Sharp LC-60LE632U, LC-70LE732U HDTV Owners Guide

 9
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections 
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, 
plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use 
commercially available cables.
300-ohm twin-lead cable 75-ohm coaxial cable (round)
75-ohm coaxial cableINOUT
300-ohm 
twin-lead cable VHFANTENNAUHF...

10
Part Names
TV (Front)
Center Icon illumination
(See page 32.)Remote control sensor
* OPC: Optical Picture Control (See page 26.)
OPC sensor *
TV (Rear/Side)
RS-232C terminal
Antenna/
Cable in
POWER
button
MENU
button
INPUT
button
Channel
buttons
(
CH
U/
V )
Volume
buttons
( VOL
k/
l ) COMPONENT
terminals
DIGITAL AUDIO 
OUTPUT  terminal HDMI 3
 terminal
HDMI 4  terminal
HDMI 1
 terminal
ARC:  Audio Return Channel
  (See pages 51 and 52.) VIDEO 2
terminals
VIDEO 1
terminals
AUDIO OUT  terminal
USB 1...

 11
1 POWER: Switch the TV power on or enter standby. (See 
page 17.)
2 TV, STB, DVD•VCR, AUDIO: Switches the remote 
control for TV, STB, DVD, BD, VCR and AUDIO operation. 
(See pages 49 to 50 for details.)
  * To enter the code registration mode, you need to press 
an appropriate button (STB, DVD•VCR or AUDIO) and 
DISPLAY at the same time.
3 External equipment operational buttons: Operate the 
external equipment.
4 OPTION: Display the Link Operation Menu screen. This 
button will function only when...

 12
Introduction to Connections
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
 Over-the-air broadcasting via HD quality antenna
 HD cable/satellite subscription
 HD compatible external equipment
 For information on updating to HD programming, ask your cable/satellite service provider.
Types of Connection
Image quality differs depending on the terminal used. To enjoy clearer images, check the...

 13
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input 
source from INPUT on the remote control unit or on the TV. (See pages 12 and 21.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
 To protect equipment, always turn off the TV before connecting any external equipment.
 Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making...

 14
Connecting to External Equipment
■ When using Component cable (COMPONENT):
Blu-ray disc player     DVD player
COMPONENT OUT
Back panel
surface inputs
AUDIO-R (Red) AUDIO-L (White)
Y (Green)
P
B (Blue) P
R (Red) Audio cable
Component video cable
 To enjoy 1080p display capability, connect your external equipment using an HDMI-certi ed cable or a component cable and 
set the equipment to 1080p output.
 See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to...

 15
Connecting to External Equipment
Connecting an Audio Amplifi er
■ When using optical fi ber cable:
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio 
outputs from the terminal.
DIGITAL AUDIO INPUTOPTICAL
Optical ber cable
Back panel
horizontal inputs
 Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI 
connection. In this case, set the audio formats of the connected equipment to PCM,...

16
Connecting a PC
Refer to page 56 for a list of PC signals compatible with the TV.
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
HDMI OUT
Back panel 
vertical inputs
HDMI-certified cable
•  Depending on the board, only video signals may be output. In this case, \
in addition to connecting an HDMI-certifi ed cable 
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to t\
he AUDIO IN terminal and set "Audio Select" to 
"HDMI+Analog". (See page 56.)
•
The HDMI terminals only...

 17
Turning On/Off the Power
POWER
POWER (On/Standby)
Press POWER on the TV or on the remote control unit 
to turn the power on.
 The Initial Installation starts when the TV powers on for the 
 rst time. If the TV has been turned on before, the Initial 
Installation will not be invoked. For changing the settings of 
the Initial Installation, perform EZ setup on the Initial Setup 
menu on page 33.
Press POWER on the TV or on the remote control unit 
again to turn the power off.
 The TV enters standby and...

 18
Antenna & Cable/STB
Select the type of connection you will use to 
watch TV.
3 Press c/
d
 to select Antenna & Cable or Set-
top box, and then press ENTER.
Set-top boxAntenna & Cable
  To watch TV via an antenna or cable 
connection (without using a set-top box):
  Select Antenna & Cable, and then go to step 4.
  To watch TV via a set-top box:
1 Select Set-top box, and then press ENTER.
2  To watch TV, select the input source 
corresponding to the terminal connected to the 
set-top box. When doing...