Sharp Lc 42rd2e Operation Manual

9
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or the TV.
NOTE
• The cables marked with * are commercially available items.
Connecting a VCR
You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.
NOTE
• TV-VCR advanced AV Link...

6
Remote control unit
Quick guide
117
18
19
20
21
22
23
24
25
26
27
29 28
30
31
32
33 4
5
15
166
7
8
9
10
11
12
13
143 2
1
(Teletext)
Select the TELETEXT mode. \(All TV
image, DTV/DA
image, TV/TEXT image\) \(See pages 21
and 31.\)
DTV
TELETEXT
2 (Standby/On)
Enter standby mode or tur
power
3 (Freeze/Hold)
\(See page 21.\)
4 (Subpage)
\(See page 21.\)
5 (Flashback)
Pr
in nor
while operating in EPG/ESG scr
6 EPG
DTV
Pr
7 DTV
Pr
watching other input sour
versa.
\(This button will not work if you wer...

11
MENU    [
Option ... 
Colour System]
Option
Audio Only
DNR
Input Select
Colour System
[Off]
[CVBS]
[AUTO]
Menu operations
On-Screen Display
Example
1Item displayed in white
• This indicates an item can be selected.
2Item displayed in yellow
• This indicates the item currently selected.
3Item in brackets
• This indicates the current setting for the item.
4Item with 4 displayed in grey
• This indicates the item cannot be selected for various
reasons.
NOTE
• Menu options differ in the selected input...

12
MENU    [
Picture]
PictureAudio
Contrast OPC AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset[+30]
[0]
[0]
[0]
[0]0
0 –30
–30
–30+40
+30
+30
+30
+10
Backlight [+6] –8+8
Menu Operation: B
1Press MENU and the MENU screen displays.
2Press c/d to select the desired menu.
3Press a/b to select the desired menu item
(Example: Backlight, Contrast, etc.).
4Press c/d to adjust the item to your desired
position.
• Select “Reset” to reset all adjustment items to the
factory preset values....

13
Picture menu
TitleB Menu operations
MENU    [
Picture]
PictureAudio
Contrast OPC AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset[+30]
[0]
[0]
[0]
[0]0
0 –30
–30
–30+40
+30
+30
+30
+10
Backlight [+6]–8+8
NOTE
• You can also select AV Mode options by pressing AV
MODE on the remote control unit.
• You can adjust the factory preset parameters given in
“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.
• The items marked with * are only...

14
Menu operations
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
3D-Y/C
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving
images.
Slow: Set the optimum image quality for slow-moving
images.
NOTE
• 3D-Y/C may not operate depending on the input signal
type or noisy...

15
Setup menu
Menu operations
MENU    [
Setup]
SetupOption
Child Lock Auto Installation
Programme Setup
Position
WSS
4:3 Mode [Panorama][On]
[Off (0V)] Supply Voltage[English] Language
Power Management
Menu Operation: A (page 12)
When set, the TV will automatically enter the standby mode.
Off:• No power management
• Factory preset value.
Mode1:• If there is no signal input for 8 minutes, the TV
enters the standby mode.
• Even if you start using the PC and the signal
inputs again, the TV stays in standby...

16
Menu operations
Programme Setup
This section describes how to set up analogue TV
channels manually.
Auto Search
You can automatically search for and download TV
channels  by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1Repeat steps 1 to 4 in Programme Setup.
2Press c/d to select “Ye s”, and then press OK.
1Programme auto search
2Auto labelling
3Auto sorting
4Preset download
1Press MENU and the MENU screen displays....

17
4Enter the 4-digit number as a PIN using 0 – 9.
5Enter the same 4-digit number as in step 4 to
confirm.
• “The system PIN has been changed successfully”
displays.
NOTE
• To view a locked channel, you must enter a PIN. (See this
page and page 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
Resetting the PIN
Allow you to reset your PIN to the factory preset “1234”.
1Repeat steps 1...

18
Menu operations
WSS signal 4:3 screen
4:3 mode “Panorama” 4:3 mode “Normal”
4:3 Mode
Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
TV/DTV/AV only
Item
Fine Sync.
Menu Operation: C (page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed...