Sharp Lc 20s5e Operation Manual

  9

 

Selected ItemDescription
ContrastTo adjust the contrast of PC Monitor screen.
BrightnessTo adjust the brightness of PC Monitor screen.
V-Pos.To adjust the vertical position of the image on the PC Monitor screen. Each video standard will require a different value for this setting.
H-Pos.To adjust the horizontal position of the image on the PC Monitor screen. Each video standard will require a different value for this setting. 
ClockTo minimize any vertical bars or stripes visible on the screen...

0  

 
Useful Features (continued)
Sound Mode Settings
You can make various sound mode settings.
  Perform steps   and 2 in Sound Adjustments to display the Sound Menu screen.
2	 Press	▲/▼	to	select	the	desired	item,	and	press	OK.
3	 Press	▲/▼	to	select	the	sound	mode,	and	press	OK.
4 Press END to exit.
Selected itemChoice
Loudsp. soundStereo  Mono Sound 1  Sound 2  Sound 1+2  MonoNicam  MonoMono
Auto vol.On  Off
Clear voiceOn  Off
Sound wideOn (For increasing the spread of the sound)...

  

 

Setup Settings
 Press MENU to display the Menu screen.
2	 Press	◀/▶	to	select	 “Setup”.
3	 Press	▲/▼	to	select	the	desired	item,	and	press	OK.
4	 Press	▲/▼	to	select	the	desired	mode,	and	press	OK.
5 Press END to exit.
Selected itemChoice/Description
ProgrammesSee page 12.
First installationSee page 8.
Wide modeSee page 13.
EXT connections It is possible to manually adjust various settings for connections with external devices on the “EXT connections” screen. Select the...

2  

 

[] Automatic searchPerform the procedure above to search for and store new TV programmes after the First Installation routine.
NOTE
You can change “Colour system” and “Sound system” only when “Other count.” is selected in “Country”.See page 8 for details on the search process.
[2] Manual adjustmentIndividual settings of programmes can be adjusted.
NOTE
Depending on the settings in the colour system of the channels, switching between channels may be slow. If you want to speed up...

  13

 
Useful Features (continued)
Using the Programme Table
The Programme table shows a list of all receivable programmes. They are located in channels 1 to 99.
To select the desired programme
1 Press OK to display the Programme table.
2	 Press 	 ▲/▼/◀/▶ 	 to 	 select 	 the 	 desired 	 programme.To display the next or previous list of the Programme table, 
press
	 ▲/▼ 	 when 	 the 	 cursor 	 is 	 at 	 a 	 programme 	 in 	 the 	 lower-right 	
or
	 upper-left 	 position, 	 or 	 press 	
◀/▶ when the...

4  

 

Child Lock
Important:
Please refer to page 19 for “IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK”.
The Child lock function blocks the viewing of any channels.To use this function, you need to define your PIN (Personal Identification Number) first.
[] Defining a PIN
  Press MENU to display the Menu screen.
2	 Press	◀/▶	to	select	 “Features”.
3	 Press	▲/▼	to	select	“Child	lock”,	and	press	OK to display the PIN input screen.
4 Input the desired four-digit PIN (e.g. 1234) with...

  5

 

■  What is Teletext?Teletext is an information service organised like a magazine, which is provided by some TV stations in addition to regular television broadcasting. Your LCD TV set receives special Teletext signals broadcast by a TV station, processes the information and displays it graphically on the screen. News, weather and sports information, stock exchange prices, programme reviews and closed captioning for people hard of hearing are among the many services available through...

16  

 

9 pin D-sub/MINI-DIN conversion cable(optional: AN-A1RS)
RS-232C serial control cable(cross type, commercially available)
Communication conditionsSet the RS-232C communications settings on the PC to match the TV’s communications conditions. The TV’s communications settings are as follows:
Baud rate:9,600 bps
Data length:8 bits
Parity bit:None
Stop bit:1 bit
Flow control:None
Communication procedureSend the control commands from the PC via the RS-232C connector.The TV operates according to the...

  7

 

ProblemCheck itemPage
There is no picture or sound. There is no picture from EXT3.
Reception other than that of broadcasting stations could be the problem.Make sure the input mode is set to TV.Make sure the main power switch of the LCD TV set is on.Make sure the Picture adjustment is properly adjusted.The fluorescent lamp may have reached the end of its service life.Make sure the S-VIDEO terminal has nothing connected. Make sure the volume is not set to minimum.Make sure the sound is not...

8  

 

Specifications
*  Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and 
temperature 	at 	25˚C.
■	As 	a 	part 	of 	policy 	of 	continuous 	improvement, 	SHARP 	reserves 	the 	right 	to 	make 	design 	and 	specification 	changes 	for 	the 	LCD 	TV 	set	
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some 
deviations from...