Sharp Lc 52xd1e Operation Manual

							
 19
Menu operations
Other menu items
Some of the useful features can be directly called up by 
pressing assigned buttons on the remote control.
NOTE
•  You can adjust the factory presets given in “STANDARD”, “SOFT”, “ECO” and “DYNAMIC”.
•  You can assign different AV mode to each external input  source.
•  Enhanced Picture Contrast technology detects the source  video characteristics and smoothly adjusts the screen 
brightness accordingly, enabling deeper black levels.
•  Enhanced Picture Contrast is activated when you turn the  OPC function off for the items “STANDARD”, “SOFT” and 
“DYNAMIC” in AV mode.
STANDARD
: For a highly defi ned image in a normally 
bright room (Enhanced Picture Contrast: On)
SOFT : Creates a softer image. (Enhanced Picture 
Contrast: On)
ECO : Reduces power consumption. (Enhanced Picture 
Contrast: Off)
DYNAMIC : For a clear-cut image emphasising high 
contrast for sports viewing. (Enhanced Picture Contrast: 
On)
USER : Allows the user to customise settings as desired. 
You can set the mode for each input source. (Enhanced 
Picture Contrast: Off)
AV mode
AV mode gives you fi ve viewing options to choose from 
to best match the system environment, which can vary 
due to factors like room brightness, type of programme 
watched or the type of image input from external 
equipment.
Press  AV MODE .
•  The AV mode menu 
displays.
Press  AV MODE  or 
a/
b  
while the AV mode menu 
displays on the screen.
•  As you toggle down 
the options, each is 
immediately refl ected on the screen. No need to 
press  OK.
1
2AV mode
SOFT
ECO
DYNAMIC
USER
STANDARD
INPUT SOURCE
Use the INPUT SOURCE screen to select/check the 
external equipment connected to the terminal(s) on the 
back of the TV.
To watch images from 
external AV equipment, 
press  b. (Page 10)
•  To close the INPUT SOURCE 
screen, press  b again.
Press 
a/
b  to select the 
corresponding terminal, and 
then press  OK.
1
2
Status display
 Press 
p,
 a status display appears for a few 
seconds.
2  ZDF     Mono
13:51
•  In the top line you can see the name of the programme. See page 18 for how to customise the 
settings for the status display. 
INPUT SOURCE
TV
DTV
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
Item
Still image
You can freeze a motion picture on the screen. Press  3.
Press  3 again to exit still image.
NOTE
•  This function may not be available depending on signal 
condition.
1
2
OPC
Automatically adjusts the brightness of the screen.
 Press  OPC on the remote control unit to switch 
the Optical Picture Control on and off.
NOTE
•  When set to “on”, the TV senses the surrounding light and 
automatically adjusts the backlight brightness. Make sure 
no object obstructs the OPC sensor, which could affect its 
ability to sense surrounding light.
•  Under the factory default condition, OPC becomes active  when you select “ECO” for the AV mode.
•  OPC turns off whenever an adjustment is made to the  “Backlight” setting.
•  OPC can be adjusted and reset for each individual AV  mode.
Action mode
This function improves LCD response and moving 
picture quality by reducing motion blur.
 Press  ACTION to turn the Action mode on/off.
•  The Action mode screen indicates the current on/off 
status.
•  The Action mode screen goes out afters several  seconds.
 
						

							
 20
Menu operations
Wide modes
You can select the picture size. Selectable picture size 
varies with the type of signal received.
Basically, if you set Auto format to “on” in the Setup 
menu, the optimum Wide mode is automatically chosen 
for every broadcast. You can however, change the 
screen format manually as explained below.
NOTE
•  Aside from manually changing the Wide modes as explained herein, the TV may detect and select the 
optimum Wide mode according to the signal received.
Press  f.
•  The Wide modes menu displays.
•  The menu lists the wide mode options selectable for 
the type of video signal currently received.
Press  f or 
a/
b  while the Wide modes menu 
displays on the screen.
•  As you toggle down the options, each is immediately 
refl ected on the screen. No need to press  OK.
1
2
Full : For 16:9 squeeze pictures.
Normal : For 4:3 “standard” pictures. A side bar appears 
on each side.
Panorama : In this mode the picture is progressively 
stretched toward each side of the screen.
Cinema 16:9 : For 16:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Cinema 14:9 : For 14:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Item (for SD (Standard) signal)
Full : Display with the Overscan image. Crop all sides of 
screen.
Underscan : Display with the Underscan image. 
(Display with the High-Defi nition image compressed 
optimally. Noise may appear on the edge of the screen 
with some programmes.)
Item (for HD (High-Defi
 nition) signal)
Wide modes
You can select the picture size.
Press  f.
•  The Wide modes menu displays.
Press 
f or 
a/
b  to select a desired item on 
the menu.
NOTE
•  Connect the PC before making adjustments. (Page 11)
•  Selectable picture size may vary with input signal type.
EXAMPLE
1
2
PC only
Full : An image fully fi lls the screen. 
Normal : Keeps the original aspect ratio in a full screen 
display.
Normal Full
Item
 
