Sharp LC-80LE633U Liquid Crystal Television Operation Manual

9
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections 
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, 
plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use 
commercially available cables.
300-ohm twin-lead cable 75-ohm coaxial cable (round)
75-ohm coaxial cableINOUT
300-ohm
twin-lead cable VHFANTENNAUHF
ANTENNA...

10
Part Names
TV (Front)
Center Icon illumination
(See page 32.)Remote control sensor
* OPC: Optical Picture Control (See page 26.)
OPC sensor *
TV (Rear/Side)
RS-232C terminal
Antenna/
Cable in POWER
button
MENU
button
INPUT
button
Channel
buttons
(CH
U/
V)
Volume
buttons
(VOL
k/
l)
DIGITAL AUDIO 
OUTPUT terminalHDMI 3 terminal
HDMI 4 terminal HDMI 1 terminal
ARC:  Audio Return Channel
  (See pages 49 and 50.) AUDIO OUT terminal
USB 1 terminal
USB 2 
terminal
ETHERNET
terminalHDMI 2 terminal
COMPONENT...

11
1 POWER: Switch the TV power on or enter standby. (See 
page 17.)
2TV,STB,DVD•VCR,AUDIO: Switches the remote 
control for TV, STB, BD, DVD, VCR and AUDIO operation. 
(See pages 47 to 48 for details.)
  * To enter the code registration mode, you need to press 
an appropriate button (STB,DVD•VCR or AUDIO) and 
DISPLAY at the same time.
3 External equipment operational buttons: Operate the 
external equipment.
4 OPTION: Display the Link Operation Menu screen. This 
button will function only when AQUOS...

12
Introduction to Connections
Types of Connection
For connecting the TV to external equipment, use commercially available cables.•   The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
■ Connecting to video equipment or PC
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your 
external equipment and use its appropriate terminals for higher quality images.
Pages
13, 15, 16
Terminal
on...

13
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input 
source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
•  To protect equipment, always turn off the TV before connecting any external equipment.
•  Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making...

14
Connecting to External Equipment
■ When using Component cable (COMPONENT):
• Blu-ray disc player      • DVD player
• HD cable/satellite set-top box
COMPONENT OUT
AUDIO-L (White) AUDIO-R (Red)
Y (Green)
P
B (Blue) P
R (Red)Audio cable
Component video cable
•  To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and 
set the equipment to 1080p output.
•  See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite...

15
Connecting to External Equipment
Connecting a Surround System/Audio System
■ When connecting an AV amplifi er for surround system
DIGITAL AUDIO INPUTOPTICALHDMI IN HDMI OUT
HDMI OUTHDMI-certified cable *1HD Cable/Satellite set-top box
Optical fiber cable *2
•  Letting the TV output the audio to an AV amplifi er:
*1When you connect ARC-compatible equipment, use the HDMI 1 terminal.
*2If the equipment to be connected is not compatible with the ARC, connect an optical fi ber cable.
•  If the image is not in...

16
Connecting a PC
Refer to page 54 for a list of PC signals compatible with the TV.
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
HDMI OUT
HDMI-certified cable
•  Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable 
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to 
"HDMI+Analog". (See page 54.)
•
The HDMI terminals only support digital signal.
■ When...

17
Turning On/Off the Power
POWER
POWER(On/Standby)
PressPOWER on the TV or on the remote control unit 
to turn the power on.
•  For model LC-80LE633U, the control panel is located on 
the left side of the TV as seen from the front.
•  The Initial Installation starts when the TV powers on for the 
fi rst time. If the TV has been turned on before, the Initial 
Installation will not be invoked. For changing the settings of 
the Initial Installation, perform "EZ setup" on the Initial Setup 
menu on...

18
3 Press a
/
b to select the time zone where you are 
using the TV, and then press ENTER.
Example
CSTMSTPSTAKSTHASTEST
•  The time zone differs depending on the selected 
country.
•  The factory preset value is the time zone for the capital 
of the selected country.
4 Press a
/
b to select the Daylight Savings Time, 
and then press ENTER.
ManualOff Auto
•  “Auto” is the default selection.
TV Location
Select "Home" or "Store" for the location where 
you plan to install the TV. This...