Sharp Lc 42x20e Operation Manual

LC-42X20E
LC-42X20S
LC-46X20E
LC-46X20S
LC-52X20E
LC-52X20S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRANCRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD

SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
TINS-D181WJN107P08-PL-NG
LC-42X20E/LC-46X20E/LC-52X20E
LC-42X20S/LC-46X20S/LC-52X20S...

SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the 
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 

 or 
ASA
 and of the same rating as above, 
which is also indicated on the pin face of the plug, must be used.
Always refi t the fuse cover after replacing the fuse. Never use the plug without the fuse cover fi tted.
In the unlikely event of the socket outlet in your home not being...

OPERATION MANUAL
Contents ...............................................................\
..........................1
Introduction ........................................................................\
............2
Dear SHARP customer .............................................................2
Important Safety Precautions ....................................................2
Trademarks ..............................................................\
.................2
Remote control...

•  “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
Introduction
•  Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
•  Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,  swimming pool and in a wet basement.
•  Do not place vases or any other water-filled...

Introduction
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
12
13
14 1
1 
B (Standby/On)  (Page 10)
2  Buttons for useful operations
  m (Teletext)
 
ATV: Display analogue teletext. (Page 14)  DTV: Select MHEG-5 and teletext for DTV.  (Page 14)
 k  (Reveal hidden Teletext)  (Page 14)
 [  (Subtitle)
  ATV/DTV/External: Switch subtitle  languages on/off. (Pages 14 and 28)
  3 (Freeze/Hold)
  Press to freeze a moving image on the  screen.
  TELETEXT: Stop updating Teletext pages  automatically or...

Introduction
2 
3 
4 
12 
13 
16 
6 7 8 9 10 11 
1 
15 
14 
5 
1  AC INPUT terminal
2   EXT 3 terminals
3   EXT 4 (HDMI) terminal
4  Headphones
5  SERVICE socket 6
  EXT 1 (RGB) terminal
7   EXT 2 (RGB) terminal
8   EXT 8 (COMPONENT/AUDIO) terminals
9  Antenna terminal
10   OUTPUT (AUDIO) terminals
11   DIGITAL AUDIO OUTPUT terminal 12
  COMMON INTERFACE slot
13  RS-232C terminal
14   EXT 5 (HDMI) terminal
15   EXT 6 (HDMI/AUDIO) terminals
16   EXT 7 (ANALOGUE RGB/AUDIO) terminals
TV (Front view)
TV...

Preparation
Supplied accessories
Attaching the stand unit
•  Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•  Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•  Attach the stand in the correct direction.
•  Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Insert the stand into the openings on the  
  bottom of the TV. (Hold...

Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries\
 (supplied). When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.Open the battery cover.
Insert two supplied “AAA” size batteries.•  Place batteries with their terminals corresponding to the ( k) and ( l) indications in the battery 
compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result...

Quick guide
Initial installation overview
Follow the below steps one by one when using the TV for the first time. \
Some steps may not be necessary 
depending on your TV installation and connection.
Preparation
n  Connect antenna cable to the antenna terminal. (Page 8)
o  If necessary, insert CA card into the CI slot to watch 
scrambled broadcasts. 
(Pages 8 and 19)
p  Connect the AC cord to the TV. (Page 8)
n  Turn on the TV power with  a. 
(Page 10)
o  Run the initial auto installation.  (Page 9)
✔...

Before turning on the power
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order to 
receive digitally/terrestrially broadcast stations after 
connecting the antenna cable to the antenna input 
terminal on the back of your TV.
1. Press  MENU  and the menu screen displays.
2.  Press  c/d  to select “Setup”.
3.  Press  a/b  to select “Aerial Setup-DIGITAL”, and 
then press  OK.
4.  Press  a/b  to select “Supply Voltage”, and then 
press  OK. 
5.  Press  c/d  to select...