						

							
 21
Menu operations
Analogue Teletext
What is Teletext?
Teletext broadcasts pages of information and 
entertainment to specially equipped television sets. 
Your TV receives Teletext signals broadcast by a TV 
network, and decodes them into graphical format for 
viewing. News, weather and sports information, stock 
exchange prices and programme previews are among 
the many services available.
Turning on and off Teletext
Select a TV channel or external input source 
providing the Teletext programme.
Press m to display the Teletext.1
2
•  Many stations use the TOP operating system, while 
some use FLOF (e.g. CNN). Your TV supports both 
these systems. The pages are divided into topic 
groups and topics. After switching on the teletext, up 
to 2000 pages are stored for fast access.
Press  m again to display the Teletext on the 
right screen and the normal image on the left 
screen.
•  Each time you press  m, the screen switches as 
shown below.
•  If you select a programme with no Teletext signal, “No  text” displays.
•  The same message displays during other modes if no  Teletext signal is available.
3
  100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . .    120
Wird auch der Nahverkehr teurer? . . . . . . . .    121
Australien: Keine Zugeständnisse  . . . . . . . .    122
Tote bei Zugunglück in Schweden . . . . . . . .    532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
Formel 1: Schumacher erneut vorne . . . . . . .  213
Tagesschau . .  110/112  Kultur. . . . . . . . .    500
Wetter. . . . . . . . . . .  170  Gesellschaft . . .  530
Sport. . . . . . .   200/600  Lotto/Toto . .    666
TV Guide . . .  300/400  Wirtschaft. . . . . .   700
                  Internet: www.ard-text.de
–         +Inhalt       tagesschau
Index
> 101
Page selection
TELETEXT
TELETEXT
NOTE
•  Teletext will not work if the selected signal type is RGB.  (Page 15)
Using analogue teletext menu
  While in the analogue teletext mode, press  MENU  to display the Teletext Menu.
Menu
Reveal Setup
Newsflash
Newsfl  ash
If you activate “Newsfl ash” in the teletext menu, the 
current page is hidden. The 
m symbol at the top left 
shows that the newsfl ash function is enabled (you are 
in teletext mode). If its contents are updated and it is a 
small news window, then this is displayed. If, however, 
it is a page that fi lls the screen, the symbol is shown in 
blue and the page can be displayed by pressing  OK.
Reveal/Conceal
The teletext contains hidden information e.g., for quiz 
questions or VPS times in programme preview pages. 
This is the same function as pressing 
k.
 
						

							
 22
Menu operationsButtons for teletext operation
Sub-title pages
Teletext subtitles
HiTextwith nomal size
yes
Standard
Russian Greek
Character set
Menu
Setup
Reveal
Newsflash
Buttons
Colour (Red/
Green/Yellow/
Blue)
 - 
v  (Top/
Bottom/Full)
k  (Reveal 
hidden Teletext)
3  (Freeze/
Hold)
[  (Subtitle for 
Teletext)
1  (Subpage) Description
Select a group or block of pages displayed 
in the coloured brackets at the bottom of the 
screen by pressing the corresponding  Colour 
(Red/Green/Yellow/Blue)  on the remote 
control unit.
Directly select any page from 100 to 899 by 
using  
 - .
Switch the Teletext image to Top, Bottom or 
Full.
Reveal or conceal hidden information such as 
an answer to a quiz.
Stop updating Teletext pages automatically or 
release the hold mode. 
Display the subtitle or exit the subtitle screen.
•  Subtitle will not be displayed when the service  does not contain the subtitle information.
Reveal or hide subpages.
•  c/
d  button: Select subpage.
•  Red button: Move to the previous page.
•  Green button: Move to the following page.
•  These two buttons are shown on the screen  by the signs  l and 
k.
Setup
E Sub-title pages
Some stations provide teletext subtitles for the hearing 
impaired. For every station you can enter the teletext 
page on which subtitles can be found. The factory 
setting for all stations is page 150. This function can be 
started by pressing  [ with the menu screen open.
E Teletext subtitles
This function displays subtitles transmitted via teletext 
in normal or double size.
E  Character set
You can set the teletext language display to the 
language listed. This is necessary, for example, for 
Turkish or Polish teletext.
E  HiText
HiText (Level 2.5) can be used to select an improved 
teletext video display. This will be effective as soon as 
the TV station broadcasts the required information.
 
						

							
 23
DTV On-Screen Display
Example
1 Language
•  To customise the language preference for audio and MHEG5 application.
2  Programme Setup
•  To confi gure various settings for each service. These 
include: Fav(ourite), Lock, Move, Move To, Skip, 
Select, Erase, Label, and View functions. 
3  Installation
•  To scan all services available in your area, or to label/
erase/re-scan the selected carrier.
4  System Setup
•  To confi gure On-Screen Display and Child Lock 
settings. 
5  Accessories
•  To display the current version of the software or to 
allow the software upgrade to take place.
6
 Common Interface
•  To display the current Common Interface details.
7  Navigation buttons
•  To navigate within the DTV Menu screen.
DTV menu operations
[:  Press to display the subtitle selection screen.
m :  Press to display TELETEXT or start the MHEG5 
presentation, if available.
 - :  Aside from direct channel entry, each of the  -  numeric buttons have a unique 
function assigned in the Programme Setup 
screen. 
DTV :  Press to access DTV mode.
EPG :  Press to open the EPG screen.
ESG :  Press to open the ESG screen.
RADIO :  Press to switch between TV and RADIO mode.
  •  Due to large variation in transmitted volume  levels in RADIO mode, some stations will 
produce distortion if the volume level is set 
too high.
2 :  Press to open the multi audio screen.
DTV MENU :  Press to open or close the DTV Menu screen.
LIST :  Press to open the Programme List.
p :  Press to open the service banner or view 
detailed information from the EPG/ESG screen.
a /
b /
c /
d :  Press to select a desired item on the screen or 
adjust a selected item.
OK :  Press to go to the next step or complete the 
setting.
  Press to open the Programme list when no  other menu screen is active. (Except external 
input.)
END :  Press to exit the current menu screen without 
saving the changes.
Colour :  Each of the coloured buttons have a unique 
function assigned in the menu screen. 
RETURN :  Press to return to the previous step.
DTV menu operation buttons
Use the following buttons on the remote control unit to 
operate the DTV Menu.
DTV common operations
DTV common menu operation
Press  DTV or 
b  to access the DTV mode. 
Press  DTV MENU  and the DTV Menu screen 
displays.
Press  c/
d  to select the desired menu, and 
then press  OK if necessary.
•  From this point, menu operations differ depending on 
the item you are going to adjust. See the respective 
section of the menu operation.
•  You cannot select any DTV-related menu items  unless “Auto Installation” has been completed.
• Press  RADIO to switch between DTV and Radio 
mode.
•  To exit the current screen without saving the change,  press  END.
1
2
3
DTV MENU /  Language
SelectOKENDDTV MENU
1 34 6
5
2
7
 
						

