Sharp Lc 60le925 Operation Manual

							 49
Enjoying Photo/Music/Video Playback
Select Slide Show Interval
Specify the length of time before the next image 
appears.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select Select Slide Show Interval, 
and then press ENTER.
3 Press a/
b to select 5sec, 10sec, 30sec or 
60sec, and then press ENTER.
Depending on the photo  les, the length of the slide show 
interval may differ from the selected interval time.
Select Slide Show BGM
You can select the music to be played in the 
background while the slide show is being displayed.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to  select Select Slide Show BGM, 
and then press ENTER.

B on the 
thumbnail selection screen.
3  Select the music.
... ...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP33:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example 
■ Buttons for slide show BGM select operation
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERPlay music.
RETURNReturn to the previous process.
A (red)Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green)Stop music.
C (blue)Play/Pause music.
D (yellow)Display the USB MENU screen.
4   Press RETURN to display the thumbnail selection 
screen, and then press C to start the slide show 
and the background music.
All of the music  les are selected by default.
Set/Reset All Slide Show Image
Set or reset the images to be displayed.
1   Press D to display the USB MENU screen.
2   Press a/
b to select Set All Slide Show Image/
Reset All Slide Show Image, and then press 
ENTER.

checkmarks are added to all the images.

all the checkmarks from all the images.
... ...picture 5picture 4picture 2picture 1picture 3
Example
3   Press C to start the slide show.
If no images have been selected, Cannot display the data 
is displayed and the slide show does not start. 

-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 50
Enjoying Photo/Music/Video Playback
Music Mode
... ...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP33:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
■ Buttons for music mode
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERPlay music.
RETURNReturn to the previous process.
A (red)Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green)Stop music.
C (blue)Play/Pause music.
D (yellow)Display the USB MENU screen.
When there are invalid music  les, the X mark will be 
displayed for the  le.
The displayed play time may differ slightly from the actual 
play time depending on the  les.
USB Menu
Set All Auto Play
Reset All Auto PlayUSB MENU
Example
Set/Reset All Auto Play
Set or reset the music to be played back.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select Set All Auto Play/Reset All 
Auto Play, and then press ENTER.

added to all the music  les.

checkmarks from all the music  les.
3   Press C to play back the music.
If no music  les have been selected, Cannot playback the 
audio  le is displayed and the music is not played back 
automatically. 


Video Mode
... ...video 5video 4video 2video 1video 3VIDEO_01.avi
VIDEO_02.divx
VIDEO_03.divx
VIDEO_04.avi
VIDEO_05.divx
VIDEO_06.divx
VIDEO_07.avi3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
Example
■ Buttons for fi le selecting operations
Buttons Description
a
/
b/c
/d
Select a desired item.
ENTERWhen selecting a video  le: Play the
video.
RETURNReturn to the previous process.
A (red)Select/deselect items (checkmarks are 
addded to the selected items).
D (yellow)Display the USB MENU screen.
■ Buttons for playing mode
Buttons Description
a
Go to the beginning of a  le by pressing a
 
once and the previous  le by pressing a
 
twice.
bGo to the next  le.
d
The fast forward speed changes every time 
you press d. After playing to the end, the TV 
goes to the next  le and starts to play.
c
The reverse speed changes every time you 
press c
. After going back to the beginning, 
the TV starts to play the same  le.
RETURNGo back to the  le selection screen.
ENTERPause the video.
3DSwitches between 2D and 3D modes.
A (red)Jump to the scene where playback was last 
stopped.
B (green)Stop a video.
C (blue)Reveal/hide the Guide Display.
-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 51
■ Using the control panel
You can use the control panel for video playback 
operations.
You can call up this operation panel by pressing 
MENU after you press 
a
/
b to select USB Operation 
Panel from System Options > View Option.
PLAY System Options0:04:11 / 0:07:42
Resume Audio CC
jump
Reverse/fast forward continues from one  le to another 
during continuous playback.
Use CC on the operation panel to change the Closed 
Caption display. You can also switch the Closed Caption 
display by using System Options > View Option > 
Change CC or by pressing CC on the remote control 
unit.
Use Audio on the operation panel to change the audio. 
You can also switch the audio by using System Options > 
View Option > Change Audio.
USB Menu
Set All Auto Play
Reset All Auto PlayUSB MENU
Example
Set/Reset All Auto Play
Set or reset the video to be played back.
1   Press D to display the USB MENU screen.
2   Press 
a/
b to select Set All Auto Play/Reset All 
Auto Play, and then press ENTER.

added to all the video  les.

checkmarks from all the video  les.
3   Press ENTER to play back the video.
DivX® Setup
This is the function to con rm your registration code. 
You need to register the code at http://www.divx.com.
1 Press MENU to display the menu screen.
2 Press c
/d
 to select Initial Setup, and then press 
ENTER.
3 Press a
/
b to select DivX® Setup, and then 
press ENTER.



■ DivX® VOD registration
You can  nd your registration code on this menu. You
need to register the TV at http://www.divx.com before 
playing the DivX content.
■ DivX
® VOD deregistration
You can  nd your deregistration code on this menu. 
You need to deregister the TV at http://www.divx.com 
to release the registration.
USB Memory Device Compatibility
USB memory 
deviceUSB Memory, USB card reader (Mass 
Storage class)
File system FAT/FAT32
Photo  le 
formatJPEG (.jpg) (DCF2.0 compliant)
Multi-Picture Format (.mpo) (CIPA 
DC-007 Compliant)
MP Type : Multi view individually image 
(stereoscopic view)
Music  le 
formatMP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video fi le format
File
extensionContainer Video Audio
*.avi AVI
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4
Motion JpegMP3
Dolby Digital
LPCM
ADPCM
*.mkv MKV
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4MP3
Dolby Digital
LPCM
ADPCM
*.asf ASF
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4
VC-1MP3
Dolby Digital
LPCM
ADPCM
*.wmv ASF VC-1 WMA
*.mp4
*.movMP4
(SMP4)H.264
MPEG4
XviDMP3
AAC
*.mpg
*.mpegPSMPEG2
MPEG1Dolby Digital
MPEG AudioLPCM
Progressive format jpeg  les are not supported.
Music  les in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.
Some video  le formats may not be played depending on 
the  le.
Some images may not be displayed in the appropriate 
aspect ratio depending on the  le format. 




Enjoying Photo/Music/Video Playback
-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 52
Presetting Remote Control Function
You can operate the connected AV products (AV 
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, 
LD) using the presetting manufacturer function of your 
remote control unit.
14
12
11
6
13
10
8
9
7
54 32
1
Presetting manufacturer codes
1   Press an appropriate button (STB, DVD•VCR or 
AUDIO) to operate the connected equipment.
2   Press an appropriate button (STB, DVD•VCR or 
AUDIO) and DISPLAY at the same time to enter 
the code registration mode.
3   Press 0–9 to enter the manufacturer code. (See 
page 53.)
 Preset mode is  nished once the LED no longer lights 
up.
4   After registering the code, the LED will stop blinking 
then turn off after one second. (If you perform an 
incorrect operation, the LED will blink quickly then 
turn off.)
Operating the Connected Equipment
To operate the connected equipment, press STB, 
DVD∙VCR or AUDIO to select your device. (STB 
(cable/satellite set-top box), DVD, BD, VCR or AUDIO.) 
The remote control unit button will function as follows.
 When you operate VCR, DVD or BD, press INPUT to select 
the terminal connected to your device. 
 CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)  
2 I
3 G 

4 H

disc players, pressing the button twice may open the disc 
tray. (DVD, BD)
5 K
currently playing. Each time you press it, you move back 
to the start of the previous chapter. (DVD, BD)
6 0–9, • (DOT) (STB)
channel that you wish to watch.
7 J
(VCR)

8 F
9 L
chapter. Each time you press it, you move ahead to the 
start of the next chapter. (DVD, BD)
10 EREC
11 FLASHBACK
channel you were watching immediately before. Some 
manufacturers do not preset FLASHBACK. (STB)
12 CH
r/
sCHr or CHs to tune in to a higher or lower 
channel. (STB)

(VCR)
13 MENU
display. (DVD, BD)
14 a/
b/
c/
d, ENTER
a/
b/
c/
d: Press the button to select items on the STB 
GUIDE screen or STB MENU screen. (STB)
  Press the button to select items on the DVD/BD menu 
screen. (DVD, BD)
ENTER: Press to activate the selected function. (STB, 
DVD, BD)
Other Viewing Options
-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 53
Manufacturer codes Other Viewing Options
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY  WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA09
13
04
12
04
09
10, 13, 14
04
04
04
09, 16, 17, 22
09
04, 05, 06
12
04
02
09
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
09
10
09
REMOTE CONTROL CODE 
NUMBER VCR BRAND
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH24
31
36
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
REMOTE CONTROL CODE 
NUMBER DVD/BD/LD BRAND
 Depending on the brand, the codes of some BD players 
may not be supported.
ANVISION
CABLE STAR
EAGLE 
G.INSTRUMENT
GERROLD
JERROLD
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH04, 05
04, 05
05
02, 03, 10, 11, 17, 20
17
02, 03, 10, 11, 12, 20, 
25-34
04, 05, 08, 12, 15, 16, 
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
07 
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16, 
18, 19, 22, 23
06, 35
REMOTE CONTROL CODE 
NUMBER STB BRAND
 Numbers marked with * are SAT codes, all others are STB 
codes.
SHARP
SHARP (SOUND BAR)01
02
AUDIO BRANDREMOTE CONTROL CODE 
NUMBER
-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 54
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
 Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate 
compatible system equipment (Blu-ray disc equipment, AV ampli er, DVD).
 By connecting AQUOS LINK-compatible devices with HDMI-certi ed cables to the TV, you can control a 
recorder or AV ampli er using the remote control of the TV.
 AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Back panel vertical inputs
Example
AQUOS LINK-compatible 
Audio system AQUOS BD Player
HDMI-certied cable 
* Use HDMI 1 to connect 
   ARC-compatible equipment.
HDMI-certied cable  Optical ber cable*Connecting AQUOS 
BD Player via AQUOS 
LINK-compatible 
Audio system 
For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
Point the remote control toward the TV, not to connected HDMI equipment.
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certi ed cable.
Up to 3 pieces of HDMI recording equipment and one AV ampli er can be connected using this system.
These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on 
the equipment and select the appropriate input source using INPUT. 




Connected AQUOS LINK-compatible devices can be operated without 
changing the settings of the remote control unit. 
OPTION button will function only when AQUOS LINK is used.
■ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the 
image from the HDMI source.
■
 One Touch Recording
Press 
EREC while you are viewing a broadcast received with the AQUOS 
LINK-compatible recorder. The AQUOS LINK automatically recognizes the 
connected HDMI device and starts recording.
■
 Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and 
you can control the TV and the devices as if using a universal remote control.
■
 Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
The above description is an example of the AQUOS LINK function.
The steps in “AQUOS LINK Setup” on page 55 need to be completed beforehand.
Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV. 


-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 55
AQUOS LINK Setup
Menu
System Options
AQUOS LINK Setup
System
Options
AQUOS LINK Control[On]Auto Power On[Yes]
[Auto]
Selecting Recorder
Channel Select Key
Audio Return Channel
Example
     
