Sharp Lc 52xd1e Operation Manual

 9
Press a/
b /
c /
d  or  -  to select the 
desired station in the station list, and then press 
OK  to tune in the station.
• Press  Blue to sort the list according to “Alphabetical”  
or “Numerical”.
•  Refer to the following table for how each numeric  button is assigned a set of characters.
To delete, move, and rename stations from 
the station list
  While in the station list, press  Yellow (Change 
stations).
E  Delete
  Select a station to delete, and then press  Red 
(Delete). Mark more...

 10
VIDEO
S-VIDEO
L-AUDIO-RAV OUTPUT
Using external equipment
Setting the input source
To view external source images, 
select the input source using 
b on 
the remote control unit. (Page 19)
NOTE
•  The cables marked with * are 
commercially available items.
•  TV-OUT from EXT 1 outputs DTV  image when DTV is selected as the input. 
Otherwise it constantly outputs analogue TV image.
•  MONITOR OUTPUT from EXT 2 outputs audio only when  EXT 4, 5 and 6 is selected as the input.
Connecting a VCR
You can...

 11
Using external equipment
NOTE
•  The cables marked with * are commercially available items.
•  The PC input terminals are DDC1/2B-compatible.
•  Refer to page 34 for a list of PC signals compatible with the TV.
•  Macintosh adaptor may be required for use for some  Macintosh computers.
•  When connecting to a PC, the correct input signal type is  automatically detected. 
This TV incorporates four typical AV Link functions 
for smooth connections between the TV and other 
audiovisual equipment.
One...

 12
Menu operations
On-Screen Display
Example
 Item highlighted in yellow•  This indicates the item currently selected.
 Item displayed in white•  This indicates an item can be selected.
NOTE
•  Some menu items do not appear as explained in this  manual depending on the selected parameter, input mode 
or the type of signal received.
•  The screens in the operation manual are for explanation  purposes (some are enlarged, others cropped) and may 
vary slightly from the actual screens.
Common operations...

 13
Picture menu
Various picture-related settings can be optimised.
TitleB
NOTE
•  Items with * can be adjusted and reset for each individual AV mode.
•  Items with ** appear only when “PC (RGB)” for EXT 4 is  selected under “Input select”.
• Press  a/
b  to select “more...” and then press 
OK, if the 
item you want to adjust is not displayed.
Backlight*
Dims or brightens the screen.
Contrast*
The contrast settings depend on the brightness of the 
room. The brighter the surroundings the higher the...

 14
Film mode
Automatically detects a fi lm-based source (originally 
encoded at 24/25 frames/second, depending on the   
vertical frequency), analyses it and then recreates each 
frame for fi lm-like picture quality.
truD(R)
“truD(R)” ensures you steady motion instead of edgy 
movements and juddering. It further improves the 
image quality by enhancing contrast and sharpness 
with advanced video algorithms. When entering the 
“truD(R)” menu, you can only switch the juddering 
correction on/off. The...

 15
Menu operations
Connections menu
TV menuHDMI setup
Supply voltage
AV-Link
Miscellaneous Setup
Connections
Input select Decoder
no (0V) EXT 2
Decoder
Make sure to select the terminal (EXT 1 or 2) to which 
the decoder is connected.
NOTE
•  This setting will be refl ected in the “Decoder stations” function under “Miscellaneous”. (Page 16)
Input select
For setting the signal type of external equipment.
NOTE
•  If no (colour) image displays, try to change the other signal type.
•  Check the operation...

 16
Supply voltage
Antennas with an integrated amplifi er need a supply 
voltage on the antenna line. (Page 4)
AV-Link (EXT 2 only)
With this function you can transfer the station data of 
the TV (such as station preset number/name/channel/
frequency) to the recorder if the recorder is set up for 
AV-Link. This function is available only for conventional 
analogue stations.Press  MENU  and the menu screen displays.
Press  c/
d  to select “Connections”, and then 
press  OK.
Press  a/
b  to select...

 17
Menu operations
E Manual tune
Use the manual tune option when receiving TV signal 
whose TV/Colour standard deviate from the one 
specifi ed already. However, this requires detailed 
knowledge.
Press  MENU  and the TV menu screen displays.
Press  c/
d  to select “Setup”, and then press 
OK .
Press  a/
b  to select “Channels”, and then 
press  OK.
Press  a/
b  to select “Manual tune”, and then 
press  OK.
Now enter the necessary setting parameters for 
each menu item.
•  For “Channel” and “Frequency”,...

 18
Miscellaneous
E No signal off
When set to “Enable” the TV will automatically enter the 
standby mode if there is no signal input for 6 minutes.
Menu operations
TV menu ->Setup
Time and dateMiscellaneous
Channels Child lock 
On-screen displays No signal off Enable Disable
Geometry menu
You can set the geometry values of the picture such as 
picture position and phase relation. The adjustments 
are stored independently for each input mode.
Picture
TV menu
Picture horizontal
Picture vertical
Phase...