							
 24
DTV menu operations
About using the character set 
screen
In some cases you may be prompted to enter 
characters. See below for details.
Sample Alpha Numerical Character Set screen
Alpha Numerical Character SetSelect
FAV!~#$%&‘ ( ) *
+ , - . / 012345
6789 ; : ?@
ABCDE FGH I J K
LMNOPQR S T U V
WX Y Z [ \ ] ^ ` = a bcde f gh i j k l
mn o p q r s t u v w xyz
OKEND0...9
1  Input area
2  Space
  To add or overwrite with a space.
3   Character select area
4  YELLOW (Select) 
button
  Press to move between the input area and character
 select area.
5  
a/
b /
c /
d  button
  Press to move the cursor.
6  OK
 button
  While in the input area:
  Confi rms the new name. 
 Once  OK is pressed to confi rm, a confi rmation 
message displays.
 Press  c/
d  to select “Yes”, and then press 
OK.
  While in the character select area:
  Confi rms the input of a character.
Sample operation using Alpha Numerical 
Character Set
Call up the character set screen while in the 
“Label” or “Carrier Setup” screen. (Pages 26 
and 27)
Press  YELLOW (Select)  to move the cursor to 
the character select area.
Press  a/
b /
c /
d  to select the desired 
character, and then press  OK. Repeat until the 
new name is fully entered.
•  Use space to add a space or overwrite.
To register the new name, press  YELLOW 
(Select)  to move the cursor back to the input 
area.
Press  OK.
•  A confi rmation message displays.
Press 
c/
d  to select “Yes”, and then press 
OK.
1
2
3
4
5
6
Programme Setup
Confi gure various settings for each service. Press the 
preassigned 
 -  numeric buttons to access each 
of the functions explained below.
 Press  OK while the cursor is on “Programme 
Setup”.
Sample Programme Setup screen
Programme Setup
S.No Services
001 BBC
002 BBC News
003 BBC 1
004 BBC 2 Lock Skip
EraseMoveFav
1
1. Fav
3. Move
5. Skip
7. Erase
9. View
2. Lock
4. Move To
6. Select
8. Label
Select
0...9OKENDRADIODTV MENUTV/Radio
Basque
Catalan
Croatian
Czech
Danish
Dutch
English*
Finnish
French
Gaelic*
Gallegan
German Greek
Italian
Norwegian
Polish
Portuguese
Russian
Serbian
Slovak
Spanish
Swedish
Turkish
Welsh*
Available language list
* Languages available for MHEG5 service
Language
Select language settings for audio (if a programme is 
broadcast in more than one language) and MHEG5 
service.
Press  OK while the cursor is on “Language”.
Press  a/
b  to select “1st Pref. Audio”, “2nd 
Pref. Audio”, “3rd Pref. Audio” or “MHEG”.
Select a desired language for each item.
NOTE
•  See page 17 to change the language displayed on-screen.
•  See page 32 to change the subtitle language.
•  See page 32 for details on the MHEG5 service. 
1
2
3
NOTE
•  The picture window shows a blank image if Radio services 
are listed.
1
3
5 6
4 2
 
						

							
 25
DTV menu operations
Favourite
Assign services to 4 different favourite groups.Press  a/
b  to select the desired service.
Press 
 on the remote control. A selection box 
displays.
Press  a/
b  to register the selected service to 
any of the 4 favourite groups (None, Fav 1 ... 
Fav 4) and then press  OK. An icon displays 
indicating the favourite status.
• Do not press  END to exit the screen here if you wish 
to register the change.
Press  OK.
Now you can easily select your favourite service 
from the Programme List. (Page 31)
NOTE
•  You cannot register the same service to two different  favourite groups.
Lock
When the service is locked, you must enter your PIN 
whenever you tune to the service.
Press  a/
b  to select the desired service.
Press 
 on the remote control.
  If you have already set the PIN, enter it here. If  not, enter the factory preset PIN “1234”.
  An icon displays indicating the service is locked.
• Pressing  will turn the lock icon on and off. (PIN 
entry is required when lifting the lock icon.)
• Do not press  END to exit the screen here if you wish 
to register the change.
Press  OK.
NOTE
•  See page 17 for setting the PIN.
Move
Sort the order of the selected service by moving the 
service position.
Press  a/
b  to select the desired service.
Press 
 on the remote control. An icon 
displays indicating the service to be moved.
• Pressing  will turn the move icon on and off.
Move the selected service to the desired 
position using  a/
b , and then press 
OK.
• Do not press  END to exit the screen here if you wish 
to register the change.
Press  OK to register the change.
EXAMPLE:
Moving “002 ZDF” ahead of “001 ARD”.
Default order: Press 
a/
b  to select the desired service in 
001 rs 002
rs 003
rs 004.
Sorted order: Press  a/
b  to select the desired service in 
002 rs 001
rs 003
rs 004.
1
2
3
4
5
1
2
3
1
2
3
4
Move To
Use this function to change the position of two selected 
services
Press  a/
b  to select the desired service.
Press 
 on the remote control.
Enter the number using 
 -  numeric 
buttons, and then press  OK. The positions of 
the selected services are switched.
•  Do not press  END to exit the screen here if you wish 
to register the change.
•  You cannot enter a service number that is not listed.
Press  OK again, the message “Successfully 
updated” displays. The change is now 
registered.
1
2
3
4
Skip
Services that are set to skip will not be picked up when 
pressing  P (
s /
r )
.
Press  a/
b  to select the desired service.
Press 
 on the remote control. An icon 
displays indicating the service to be skipped.
• Pressing  will turn the skip icon on and off.
•  Do not press  END to exit the screen here if you wish 
to register the change.
Press  OK.
NOTE
•  To view services that are set to be skipped, use 
 -  
numeric buttons or select from the Programme List.
1
2
3
002 ZDF
001 ARD
003 SAT. 1
004 RTL001 ARD
002 ZDF
003 SAT. 1
004 RTL
s s
001 ZDF
002 ARD
003 SAT. 1
004 RTL001 RTL
002 ARD
003 SAT. 1
004 ZDF
 