1   Press MENU to display the MENU screen, and then 
press 
c/
d to select System Options.
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
3   Press 
a/
b to select a speci c item, and then press 
ENTER.
4   Press 
a/
b (or 
c/
d ) to select the desired setting, 
and then press ENTER.
5   Press MENU to exit.
AQUOS LINK Control
Select AQUOS LINK Control to disable AQUOS LINK 
function even when an AQUOS LINK-compatible HDMI 
device is connected to the TV. This function prevents 
the device from starting to operate unexpectedly.
On:  You can operate AQUOS LINK-compatible 
equipment.
Off:  AQUOS LINK function does not work.
Auto Power On
If this is activated, the One Touch Play function is 
enabled.
Yes: While the TV is in standby mode, it automatically 
turns on and plays back the image from the HDMI 
source.
No: This function does not work.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are 
connected, this function allows you to set the recorder 
for recording when you press 
EREC on the TV’s 
remote control unit.
Press 
a/
b to select the recorder for recording.
When an AQUOS LINK-compatible audio system or other 
equipment is connected between the TV and recorder, 
“Sub” is displayed. 
Using AQUOS LINK
Channel Select Key
This function can be set for each input terminal.
On: The remote control unit of the TV can be used to 
select the channel, display program information, and 
perform other operations of a connected AQUOS 
LINK-compatible recorder.
Off: This function does not work.
Audio Return Channel
This function allows you to listen to the TV audio via 
audio equipment without using an optical  ber cable, 
which conventionally is required.
Requirements for using an ARC-compatible AV 
amplifi er:
ARC-compatible AV ampli er connected to the ARC-
compatible HDMI terminal (HDMI 1).
(Refer to the operation manual of the ARC-compatible 
equipment for details.)
Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-
compatible audio equipment.
Off: This function does not work.
If the TV audio cannot be output from the AV ampli er even 
after making the necessary settings, connect the TV to the 
AV ampli er with an optical  ber cable and select “Off”.
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Press 
d to start playing back a title.
The last played program is played back. You can use the 
following buttons during broadcast viewing.
Buttons Description
POWER
(SOURCE)Turns the power of the HDMI connected devices 
on and off.
GHold down to go in reverse.
IStarts playback.
JHold down to fast forward.
HPlayback stops.
FSets pauses and still pictures.
TPressing quickly once takes you to the start of the 
chapter currently playing. Each time you press it, 
you move back to the start of the previous chapter.
UPressing quickly once takes you to the start of the 
next chapter. Each time you press it, you move 
ahead to the start of the next chapter.
The buttons T/U do not function with the following 
Blu-ray disc players currently available.
- BD-HP20U, BD-HP50U 




-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 56
Link Operation Menu
Recorder Power On/Off
Device Operation panel
[By AQUOS SP]
Play from Rec. List
Show Start Menu
Change Media of Device
Link Booking (Rec. Book)
Change Audio Output Device
Change Surround Mode
Choosing Operating Device
AQUOS LINK Setup Link Operation
MenuLink
Operation
     
Start Recording
Stop Recording Link Operation
MenuLink
Operation
     
Turning On/Off AQUOS LINK-compatible 
Equipment
You can manually turn on/off the power of connected 
AQUOS LINK-compatible equipment.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Recorder Power On/Off”, and 
then press ENTER.
3   Select “On” (or “Off”) and press ENTER to turn on 
(or off) the equipment.
Using AQUOS LINK
     
One Touch Recording
This function allows easy one-touch recording of the 
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by 
simply pressing 
EREC on the remote control.
Prepare the connected AQUOS LINK-compatible 
recorder for recording. Check the following items.
Make sure that the antenna cable is connected.
Check that there is suf cient available space on the 
recording media (HDD, DVD, etc.).
On the TV, use “AQUOS LINK Setup” and “Selecting 
Recorder” to select the equipment for recording.
By default, the recorder connected to HDMI 1 is selected 
for recording.
1 Press EREC to start recording.
When you are viewing a broadcast received with the 
AQUOS LINK-compatible recorder selected in Selecting 
Recorder, recording to the AQUOS recorder of the 
broadcast being viewed starts.
When you are viewing a broadcast received with 
equipment other than the AQUOS LINK-compatible 
recorder selected in Selecting Recorder or other 
external input equipment, pressing 
EREC on the remote 
control does not start recording.
2  Use the Link Operation Menu to stop recording.
1 Press OPTION to display the Link Operation 
Menu screen.
2 Press a
/
b to select “Stop Recording”, and 
then press ENTER.
Start/Stop Recording
You can also use the Link Operation Menu for 
recording on the connected AQUOS LINK-compatible 
equipment.
1 Press OPTION to display the Link Operation Menu 
screen.
2  Select “Start Recording”, and then press ENTER to 
start recording.
You can also start recording by pressing EREC on the 
remote control unit.
3  Select “Stop Recording”, and then press ENTER to 
stop recording.







