Sharp LC-80LE632U HDTV Owners Guide

9
Experiencing HD Images
An HDTV without an HD source is just an ordinary 
TV.
To enjoy HD images on the TV, you should get 
HD programming from the following:
•  Over-the-air broadcasting via HD quality antenna
•  HD cable/satellite subscription
•  HD compatible external equipment
•  For information on updating to HD programming, ask your cable/satellite service provider.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the 
remote control sensor on the TV. Objects...

10
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a b\
rief explanation of the types of connections 
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm\
 coaxial cable with an F-type connector, 
plug it into the antenna terminal at the rear of the TV set. For connect\
ing the antenna cable to the TV, use 
commercially available cables.
300-ohm twin-lead cable
75-ohm coaxial cable (round)
75-ohm coaxial cableIN OUT
300-ohm
twin-lead cable
VHF
ANTENNA...

11
Part Names
TV (Front/Side)
Center Icon 
illumination
(See page 33.)
Remote
control sensor
*1 See pages 18 and 25 for button operations.
*2 OPC: Optical Picture Control (See page 27.)
OPC sensor *2
POWERbutton
MENU button
INPUT button
Channel buttons
(CH U/
V )
Volume
buttons
(VOL k/
l )
*1
TV (Rear )
RS-232C terminal
Antenna/
Cable in
AC INPUT terminal
COMPONENT
terminals
DIGITAL AUDIO 
OUTPUT terminal HDMI 3 terminal
HDMI 4 terminalHDMI 1 terminal
ARC:  Audio Return Channel
  (See pages 52 and 53.)...

12
1 POWER: Switch the TV power on or enter standby. (See page 18.)
2 TV, STB,DVD•VCR, AUDIO: Switches the remote 
control for TV, STB, BD, DVD, VCR and AUDIO operation. 
(See pages 50 to 51 for details.)
  * To enter the code registration mode, you need to press  an appropriate button (STB, DVD•VCR or AUDIO) and 
DISPLAY at the same time.
3 External equipment operational buttons: Operate the  external equipment.
4 OPTION: Display the Link Operation Menu screen. This  button will function only when AQUOS...

13
Introduction to Connections
Types of Connection
For connecting the TV to external equipment, use commercially available \
cables.•   The illustrations of the terminals are for explanation purposes and may\
 vary slightly from the actual products.
■ Connecting to video equipment or PC
Image quality differs depending on the terminal used. To enjoy clearer i\
mages, check the output terminals of your 
external equipment and use its appropriate terminals for higher quality \
images.
Pages
14, 16, 17...

14
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view ext\
ernal source images, select the input 
source from INPUT on the remote control unit or on the TV. (See pages 13 and 22.)
For connecting the TV to external equipment, use commercially available \
cables.
CAUTION
•  To protect equipment, always turn off the TV before connecting any exter\
nal equipment.
•  Please read the relevant operation manual (Blu-ray disc player, etc.) \
carefully before...

15
Connecting to External Equipment
■ When using Component cable (COMPONENT):
• Blu-ray disc player      • DVD player
• HD cable/satellite set-top box
COMPONENT OUT
AUDIO-L (White) AUDIO-R (Red)
Y (Green)
P
B (Blue)
P
R (Red) Audio cable
Component video cable
•  To enjoy 1080p display capability, connect your external equipment using\
 an HDMI-certifi ed cable or a component cable and  set the equipment to 1080p output.
•  See page 14 for connecting a Blu-ray disc player, DVD player or an HD ca\...

16
Connecting to External Equipment
Connecting a Surround System/Audio System
■ When connecting an AV amplifi er for surround system
DIGITAL AUDIO INPUTOPTICALHDMI IN
HDMI OUT
HDMI OUTHDMI-certified cable *1 HD Cable/Satellite set-top box
Optical fiber cable *2
•  Letting the TV output the audio to an AV amplifi er: *1  When you connect ARC-compatible equipment, use the HDMI 1 terminal.
*2  If the equipment to be connected is not compatible with the ARC, connect\
 an optical fi ber cable.
•  If the image is...

17
Connecting a PC
Refer to page 57 for a list of PC signals compatible with the TV.
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
HDMI OUT
HDMI-certified cable
•  Depending on the board, only video signals may be output. In this case, \
in addition to connecting an HDMI-certifi ed cable 
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to t\
he AUDIO IN terminal and set "Audio Select" to 
"HDMI+Analog". (See page 57.)
•
The HDMI terminals only support digital signal.
■  When...

18
Turning On/Off the Power
POWER
POWER(On/Standby)
PressPOWER on the TV or on the remote control unit 
to turn the power on.
•  The Initial Installation starts when the TV powers on for the 
fi rst time. If the TV has been turned on before, the Initial 
Installation will not be invoked. For changing the settings of 
the Initial Installation, perform "EZ setup" on the Initial Setup 
menu on page 34.
Press POWER on the TV or on the remote control unit 
again to turn the power off.
•  The TV enters...