Sharp Esn70esa Manual

							$
Applying the Air Bubble Washing System.
$
Applying One-Touch Operation System.
$
Realizing calm washing through the innovational low-noise
design.
$
Before operating this washer, please read this instruction
completely. Thank you.
Full-Auto Electric Washing Machine
Model: ES-D159T-SL / ES-D159T-WH
A NOTE TO YOU
Thank you for buying a SHARP appliance.
SHARP washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.
INSTRUCTION MANUAL
CONTENTS Page
PARTS AND FEATURES ......................................2
WASHER SAFETY  ...............................................3
INSTALLATION INSTRUCTIONS..........................4
ELECTRICAL REQUIREMENTS ...........................5
INLET HOSE CONNECTION.................................6
OPERATING YOUR WASHER ..............................7
DESCRIPTION OF THE CONTROL PANEL .........8
WASHING PROCEDURE AND COURSE SELECTION...9
GUIDES FOR OTHER USEFUL PROGRAMS  ...11
GENERAL PROCEDURE FOR OPERATION .....12
WASHER MAINTENANCE ..................................13
HOW TO CLEAN THE FILTER ............................14
REMOVING STAINS............................................15
TROUBLE SHOOTING ........................................16
SPECIFICATION..................................................17
Your washer is adopted Ag+ Ion pulsator
that can sterilize your clothes and
deoderize bad smell.
Your washer is equipped with the bubble
generator that generates a great deal of
air bubble.
The air bubbles knock the dirt out of the
clothes during wash and they push up the
heavy dirt to remove it during rinse.
Because the double washing method
using both air bubble & water current is
applied to this washer, wash efficiency is
excellent in comparison with the original
washer system.➢
➢
➢
➢ Applying Ag+ Ion Pulsator & Air Bubble
Washing System 
						

							2
PARTS AND FEATURES
The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.
NOTE
• The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book,Your
model may not include all features.
• COLD WATER TAP
After using the washing
machine, close the water tap.
ACCESSORIES
WATER TAP
ADAPTERINLET HOSEHOSE DRAIN
(FOR NON-PUMP)USER MANUAL COVER UNDER
UP
• CONTROL PANEL
• POWER CORD
• HOSE DRAIN
• ADJUSTABLE LEG
• LED LAMP (option)
• CASE DETERGENT
AND SOFTENER 
						

							3
WASHER SAFETY
Save these instructions
Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer, follow
basic precautions including the following:
Understanding your responsibilities
• Do not wash items that are soiled with vegetable or cooking oil.
These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire by itself.
•Do not use chlorine bleach and ammonia or acid (Such as vinegar or rust remover) in the
same wash. Hazardous fumes can form.
• Unplug power supply cord before attempting to service your washer.
• Do not wash fiber glass materials.
Small particles can stick to fabrics and cause skin irritation.
• Do not use hot water that temperature is over 50°C (120°F).
It can cause a deformation of plastic parts.
• Do not spray water on the control panel and back cover of the washer.
It can cause a fire or an electric shock.• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be
used or stored in near your washer.
Do not add flammable fluids to your wash
water.These substances give off vapors
that can create a fire hazard or explosion.
• Do not allow children to operate, play with,
or crawl on or inside your washer.
Supervise children closely when your
washer is used near them.
• After starting a cycle, do not reach into the
spin basket unless all motion stops.
• Do not tamper with the controls.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in
order to avoid a hazard
• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so it is not
subjected to splashing or ingress of
moisture.Please ...
• Have only a qualified person install, repair,
or replace parts on washer.
• Maintain washer properly.
• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.
• Do not install the washer at a place of
extremely high humidity. It could cause an
Electrical shock or a short circuit.
• Connect washer to the correct outlet,
electrical supply, water supply, and drain.
• Ground washer properly.
Read all instructions before using your washer 
						

							4
INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Install the washer on the horizontal solid floor.
• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an
uncovered concrete floor.
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose the washer.If the washer is installed on an unsuitable floor, it could make
considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
• Earthed electrical outlet(B) is required with 20cm of bottom
back of washer cabinet.
• Water faucets (C) must be within 1M of the upper back of
the washer cabinet and provide water pressure 0.3kgf/cm
2-
8kgf/cm2(0.03MPa ~ 0.8MPa).
• Connect the drain hose to the drain outlet at the back of the washer.
Non-Pump Model
NOTES
• The opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
UPC
B
A
DOWN
Drain hose 
						

							5
WARNING
• Electrical earth is required on this washer.
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.• Don’t earth to a gas pipe.
• Don’t change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washing machine is properly earthed.
ELECTRICAL REQUIREMENTS
1In case that it goes over
a door sill.
Don’t let the height of the
drain hose exceed 20cm
from the bottom of
washer.2In case of extending the
drain hose.
Don’t let the total length
exceed 3m.3Be careful that the end of
the drain hose is not
immersed in water.
Non-Pump Model
20Cm
3m
C
B
A
Electrical shock hazard : Failure to follow these instructions could result in
death or serious injury.
Recommended earthing method
For your personal safety, this washer must be earthed.
This washer is equipped with a power supply cord (A) having a earthing plug (B).
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle (C).
If a mating wall receptacle is not available, it is the personal responsibility and
obligation of the customer to have the proper earthed wall receptacle installed by a
qualified electrician. 
						

