Sharp Lc 40le705 Operation Manual

LC-32LE700E LC-32LE700S
LC-40LE700E LC-40LE700S
LC-46LE700E LC-46LE700S
LC-52LE700E LC-52LE700S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDOOPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION...

SPECIAL NOTE FOR USERS IN THE U.K.The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A 
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  or ASA 
and of the same rating as above, which is also indicated on the pin face\
 of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compat\...

1
OPERATION MANUALENGLISH
The illustrations and the OSD in this operation manual are for 
explanation purposes and may vary slightly from the actual 
operations.
The examples used throughout this manual are based on the 
LC-46LE700E model.
LC-32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E, 
LC-32LU700S, LC-40LE700E, LC-40LE700S, LC-40LX700E, 
LC-40LU700E, LC-40LU700S, LC-46LE700E, LC-46LE700S, 
LC-46LX700E, LC-46LU700E, LC-46LU700S, LC-52LE700E, 
LC-52LE700S, LC-32LE705E, LC-32LE705S, LC-32LX705E,...

2
Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use 
liquid cleaners or aerosol cleaners.
•
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. 
Chemicals may cause damage or cracks in the cabinet of the TV.
•
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming...

3
Remote control unit
B (Standby/On)
(Page 12)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext 
(Page 15).
DTV: Select MHEG-5 and teletext 
for DTV (Page 15).
k (Reveal hidden teletext)
(Page 15)
[ (Subtitle)
Switch subtitle languages on/off 
(Pages 15 and 32).
3 (Freeze/Hold)
Press to freeze a moving image on 
the screen.
Teletext: Stop updating teletext 
pages automatically or release the 
hold mode.
1 (Subpage)
(Page 15)
v (Top/Bottom/Full)
Set the area of magnification in...

4
TV (front view)
2345
6
1
7
8
9
10
Blue illumination LED
B (Standby/On indicator)
OPC indicator
Remote control sensor
OPC sensor
a (Power button)
@ (Menu button)
b (Input source button)
:r/s (Programme [channel] 
buttons)
i+/- (Volume buttons)
1
2
3
4
5
6
7
8
9
10
TV (rear view)
1
2
6
8
11
12
14
13
15
16171819
9
10
3
4
5
7*1
*2
COMMON INTERFACE slot
USB terminal
HDMI 4 (HDMI) terminal
EXT 9 (VIDEO/AUDIO) terminals
Headphones
AC INPUT terminal
MAIN POWER switch
HDMI 3 (HDMI) terminal
HDMI 1 (HDMI)...

5
Supplied accessories
Remote control unit ( x 1) AC cord ( x 1)Cable clamp ( x 1)Stand unit ( x 1)
Product shape varies in 
some countries.
For 32 inch models
For 40/46/52 inch models
Pages 3 and 6 Page 8Page 8Page 5
Operation manual (this publication)
“AAA” size zinc-carbon battery ( x 2) ... Page 6
•
•
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying...

6
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size \
zinc-carbon batteries. When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size zinc-carbon 
batteries.
Place batteries with their terminals corresponding to the (e) 
and (f) indications in the battery compartment.
Close the battery cover.
1
2
•
3
CAUTIONImproper use of...

7
Initial installation overview
Follow the steps below one by one when using the TV for the first time. \
Some steps may not be necessary depending 
on your TV installation and connection.
Preparation
Connect an antenna cable to the 
antenna terminal (Page 8).
If necessary, insert a CA 
card into the CI slot to watch 
scrambled broadcasts (Page 11).
Connect the AC cord to the TV 
(Page 8).
Product shape varies in some countries.



Run the initial 
settings
Turn on (;) the MAIN POWER 
switch on the...

8
Before turning on the power

2*

1


Cable clamp (bundle the cables with the clamp)
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
Turn on (;) the MAIN POWER switch on the left side of the TV.
AC cord (product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type 
causes unnecessary electrical wave emissions or interference.




*
Place the TV close to the AC outlet, 
and keep the power plug within 
reach.
Supplying...