Sharp Lc 52d65e Operation Manual

Connecting external devices
Inserting a CA Card
In order to receive coded digital stations, a Common 
Interface Module (CI Module) and a CA Card must be 
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealers.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact 
chip facing the side of the CI Module marked 
with the provider’s logo, push the CA Card 
into the CI Module as far...

AQUOS LINK
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you 
can interactively operate compatible system devices (AV amplifier, DVD player/recorder, 
Blu-ray player/recorder) using a single remote control unit.
NOTE
AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS Recorder are scheduled 
to be on sale after the release of this TV (as of September 2008).
What you can do with AQUOS LINK
One Touch...

AQUOS LINK
AQUOS LINK Control
Set to “On” to enable HDMI CEC functions. When 
turning on the power while “AQUOS LINK Control” is 
set to “On”, the connected HDMI devises’ power will 
be turned on in conjunction with the TV.Press  MENU  and the “MENU” screen displays.
Press  c/d  to select “Option”.
Press  a/b  to select “AQUOS LINK Setup”, and 
then press  OK.
Press  a/b  to select “AQUOS LINK Control”, 
and then press  OK.
Press  c/d  to select “On”, and then press  OK.
Auto Power On
If this is...

AQUOS LINK
Open the remote control unit’s flip cover, and 
then press OPTION.
Press  a/b  to select “Setup Menu”, and then 
press  OK.
NOTE
If a connected device does not have this function or the 
device is in a status where the menu cannot be displayed 
(recording, entering standby, etc.), this function may not be 
available.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the 
AQUOS BD Player/AQUOS Recorder. Open the remote control unit’s flip cover, and 
then...

Menu operation
1
Picture 
Contrast OPC [Off] 
Brightness
Colour
Tint
Sharpness
Advanced
Reset [+30] 
[0] 
[0] 
[0] 
[0] 
0 
–30 
–30 
–30 
–10  +40 
+30 
+30 
+30 
+10 
Backlight [+14] –16 
+16 
DYNAMIC
ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer [Off]
[Disable]
[Disable]
Analogue Search
Digital Search
3
2
NOTE“MENU” options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged,...

Basic adjustment
NOTEWhen set to “On”, the TV senses the surrounding light and 
automatically adjusts the backlight brightness. Make sure 
no object obstructs the OPC sensor, which could affect its 
ability to sense surrounding light.
• This TV provides various advanced functions for optimising 
the picture quality.
Film Mode
Active Contrast
DNR
3D-Y/C
Monochrome
Y
G
C
B
M[    0]
[    0]
[    0]
[    0]
[    0]f
30
f 30
f 30
f 30
f 30e30
e 30
e 30
e 30
e 30
Range of OPC
C.M.S.-Hue
This function adjusts...

Basic adjustment
NOTEThe item marked with * is available only when selecting 
“HDMI1”, “HDMI2”, “HDMI3” or “EXT4” from the “INPUT 
SOURCE” menu.
The item marked with ** is available only when accepting 
an “x.v.Colour” signal through an HDMI terminal.
For input source “USB”, you can only select “USER (USB)”, 
“DYNAMIC (Fixed)”, “DYNAMIC” and “STANDARD”.
•
•
•
Monochrome
For viewing a colour video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s 
automatic adjustments can be...

Power Save Settings
ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer  [       Standard]
[Disable] 
[Disable]
Basic adjustment
No Signal Off
ECO
When set to “Enable”, the TV will automatically enter 
standby mode if there is no signal input for 15 minutes.
Five minutes before the TV enters standby mode, the 
remaining time displays every minute.
NOTEEven if a TV programme finishes, this function may not 
operate because of interference from other TV stations or 
other signals.
•
•
Energy Save...

Channel Settings
Auto Installation
Basic adjustment
Auto Installation
Setup
The TV automatically detects and stores all available 
services in your area. This function also allows you to 
perform the channel setting for digital and analogue 
individually and reconfigure the settings after the initial 
auto installation has been completed.After selecting “Yes” on the screen, you can set 
language and channel search the same as in the 
initial auto installation. Follow steps 2, 5 and 6 
on page 9.
NOTE...

Basic adjustment
Channels with “Skip” set to “On” are passed over 
when using Pr /s  even if selected while watching 
the image from the TV.
When connecting a decoder to the TV, you need to 
select “EXT1” or “EXT2”.
NOTE
The factory preset value is “Off”.
•
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has\
 
been activated” displays, and the image and sound of the 
channel are blocked.
When pressing  6 while...