Sharp Lc 32dh57 Operation Manual

 19
Basic adjustment
Type
Audio
ItemNormalAudio stream is output normally.
Audio Description Selecting this item enables you to adjust the 
settings for the visually impaired (see below).
Hard of Hearing Audio for the hearing impaired is output on the 
TV speakers by default when the programme 
contains audio information.
Audio Description
Audio
Available only when you set “Audio Description” in the 
“Type” menu above.
Item
Speaker
When set to “On”, audio for the visually impaired 
is output from the TV...

 20
Basic adjustment
Power Save Settings
ECO
Energy Save
No Signal Off [Disable] [Disable]
[Standard]
No Operation Off
Energy Save
ECO
This function enables you to automatically reduce the 
backlight brightness in order to decrease the power 
consumption and increase the backlight life span.
Item
Off The backlight brightness is the same value of 
your settings in the selected “AV MODE”.
Standard Reduces the backlight brightness by 20 %.
Advanced Reduces the backlight brightness by 30 %.
NOTEThis...

 21
Basic adjustment
Additional Search
Use this menu to add new channels automatically after 
auto installation has been completed.
Channel Edit
This menu allows you to reconfigure some settings for 
the channel currently selected.
Label
When a TV channel sends its Network Name, the “Auto 
Installation” detects the information and assigns a 
name to it. However, you can change channel names 
individually.
Press a/b/c/d  to select each character 
of the new name for the channel, and then 
press  ;....

 22
Basic adjustment
Password/Parental lock settings
Child Lock
Setup
Allows you to use a PIN to protect certain settings from 
being accidentally changed.
NOTEPIN input is required when executing “Child Lock”. The default 
PIN is “1234”. To clear the PIN setting (PIN input will no longer 
be needed), refer to CLEARING THE PIN  (Page 24).
Change PIN
Register a four-digit password number to use the “Child 
Lock” function.
Enter the four-digit number as a PIN using 
0_ 9 numeric buttons.
Enter the same...

 23
Useful viewing functions
Selecting the picture size
You can select the picture size. Selectable picture size 
varies with the type of signal received.
Item (for SD [Standard-Definition] signals)
AutoThis mode allows the TV to switch automatically 
among the different picture sizes.
Normal Keeps the original aspect ratio in a full screen 
display.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar 
appears on each side, and you may also 
see bars on the top and bottom with some 
programmes....

 24
Other useful features
Setting when using external 
devices
Input source settings
Input Label
Setup
You can label each input source with a custom 
description.
Press b to select the desired input 
source.
Go to “MENU” > “Setup” > “Input Label”.
Press  a/b/c/d  to select each character 
of the new name for the input source, and 
then press  ;.
A
BACK CLEAR
END
K
U B
L
V C
M
W D
DVD
NX E
O Y F
P Z G
Q + H
R –_ I
S . J
T
0123456789
Repeat until the label is fully spelt out.
NOTE
The label can be six...

 25
Connecting a PC
Connecting a PC
HDMI Connection
PC HDMI 1, 2 or 3


HDMI-certified cablen
PC HDMI 2*

DVI/HDMI cableoø 3.5 mm stereo 
minijack cablep
When using the HDMI 2 terminal, you must select the proper 
item in the “PC Audio Select” menu depending on the type of 
HDMI cable connected (Refer to page 19 for details).
Analogue Connection
PC EXT 4*


RGB cableqø 3.5 mm stereo 
minijack cabler
PC EXT 4*
 
DVI/RGB conversion 
cablesø 3.5 mm stereo 
minijack cablet
When using the EXT 4...

 26
Connecting a PC
Adjusting the PC image 
automatically
This function enables the screen to be automatically 
adjusted to its best possible condition when the analogue 
terminals of the TV and PC are connected with a 
commercially available DVI/RGB conversion cable, etc.
Auto Sync.
Setup
NOTE“Auto Sync.” may fail if the PC image has low resolution, has 
unclear (black) edges, or is moved while executing “Auto 
Sync.”.
Be sure to connect the PC to the TV and switch it on before 
starting “Auto Sync.”....

 27
Connecting a PC
RS-232C port specifications
PC Control of the TVWhen a programme is set, the TV can be controlled 
from the PC using the RS-232C terminal. The input 
signal (PC/video) can be selected, the volume can be 
adjusted and various other adjustments and settings 
can be made, enabling automatic programmed 
playing.
Use an RS-232C serial control cable (cross type) 
(commercially available) for the connections.
NOTEThis operation system should be used by a person 
who is accustomed to using...

 28
Connecting a PC
PC compatibility chart
ResolutionHorizontal 
Frequency Vertical 
Frequency Analogue (D-
Sub) Digital (HDMI) VESA Standard
VGA 640 x 480 31.5 kHz 60 Hz
✔✔✔
SVGA 800 x 600 37.9 kHz 60 Hz ✔✔✔
XGA 1,024 x 768 48.4 kHz 60 Hz ✔✔✔
WXGA 1,280 x 768 47.7 kHz 60 Hz ✔✔
WXGA 1,360 x 768 47.7 kHz 60 Hz ✔✔✔
SXGA 1,280 x 1,024 64.0 kHz 60 Hz ✔✔
SXGA+ 1,400 x 1,050 65.3 kHz 60 Hz ✔✔
VGA, SVGA, XGA, WXGA, SXGA and SXGA+ are 
registered trademarks of International Business 
Machines...