						

							
 26
DTV menu operations
Installation
This section describes how to reconfi gure the DTV 
settings after conducting Initial auto installation 
(DTV)  on page 8.
Carrier Scan
Manually add a new carrier by entering the desired 
carrier number or frequency band.
Press  c/
d  to select “Installation”.
Press  a/
b  to select “Carrier Scan”, and then 
press  OK.
  If you have already set the PIN, enter it here. If  not, enter the factory preset PIN “1234”.
1
2
Auto Installation
The TV automatically detects and stores all available 
services in your area. See  Initial auto installation 
(DTV)  on page 8 for details.
NOTE
•  If the TV detects a new carrier/service that has become 
available after performing “Auto Installation”, the message 
“Do you want to save?” displays. 
 Press  c/
d  to select “Yes” or “No”, and then press 
OK.
Carrier Scan
Select
Ch-35
554000
Channel
Frequency (kHz)
0...9OKENDDTV MENU
Press 
a/
b  to select “Channel”, then 
c/
d  to 
enter the carrier number, and then press  OK.
•  The frequency of the selected carrier in the below cell 
changes correspondingly.
After the scan is complete, the screen shows all 
available services for the selected range.
A confi  rmation message displays. Press 
c/
d  
to select “Yes”, and then press  OK to save the 
change.
NOTE
•  You can directly enter the frequency instead of step 3. In 
this case, select “Frequency (kHz)”, enter the number using 
 -  numeric buttons, and then press  OK. Use 
c/
d  
to move between the digits.
•  After performing “Carrier Scan”, the order stored by using  the “Move” function will revert to the default order.
•  See page 17 for setting the PIN.
3
4
5
Select
Use this function to jump to the specifi c service in 
one step. This is useful when there are many services 
displayed on screen to scroll through.
Press 
 on the remote control. Now you can 
change the service number on the left side of 
the screen.
Enter the number using 
 -  numeric 
buttons, and then press  OK. The highlight 
moves to the selected service.
Erase
Erase the selected service(s) from the memory. 
Press  a/
b  to select the desired service.
Press 
 on the remote control. An icon 
displays indicating the service to be erased.
• Pressing  will turn the erase icon on and off.
• Do not press  END to exit the screen here if you wish 
to register the change.
Press  OK.
•  A confi rmation message displays.
Press 
c/
d  to select “Yes”, and then press 
OK.
Label
Change individual service names.
Press  a/
b  to select the desired service.
Press 
 on the remote control. A character set 
screen displays.
Enter new name for the service. See page 24 for 
operations using the character set screen.
View
Tune to the service shown in the picture window.
Press  a/
b  to select the desired service.
Press 
 on the remote control.
•  The image shown in the picture window changes.
Press  END to exit the Programme Setup screen 
to view the image in full screen.
1
2
1
2
3
4
1
2
3
1
2
3
 
						

							
 27
DTV menu operations
Carrier Setup
This is provided for you to rename (label), erase, or re-
scan carriers. “Carrier” in this context refers to a service 
station that provides a set of individual services.Press  c/
d  to select “Installation”.
Press  a/
b  to select “Carrier Setup”, and then 
press  OK.
  If you have already set the PIN, enter it here. If  not, enter the factory preset PIN “1234”.
1
2
Carrier Setup
S.No Carrier Name
001 Frequency TV Radio
BBC 538000 05 03
002 BBC 546000 06 08
003 Canal+ 554000 04 00
004 Digital5 592500 06 02
Select
OKENDDTV MENU
LabelEraseRescan
System Setup
Confi gure On-Screen Display and Child Lock settings.
OSD Setup
The On-Screen Display appearance and the position/
duration of the service banner information can be 
customised.Press  c/
d  to select “System Setup”.
Press  OK.
1
2
OSD Setup 
Select 
OK END DTV MENU 
4 Secs 
Bottom  20%
Banner timeout 
Banner position 
Transparency 
1
 