-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 57
Using the Device Operation Panel
You can use the device operation panel to control 
playback operations.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Device Operation Panel”, and 
then press ENTER.
3   Press 
a/
b/
c/
d to select the desired operation.
This function works only when AQUOS LINK-compatible 
equipment with the Device Control Panel function is 
connected.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the 
AQUOS LINK-compatible equipment.
1   Power on the AQUOS LINK-compatible equipment, 
and select appropriate external input.
2   Press OPTION to display the Link Operation Menu 
screen.
3   Press 
a/
b to select “Play from Rec. List”, and 
then 
press ENTER.
The title list data from the connected AQUOS LINK-
compatible equipment displays.
4   Select the title with 
a/
b/
c/
d, and then press 
d 
to start playback.
This function works only when AQUOS LINK-compatible 
equipment is connected.
Displaying the Setup Menu of AQUOS 
LINK-Compatible Equipment
You can call up a setup menu from the connected 
AQUOS LINK-compatible equipment.
1    Press OPTION to display the Link Operation Menu 
screen.
2   Press a/
b
 to select Show Start Menu, and then 
press ENTER.
The setup menu of the AQUOS LINK-compatible 
equipment is displayed.
Depending on the status of the equipment (recording or in 
standby mode, etc), the setup menu will not be displayed.
The setup menu will not be displayed with the player 
BD-HP20U currently available.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
You can switch the media (HDD or DVD) for playback 
or recording on the AQUOS LINK-compatible recorder.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Media of Device”, 
and then press ENTER.
3  Select the desired media such as DVD or HDD. 
The Media type toggles each time you press ENTER in 
“Change Media of Device”.
Select the media to be operated by the player. 







Using AQUOS LINK
Timer Recording
You can call up the AQUOS LINK-compatible 
recorder’s EPG and preset timer recordings using the 
TV’s remote control.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Link Booking (Rec. Book)”, 
and then press ENTER.
The recorder’s EPG is displayed.
3   Select the program to record.
 You can use 
a/
b/
c/
d,
 ENTER, RETURN, EXIT and 
the colored buttons.
This function works only when an AQUOS LINK-compatible 
recorder is connected.
Refer to the operation manual of the recorder for details.
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the 
AQUOS LINK-compatible audio system and manually 
change its sound mode.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Audio Output 
Device”, and then press ENTER.
3   Press 
a/
b to select “By AQUOS audio SP”, and 
then press ENTER.
The sound from the TV speaker is muted and only the 
sound from the AQUOS LINK-compatible audio system 
is audible.
You can use VOL
k/
l and MUTE.
Select “By AQUOS SP”, and then press ENTER to 
listen to the TV sound.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Change Surround Mode”, 
and then press ENTER.
The sound mode changes each time you press ENTER.
Refer to the operation manual of the AQUOS LINK-
compatible audio system for details.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “Choosing Operating Device”, 
and then press ENTER. The HDMI device toggles 
each time you press ENTER.
Displaying the Link Operation Menu
1   Press OPTION to display the Link Operation Menu 
screen.
2   Press 
a/
b to select “AQUOS LINK Setup”, and 
then press ENTER.
The AQUOS LINK Setup menu screen is displayed. 







-$@-&6/@&JOEC


-$@-&6/@&JOEC









 
						

							 58
VIEW MODE
You can select the screen size.
1   Press VIEW MODE.
The View Mode menu displays.
The menu lists the View Mode options selectable for the type of video signal currently 
being received.
2   Press VIEW MODE or 
a/
b while the View Mode menu is displayed to select a 
desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.
Connect the PC before making adjustments. (See page 17.)
Selectable screen size may vary with input signal type.
You can have the same settings by choosing View Mode on the menu items. (See page 30.)You may not be able to change the View Mode while in 3D mode.
Example: Screen size images
Input signal Normal Zoom Stretch Dot by Dot
4:3Keeps the original 
aspect ratio in a full 
screen display.For viewing 
widescreen 
programs. The top 
and bottom of the 
image is cropped.An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.
Input signal Stretch Dot by Dot
16:9An image fully  lls the 
screen.Detects the resolution 
of the signal and 
displays an image with 
the same number of 
pixels on the screen.







Using a PC
Displaying a PC Image on the Screen
-$@-&6/@&JOEC


-$@-&6/@&JOEC