							6
INLET HOSE CONNECTION
For Ordinary Tap
1Pull down the collar of the
inlet hose to separate it
from the water tap
adapter.2Loosen the four screws
properly in fitting into
water tap.3Fit the water tap adapter
into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can attach
to the water tap tightly.
4Remove the tape, and
screw connector B into
connector A tightly.5Connect the inlet hose to
the water tap adapter by
pulling down the collar of
the hose end.6Connect the inlet hose
adapter of the hose to the
water inlet of the washing
machine by turning it
clockwise to be fixed
tightly.
For Screw-Shaped Tap
• Please check the rubber
packing inside the inlet hose
adapter of the hose.
Connector A
Connector BTAPE
1Connect the inlet hose to
the water tap by screwing
the connector tightly.2Connect the connector-
inlet supplied if
necessary.3Insert the inlet hose
adapter into the water
inlet of a washing
machine and turn it to be
fixed. .
* Check the packing in the inlet
Connector
Hose ConnectorRubber
PackingConnector
inlet
Connector
Hose ConnectorRubber
Packing 
						

							7
OPERATING YOUR WASHER
To obtain the best wahing results, you must operate your washer properly.
This section gives you this important information.
• Close zippers, snaps, and hooks to avoid
snagging other items.
Remove pins, buckles, and other hard
objects to avoid scratching the washer
interior.
• Empty pockets and turn them inside out.• Turn down cuffs and turn synthetic knits
out to avoid pilling.
• Tie strings and sashes so they will not
tangle.
• Treat spots and stains.
(see “Removing stains” on page16)
Preparing clothes for washing
• Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together.
• Separate dark colors from light colors, colorfast items from non-colorfast item.
Sorting
• Drop items into washer loosely. Items
should move easily through wash water
for best cleaning and wrinkle-free results.
• Load washer properly and select correct
load size setting.
Overloading and selecting a setting too
small for the wash load can:
- cause poor cleaning
- increase wrinkling
- create excessive lint
- wear out items faster (because of pilling)• Mix large and small items in each load.
Load evenly to maintain washer balance.
An off balance load can make the washer
vibrate during spin.
• Reduce wash time when using a small
load size setting. Loads with only a few
small items need less wash time.
• Use a large load size setting to reduce
wrinkling with permanent press clothes
and some synthetic knits. These items
should have more room to move in the
water than heavy items. (towels, jeans)
Loading 
						

							8
THE FUNCTIONS OF THE CONTROL PANEL
• Press this button to turn the power ON or OFF.
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
press the Start/Pause button →Select the course that you want to change
→press the Start/Pause button again.
• It can be used to select the full-automatic course.
• By turning(right) the Program Dial, course will be selected by following
order :
Auto/Fuzzy →Baby Care →Quick →Tub clean →Blanket →Wool →...
• This selection is effective for blue-jean, etc ...
• Washing time, rinse times and spin time are selected automatically depend
on amount of laundry.
• Select the desired amount of water depending on the amount of laundry.
• As the button is pressed, water level is selected by
MEDIUM →HIGH →EXTRA LOW →LOW →MEDIUM →...
• It can be used to adjust washing time.
• As the button is pressed, washing time will be repeated.
18 →OFF(0) →6 →10 →15 →18 →...
• Use it to change the number of rinses.
• As the button is pressed, the times of rinse will be repeated.
3 times →4 times →OFF(0) →1 time →2 times →3 times →....
• It can be used to change spin time.
• As the button is pressed, spin time will be repeated.
5 →7 →9 →OFF(0) →1 →3 →5 →7 →...
• Use it to set time reservation.
• If the Res. button is pressed, 2 is displayed. 
You can reserve it from 2 to 48 hours in advance.
• Each pressing of the button advances on time delay by one hour.
2 →3 →4 →… →46 →47 →48 →2 →3 →4 →…
• It can be used to adjust the wind-drying time after spin.
• As the button is pressed, the wind-drying time will be repeated as following;
10 →20 →30 →40 →0 
						

							9
WASHING PROCEDURE AND COURSE SELECTION
FULL AUTOMATIC COURSE
adjust to
‘Baby care’
1. AUTO/FUZZY COURSE(SENSOR) ;
• This selection is for general washing except extraordinary clothes.
• The sensor selects properly the various kind of washing condition such as washing time, rinse times,
spin time and water level.
2. BABY CARE COURSE ;
• This selection is dffective for baby clothes.
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• You may select the desired water level depending on the amount of laundry.
adjust to
‘Tub clean’
4. TUB CLEAN COURSE ;
• This selection is useful to clean the tub.
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• Washing time, rinse times, spin time, water level, and Res.(reserved washing) are not selectable with
Cleaning program.
• You can keep the tub clean by executing Tub Cleaning once a month.
adjust to
‘Quick’adjust water
level, washing
time, rinse time,
spin time
3. QUICK COURSE ;
• This selection is useful to reduce water consumption and washing time for less dirty clothes. 
						

							10
6. WOOL COURSE ;
• This selection is effective for wool clothes.
• Do not put leather clothes, or chamois clothes into the washing tub for washing.
It may cause shrinkage or deformation to the clothes.
• Please use the neutral detergents only.
• The water level is fixed to Medium.
• Do not exceed the recommended amount of laundry - 1.5kg.
• Only Medium and High water level with Wool program.
• Spin time, wash time, rinse times and Res.(reserved washing) are not selectable with Wool program.
adjust to
‘Wool’
5. BLANKET COURSE ;
• This selection is effective for washing heavy load(blanket, curtain, carpet, etc …).
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• You may select the desired water level depending on the amount of laundry.
adjust to
‘Blanket’adjust water
level, washing
time, rinse time,
spin time