To rename the selected carrier:
  Select the carrier, and then press  RED (Label). 
  The character set screen displays.
  Enter a new name for the carrier. See page 24 for  details on using the character set screen.
2  
To erase the selected carrier:
  Select the carrier, and then press  GREEN (Erase). 
  An icon displays indicating the carrier to be erased. 
 Pressing  GREEN will turn the erase icon on and off. 
 Press  OK. 
  A confi rmation message displays. 
 Press  c/
d  to select “Yes”, and then press 
OK.
3  
To re-scan the selected carrier:
  Select the carrier, and then press  BLUE (Rescan).
 Re-scanning starts.
  A confi rmation message displays. 
 Press  c/
d  to select “Yes”, and then press 
OK.
NOTE
•  After re-scanning the selected carrier, the order stored by  using the “Move” function will revert to the default order.
Press  a/
b  to select the desired item.
Press  c/
d  to select the desired parameter, and 
then press  OK.
A confi  rmation message displays. Press 
c/
d  
to select “Yes”, and then press  OK to save the 
change.3
4
5
Selectable 
items
1 Sec/2 Secs/
... 7 Secs/None
Top/Bottom
None /10% 
/20%/...50%
OSD Setup 
items
Banner 
timeout
Banner 
position
TransparencyDescription
Select how long the service 
banner information appears 
on screen.
Select whether the service 
banner information appears 
on top or bottom of the 
screen. 
Select the desired level 
of On-Screen Display 
transparency.
 
						

							
 28
DTV menu operations
Child Lock
This function allows TV and Radio services to be 
restricted. It prevents children from watching violent or 
sexual scenes that may be harmful.Press  c/
d  to select “System Setup”.
Press  a/
b  to select “Child Lock”, and then 
press  OK.
If you have already set the PIN, enter it here. If 
not, enter the factory preset PIN “1234”.
Press  c/
d  to select the desired age/rating (4 
...18/Universal/Parental/X-rated/None), and then 
press  OK.
1
2
3
4
NOTE
•  “Universal” and “Parental” are the ratings used exclusively \
in France.
•  “X-rated” is the rating used exclusively in Spain.
•  For details about ratings see page 35.
Accessories
Check the version information of the digital module and 
allow it to be upgraded (when available).
Software Version
Press  c/
d  to select “Accessories”.
Press  OK.
•  The software version is displayed.
1
2
Software Upgrade
The software for controlling the built-in DTV decoder 
can be upgraded when necessary. In Great Britain this 
can be achieved via an Over Air Download. 
Preparation
Confi rm and make a note of the current software 
version number as in step 2 of  Software Version.
Manual upgrade Press  c/
d  to select “Accessories”.
Press  a/
b  to select “Software Upgrade”, and 
then press  OK. The TV checks all carriers if 
there is a new software available for upgrade. 
1  
If upgrade via Over Air Download is available 
at the time:
  A confi rmation message appears asking you to  accept the upgrade or not.
  To download now, press  c/
d  to select “Yes”, and 
then press  OK. After the upgrade is completed, 
the TV restarts automatically with the new software 
version installed.
  To postpone the download, press  c/
d  to select 
“No”, and then press  OK. Enter the download time 
for more convenient time as instructed.
  The software upgrade will not be carried out if  there is no new software available at the specifi ed 
download time. 
2  
If upgrade via Over Air Download is NOT 
available at the time:
  A message tells you that there is no software  available to be downloaded.
Check the new software version number to 
confi  rm the successful upgrade.
Auto upgrade
When you tune to the service that provides the 
upgrade via Over Air Download, a confi  rmation 
message displays. 
Follow the screen prompts.
Check the new software version number to 
confi  rm the successful upgrade.
NOTE
•  To scan all carriers for upgrade availability, perform the  
manual upgrade. 
•  The software upgrade may take about 30 minutes, but may  take longer (up to 1 hour) depending on the signal status. 
While updating, you cannot switch to TV or external input 
mode or enter standby mode using  B on the remote 
control unit.
CAUTION
•  Do not cut off the power to the TV in any way when 
the software upgrade is in progress, as this may 
cause the upgrade to fail. If problem arises ask a 
qualifi  ed service personnel before the software 
upgrade period expires.
1
2
3
1
2
3
Child Lock
Select
7
Age/Rating
OKENDDTV MENU