language : English
Location & Time  : United States/EST/Auto
TV Location  : Home
Antenna & Cable/STB  : Antenna & Cable
Air/Cable : Air
Search Result   : Digital 4ch
  Analog 7ch
Network Connection   :...

23
Direct Button Operation
Changing Volume
You can change the volume by pressing VOL
k/
l on 
the TV or on the remote control unit.
•To increase the volume, press VOLk.•To decrease the volume, press VOLl.
20
Audio status
Output deviceOutput Select
Fixed Variable
SpeakerVariable sound Mute
•
When “Output Select” is set to “Variable”, the indicator on 
the screen changes as shown below.
60
•See page 34 for details on the Output Select function.
MUTE
Mutes the current sound output.
PressMUTE.
•“” will be...

24
FLASHBACK
PressFLASHBACK  to switch to the previously tuned 
channel or previous input mode.
•Press FLASHBACK  again to switch back to the currently 
tuned channel.
•FLASHBACK  will not work if no channel has been 
changed after the TV is turned on.
SmartCentral
Allows you to directly activate various types of 
applications.
1 Press  SmartCentral  to display the application 
window.
• Press  SmartCentral  again to display a list of 
applications by category.
2 Press  c/
d (or
a/
b ) to select the...

25
If stereo sound is diffi cult to hear.
•  Obtain a clearer sound by manually switching to fi xed 
mono-sound mode.
You can change MTS as shown below to match the 
television broadcast signal.
PressAUDIO to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO mode: 
STEREO MONOSTEREO + SAP mode: ST(SAP)  SAP(ST)    MONO
MAIN + SAP mode: MAIN           SAPMONO mode: MONO
■ Digital broadcasting audio modeThe types of audio transmitted in a digital broadcast include 
SURROUND as well as...

26
Direct Button Operation
VIEW MODE
You can select the screen size.
1 Press VIEW MODE.
•The View Mode menu displays.•The menu lists the View Mode options selectable for the type of video signal currently 
being received.
2 Press VIEW MODE or 
a/
b while the View Mode menu is displayed to select a 
desired item on the menu.
•  You can sequentially select a View Mode that has its own aspect ratio.
•You can have the same settings by choosing "View Mode" on the menu items. (See page 33.)•You may not...

27
1Guide display• This indicates the buttons that can be operated on the 
displayed screen. The guide display varies depending 
on the menu setting screen.
•
The operations for some selected items may be displayed 
in the operational guide bar at the bottom of the screen.
2Item displayed in blue•  This indicates the item currently selected.
•PressENTER to go to the adjustment screen for this item.
3 Item in brackets•  This indicates the current setting for the item.
4 Item displayed in white•  This...

28
On-Screen Display Menu
Menu Items
3D Setup ......................................... Page 49
AQUOS LINK Setup ........................ Page 62
Terminal Setting ................. Pages 33-34, 67
Audio Setup .......................... Page 33
PC input ................................ Page 67
Audio Select .......................... Page 67
Input Skip.............................. Page 34
Input Label ............................ Page 34
HDMI Setup .......................... Page 34
Output Select...